Siemens
ÑÐÅÄÑÒÂÀ ÏÐÎÌÛØËÅÍÍÎÉ ÀÂÒÎÌÀÒÈÇÀÖÈÈ
îôèöèàëüíûé ïàðòíåð Ñèìåíñ
Êàòàëîã ÑÀ01 2018
(4872) 700-366
skenergo@mail.ru

The most important directives and standards are listed below. These are used as basis for the SINAMICS G150 converter cabinet units and they must be carefully observed to achieve an EMC-compliant configuration that is safe both functionally and in operation.

European directives

2006/95/EC

Low-voltage directive:

Directive of the European Parliament and Council of December 12, 2006, on the approximation of the laws of the member states relating to electrical equipment designed for use within certain voltage limits

2006/42/EC

Machinery directive:

Directive of the European Parliament and Council of May 17, 2006 on machinery and for changing Directive 95/16/EC (amendment)

2004/108/EC

EMC directive:

Directive of the European Parliament and Council of December 15, 2004, which repeals directive 89/336/EEC, on the approximation of laws of the member states relating to electromagnetic compatibility

European standards

EN ISO 3744

Acoustics – Determination of the sound power level and sound energy level for noise sources that result from sound pressure measurements – envelope surface procedure of the accuracy class 2 for a largely free sound field over a reflecting plane

EN ISO 13849-1

Safety of machinery – Safety-related parts of control systems

Part 1: General design principles (ISO 13849‑1:2006) (replaced EN 954‑1)

EN 60146-1-1

Semiconductor converters – General requirements and line-commutated converters

Part 1‑1: Specification of basic requirements

EN 60204-1

Electrical equipment of machines

Part 1: General definitions

EN 60529

Degrees of protection provided by enclosures (IP code)

EN 61508-1

Functional safety of electrical/electronic/programmable electronic safety-related systems

Part 1: General requirements

EN 61800-2

Adjustable speed electrical power drive systems

Part 2: General requirements – Rating specifications for the measurement of low-voltage adjustable frequency AC power drive systems

EN 61800-3

Adjustable speed electrical power drive systems

Part 3: EMC product standard including special test procedure

EN 61800-5-1

Adjustable speed electrical power drive systems

Part 5: Safety requirements

Main section 1: Electrical and thermal requirements

EN 61800-5-2

Adjustable speed electrical power drive systems

Part 5-2: Safety requirements – Functional safety (IEC 61800‑5‑2:2007)



General technical specifications

Electrical specifications

 

Single connection

Parallel connection

Line voltages and power ranges

  • 380 ... 480 V 3 AC ±10% (‑15% < 1 min)

110 ... 560 kW

630 ... 900 kW

  • 500 ... 600 V 3 AC ±10% (‑15% < 1 min)

110 ... 560 kW

630 ... 1000 kW

  • 660 ... 690 V 3 AC ±10% (‑15% < 1 min)

75 ... 800 kW

1000 ... 2700 kW

Line system configurations

Grounded TN/TT systems or ungrounded IT systems (a grounded line conductor is not permissible in 690 V line supplies)

Line frequency

47 ... 63 Hz

Output frequency

0 ... 550 Hz1)

Line power factor

 

  • Fundamental

> 0.96

  • Total

0.75 ... 0.93

Efficiency

> 98%

Overvoltage category

III according to EN 61800-5-1

Control method

Vector control with and without encoder or V/f control

Fixed speeds

15 fixed speeds plus 1 minimum speed, parameterizable
(in the default setting, 3 fixed setpoints plus 1 minimum speed are selectable using terminal block / PROFIBUS)

Speed ranges that can be skipped

4, parameterizable

Setpoint resolution

0.001 rpm digital

12-bit analog

Braking operation

Optional via braking unit

Mechanical specifications

Degree of protection

IP20 (higher degrees of protection up to IP54 optional)

Protection class

I according to EN 61800‑5‑1

Touch protection

EN 50274 / BGV A3 when used for the intended purpose

Cabinet system

Rittal TS8, doors with double-bit key, three-section base plates for cable entry

Paint finish

RAL 7035 (indoor requirements)

Cooling method

Forced air cooling AF according to EN 60146

Ambient conditions

Storage

Transport

Operation

Ambient temperature

-25 ... +55 °C

-25 ... +70 °C
as of -40 °C for 24 hours

0 ... +40 °C
to +50 °C see derating data

Relative humidity

(condensation not permissible)

