Order No. supplements
Motor type |
Penultimate position: |
Final position: |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
50 Hz |
Without flange |
With flange |
With standard flange |
With special flange | |||||||
500 VY |
500 V? |
690 VY |
IM B3/6/7/8, IM V6, |
IM B5, IM V1 without protective cover 2) |
IM V1 without protective cover 2) |
IM V1 with protective cover 2)3) |
IM B35 |
IM B14, IM V18 without protective cover, IM V19 |
IM B34 |
IM B14, IM V18 without protective cover, IM V19 | |
No rated voltage range | |||||||||||
3 |
5 |
8 |
0 |
1 |
8 |
4 |
6 |
2 |
7 |
3 | |
1LG6 18 . ? . PM?? |
O |
O |
O |
? |
? |
– |
? |
? |
– |
– |
– |
1LG6 20 . ? . PM?? |
O |
O |
O |
? |
? |
– |
? |
? |
– |
– |
– |
1LG6 22 . ? . PM?? |
O |
O |
O |
? |
? |
– |
? |
? |
– |
– |
– |
1LG6 25 . ? . PM?? |
O |
O |
O |
? |
? |
– |
? |
? |
– |
– |
– |
1LG6 28 . ? . PM?? |
O |
O |
O |
? |
? |
– |
? |
? |
– |
– |
– |
1LG6 310 ? . PM??1LG6 313 ? . PM?? |
O |
O |
O |
? |
? |
– |
? |
? |
– |
– |
– |
1LG6 316 ? . PM??1LG6 317 ? . PM??1LG6 318 ? . PM?? |
O |
O |
O |
? 4) |
– |
? 5) |
? 5) |
? |
– |
– |
– |
? Standard version
O Without additional charge
? With additional charge
– Not possible
Order other voltages with voltage code9 in the penultimate position and the corresponding order code (see “Special versions” in the “Selection and ordering data” under “Voltages”).
Order other types of construction with type of construction code9 in the final position and the corresponding order code (see “Special versions” in the “Selection and ordering data” under “Types of construction”).
1) If motors 1LG6 183-... to 1LG6 318-... (motor series 1LG6 frame sizes 180 M to 315 L) in types of construction with feet IM B6, IM B7, IM V6 or IM V5 without protective cover are fixed to the wall, it is recommended that the motor feet are supported.
2) 1LG6 220-... to 1LG6 318-... motors (motor series 1LG6 frame sizes 225 S to 315 L) are supplied with two screw-in eyebolts in accordance with IM B5, whereby one can be rotated in accordance with IM V1 or IM V3. It is important to note that stress must not be applied perpendicular to the ring plane.
3) The “Second shaft extension” option, order codeK16 is not possible.
4) Type of construction IM V6/IM V5 without protective cover is only possible using type of construction code9 and order codeM1EandM1D.
5) 2-pole motors in 60 Hz version available on request.
Приводная техника