5 ... 95%

5 ... 95%
at 40 °C

5 ... 95%

 

Class 1K4 according to EN 60721‑3‑1

Class 2K3 according to EN 60721‑3‑2

Class 3K3 according to EN 60721‑3‑3

Environmental class / harmful chemical substances

Class 1C2 according to EN 60721‑3‑1

Class 2C2 according to EN 60721‑3‑2

Class 3C2 according to EN 60721‑3‑3

Organic/biological influences

Class 1B1 according to EN 60721‑3‑1

Class 2B1 according to EN 60721‑3‑2

Class 3B1 according to EN 60721‑3‑3

Degree of pollution

2 according to EN 61800‑5‑1

Installation altitude

Up to 2000 m above sea level without derating; > 2000 m see derating data

Mechanical stability

Storage

Transport

Operation

Vibratory load

 

  • Deflection

1.5 mm at 5 ... 9 Hz

3.1 mm at  ... 9 Hz

0.075 mm at 10 ... 58 Hz

  • Acceleration

5 m/s2 at > 9 ... 200 Hz

10 m/s2 at > 9 ... 200 Hz

10 m/s2 at > 58 â€¦ 200 Hz

 

Class 1M2 according to EN 60721‑3‑1

Class 2M2 according to EN 60721‑3‑2

Shock load

 

  • Acceleration

40 m/s2 for 22 ms

100 m/s2 for 11 ms

100 m/s2 for 11 ms

 

Class 1M2 according to EN 60721‑3‑1

Class 2M2 according to EN 60721‑3‑2

Class 3M4 according to EN 60721‑3‑3

Compliance with standards

CE marking

According to EMC Directive No. 2004/108/EC and Low Voltage Directive No. 2006/95/EC and Machinery Directive No. 2006/42/EC for functional safety

Radio interference suppression

The SINAMICS G150 converter systems are not designed for connection to the public power network ("first environment"). Radio interference suppression is compliant with the EMC product standard for variable-speed drives EN 61800‑3, "Second environment" (industrial networks). EMC disturbances can occur when connected to the public power networks. However, if supplementary measures are taken (e.g. line filter, see option L00) operation in the "first environment" is possible. 2)



Deviations from the specified classes are underlined.

1) The output frequency is also affected by the selected control method and the pulse frequency. For further information, please refer to the SINAMICS Low Voltage Engineering Manual.

2) Applies to motor cable lengths < 100 m.

Technical specifications for single connection

Line voltage 380 ... 480 V 3 AC

SINAMICS G150 converter cabinet units
6SL3710-1GE..-....

Single connection

32‑1.A3

32‑6.A3

33‑1.A3

33‑8.A3

35‑0.A3

36‑1.A3

37‑5.A3

38‑4.A3

41‑0.A3

Type rating

 

 

 

 

 

 

 

 

 

 

  • For IL at 50 Hz 400 V 1)

kW

110

132

160

200

250

315

400

450

560

  • For IH at 50 Hz 400 V 1)

kW

90

110

132

160

200

250

315

400

450

  • For IL at 60 Hz 460 V 2)

hp

150

200

250

300

400

500

600

600

800

  • For IH at 60 Hz 460 V 2)

hp

125

150

200

250

350

350

450

500

700

Output current

 

 

 

 

 

 

 

 

 

 

  • Rated current In

A

210

260

310

380

490

605

745

840

985

  • Base-load current IL3)

A

205

250

302

370

477

590

725

820

960

  • Base-load current IH4)

A

178

233

277

340

438

460

570

700

860

Input current

 

 

 

 

 

 

 

 

 

 

  • Rated input current 5)

A

229

284

338

395

509

629

775

873

1024

  • Input current, max.

A

335

410

495

606

781

967

1188

1344

1573

  • Current requirement, 24 V DC auxiliary power supply 6)

A

1.1

1.1

1.35

1.35

1.35

1.4

1.4

1.4

1.5

Rated short-circuit current

according to IEC 7)

kA

65

65

65

65

65

65

65

84

84

Minimum short-circuit current 8)

A

3000

3600

4400

4400

8000

10000

10500

16000/1800 9)

18400/2000 9)

Power loss, max. 10)

 

 

 

 

 

 

 

 

 

 

  • At 50 Hz 400 V

kW

2.9

3.8

4.4

5.3

6.4

8.2

9.6

10.1

14.4

  • At 60 Hz 460 V

kW

2.54

3.36

4.07

4.67

5.96

8.3

9.7

10.2

14.7

Cooling air requirement

m3/s

0.17

0.23

0.36

0.36

0.36

0.78

0.78

0.78

1.48

Sound pressure level

LpA (1 m) at 50/60 Hz

dB

67/68

69/73

69/73

69/73

69/73

70/73

70/73

70/73

72/75

Cable lengths

between converter and motor 11)

 

 

 

 

 

 

 

 

 

 

  • Shielded

m

300

300

300

300

300

300

300

300

300

  • Unshielded

m

450

450

450

450

450

450

450

450

450

Dimensions

 

 

 

 

 

 

 

 

 

 

  • Width for
    version A/C

mm

800/400

800/400

800/400

1000/400

1000/400

1200/600

1200/600

1200/600

1600/1000

  • Height 12)

mm

2000

2000

2000

2000

2000

2000

2000

2000

2000

  • Depth

mm

600

600

600

600

600

600

600

600

600

Weight, approx.

(degree of protection IP20, without options) for version A/C

kg

460/225

460/225

670/300

670/300

670/300

750/670

750/670

780/670

1100/880



Note: The power data in hp units is based on the NEC/CEC standards for the North American market.

For information on the line connection, motor connection and cabinet grounding, see Section Configuration.

1) Rated output of a typical 6-pole standard induction motor based on IL or IH for 3 AC 50 Hz 400 V.

2) Rated output of a typical 6-pole standard induction motor based on IL or IH for 3 AC 60 Hz 460 V.

3) The base-load current IL is based on a load cycle of 110% for 60 s or 150% for 10 s with a load cycle duration of 300 s. See Characteristic curves, Section Overload capability.

4) The base-load current IH is based on a duty cycle of 150% for 60 s or 160% for 10 s with a duty cycle duration of 300 s. See Characteristic curves, Section Overload capability.

5) The currents listed here are based on the rated output current.

6) If the drive control is to remain active after a main infeed failure, the converter must be externally supplied with 24 V DC.
The following must also be taken into account:
– CU320-2: 1 A
– TM31: 0.5 A
– AOP30: 0.2 A
– SMC: 0.6 A
– Current requirement of digital inputs/outputs.

7) In conjunction with the specified fuses or circuit breakers.

8) Minimum current required for reliably triggering the protective devices.

9) For option L26 (version A) the low value applies.

10) The specified power losses are the maximum values for a utilization of 100%. The values are lower under normal operating conditions.

11) Longer cable lengths for specific configurations are available on request.

12)Version A: The cabinet height increases by
– 250 mm for degree of protection IP21
– 400 mm for degrees of protection IP23, IP43 and IP54
– 405 mm for options M13 and M78

Version C: The cabinet height increases by
– 250 mm for degree of protection IP21
– 400 mm for degrees of protection IP23, IP43 and IP54

Line voltage 500 ... 600 V 3 AC

SINAMICS G150 converter cabinet units
6SL3710-1GF..-....

Single connection

31‑8.A3

32‑2.A3

32‑6.A3

33‑3.A3

34‑1.A3

34‑7.A3

35‑8.A3

37‑4.A3

38‑1.A3

Type rating

 

 

 

 

 

 

 

 

 

 

  • For IL at 50 Hz 500 V 1)

kW

110

132

160

200

250

315

400

500

560

  • For IH at 50 Hz 500 V 1)

kW

90

110

132

160

200

250

315

450

500

  • For IL at 60 Hz 575 V 2)

hp

150

200

250

300

400

450

600

700

800

  • For IH at 60 Hz 575 V 2)

hp

150

200

200

250

350

450

500

700

700

Output current

 

 

 

 

 

 

 

 

 

 

  • Rated current In

A

175

215

260

330

410

465

575

735

810

  • Base-load current IL3)

A

171

208

250

320

400

452

560

710

790

  • Base-load current IH4)

A

157

192

233

280

367

416

514

657

724

Input current

 

 

 

 

 

 

 

 

 

 

  • Rated input current 5)

A

191

224

270

343

426

483

598

764

842

  • Input current, max.

A

279

341

410

525

655

740

918

1164

1295

  • Current requirement, 24 V DC auxiliary power supply 6)

A

1.35

1.35

1.35

1.4

1.4

1.4

1.4

1.5

1.5

Rated short-circuit current

according to IEC 7)

kA

65

65

65

65

65

65

65

84

84

Minimum short-circuit current 8)

A

2400

3000

3600

5200

5200

6200

8400

10500

10400/1800 9)

Power loss, max. 10)

 

 

 

 

 

 

 

 

 

 

  • At 50 Hz 500 V

kW

3.8

4.2

5

6.1

8.1

7.8

8.7

12.7

14.1

  • At 60 Hz 575 V

kW

3.2

3.6

4.1

5.1

6.7

7.5

8.4

12.5

13.8

Cooling air requirement

m3/s

0.36

0.36

0.36

0.36

0.78

0.78

0.78

1.48

1.48

Sound pressure level

LpA (1 m) at 50/60 Hz

dB

69/73

69/73

69/73

69/73

72/75

72/75

72/75

72/75

72/75

Cable lengths

between converter and motor 11)

 

 

 

 

 

 

 

 

 

 

  • Shielded

m

300

300

300

300

300

300

300

300

300

  • Unshielded

m

450

450

450

450

450

450

450

450

450

Dimensions

 

 

 

 

 

 

 

 

 

 

  • Width for
    version A/C

mm

800/400

800/400

800/400

800/400

1200/600

1200/600

1200/600

1600/1000

1600/1000

  • Height 12)

mm

2000

2000

2000

2000

2000

2000

2000

2000

2000

  • Depth

mm

600

600

600

600

600

600

600

600

600

Weight, approx.

(degree of protection IP20, without options) for version A/C

kg

460/300

460/300

460/300

460/300

750/670

750/670

860/670

1150/940

1150/960



Note: The power data in hp units is based on the NEC/CEC standards for the North American market.

For information on the line connection, motor connection and cabinet grounding, see Section Configuration.

1) Rated output of a typical 6-pole standard induction motor based on IL or IH for 3 AC 50 Hz 500 V.

2) Rated output of a typical 6-pole standard induction motor based on IL or IH for 3 AC 60 Hz 575 V.

3) The base-load current IL is based on a load cycle of 110% for 60 s or 150% for 10 s with a load cycle duration of 300 s. See Characteristic curves, Section Overload capability.

4) The base-load current IH is based on a duty cycle of 150% for 60 s or 160% for 10 s with a duty cycle duration of 300 s. See Characteristic curves, Section Overload capability.

5) The currents listed here are based on the rated output current.

6) If the drive control is to remain active after a main infeed failure, the converter must be externally supplied with 24 V DC.
The following must also be taken into account:
– CU320-2: 1 A
– TM31: 0.5 A
– AOP30: 0.2 A
– SMC: 0.6 A
– Current requirement of digital inputs/outputs.

7) In conjunction with the specified fuses or circuit breakers.

8) Minimum current required for reliably triggering the protective devices.

9) For option L26 (version A) the low value applies.

10) The specified power losses are the maximum values for a utilization of 100%. The values are lower under normal operating conditions.

11) Longer cable lengths for specific configurations are available on request.

12)Version A: The cabinet height increases by
– 250 mm for degree of protection IP21
– 400 mm for degrees of protection IP23, IP43 and IP54
– 405 mm for options M13 and M78

Version C: The cabinet height increases by
– 250 mm for degree of protection IP21
– 400 mm for degrees of protection IP23, IP43 and IP54

Line voltage 660 ... 690 V 3 AC

SINAMICS G150 converter cabinet units
6SL3710-1GH..-....

Single connection

28‑5.A3

31‑0.A3

31‑2.A3

31‑5.A3

31‑8.A3

32‑2.A3

32‑6.A3

Type rating

 

 

 

 

 

 

 

 

  • For IL at 50 Hz 690 V 1)

kW

75

90

110

132

160

200

250

  • For IH at 50 Hz 690 V 1)

kW

55

75

90

110

132

160

200

Output current

 

 

 

 

 

 

 

 

  • Rated current In

A

85

100

120

150

175

215

260

  • Base-load current IL 2)

A

80

95

115

142

171

208

250

  • Base-load current IH 3)

A

76

89

107

134

157

192

233

Input current

 

 

 

 

 

 

 

 

  • Rated input current 4)

A

93

109

131

164

191

224

270

  • Input current, max.

A

131

155

188

232

279

341

410

  • Current requirement, 24 V DC auxiliary power supply 5)

A

1.1

1.1

1.1

1.1

1.35

1.35

1.35

Rated short-circuit current

according to IEC 6)

kA

65

65

65

65

65

65

65

Minimum short-circuit current 7)

A

1500

1500

1200

1600

2400

3000

3600

Power loss, max. 8)

at 50 Hz 690 V

kW

1.7

2.1

2.7

2.8

3.8

4.2

5

Cooling air requirement

m3/s

0.17

0.17

0.17

0.17

0.36

0.36

0.36

Sound pressure level

LpA (1 m) at 50/60 Hz

dB

67/68

67/68

67/68

67/68

67/73

67/73

67/73

Cable lengths

between converter and motor 9)

 

 

 

 

 

 

 

 

  • Shielded

m

300

300

300

300

300

300

300

  • Unshielded

m

450

450

450

450

450

450

450

Dimensions

 

 

 

 

 

 

 

 

  • Width for
    version A/C

mm

800/400

800/400

800/400

800/400

800/400

800/400

800/400

  • Height 10)

mm

2000

2000

2000

2000

2000

2000

2000

  • Depth

mm

600

600

600

600

600

600

600

Weight, approx.

(degree of protection IP20, without options) for version A/C

kg

460/225

460/225

460/225

460/225

670/300

670/300

670/300



Note: The power data in hp units is based on the NEC/CEC standards for the North American market.

For information on the line connection, motor connection and cabinet grounding, see Section Configuration.

1) Rated output of a typical 6-pole standard induction motor based on IL or IH for 3 AC 50 Hz 690 V.

2) The base-load current IL is based on a load cycle of 110% for 60 s or 150% for 10 s with a load cycle duration of 300 s. See Characteristic curves, Section Overload capability.

3) The base-load current IH is based on a duty cycle of 150% for 60 s or 160% for 10 s with a duty cycle duration of 300 s. See Characteristic curves, Section Overload capability.

4) The currents listed here are based on the rated output current.

5) If the drive control is to remain active after a main infeed failure, the converter must be externally supplied with 24 V DC.
The following must also be taken into account:
– CU320-2: 1 A
– TM31: 0.5 A
– AOP30: 0.2 A
– SMC: 0.6 A
– Current requirement of digital inputs/outputs.

6) In conjunction with the specified fuses or circuit breakers.

7) Minimum current required for reliably triggering the protective devices.

8) The specified power losses are the maximum values for a utilization of 100%. The values are lower under normal operating conditions.

9) Longer cable lengths for specific configurations are available on request.

10)Version A: The cabinet height increases by
– 250 mm for degree of protection IP21
– 400 mm for degrees of protection IP23, IP43 and IP54
– 405 mm for options M13 and M78

Version C: The cabinet height increases by
– 250 mm for degree of protection IP21
– 400 mm for degrees of protection IP23, IP43 and IP54

Line voltage 660 ... 690 V 3 AC

SINAMICS G150 converter cabinet units
6SL3710-1GH..-....

Single connection

33‑3.A3

34‑1.A3

34‑7.A3

35‑8.A3

37‑4.A3

38‑1.A3

Type rating

 

 

 

 

 

 

 

  • For IL at 50 Hz 690 V 1)

kW

315

400

450

560

710

800

  • For IH at 50 Hz 690 V 1)

kW

250

315

400

450

560

710

Output current

 

 

 

 

 

 

 

  • Rated current In

A

330

410

465

575

735

810

  • Base-load current IL 2)

A

320

400

452

560

710

790

  • Base-load current IH 3)

A

280

367

416

514

657

724

Input current

 

 

 

 

 

 

 

  • Rated input current 4)

A

343

426

483

598

764

842

  • Input current, max.

A

525

655

740

918

1164

1295

  • Current requirement, 24 V DC auxiliary power supply 5)

A

1.35

1.4

1.4

1.4

1.5

1.5

Rated short-circuit current

according to IEC 6)

kA

65

65

84

84

85

85

Minimum short-circuit current 7)

A

5200

5200

6200

8400

10500

10400/1800 8)

Power loss, max. 9)

at 50 Hz 690 V

kW

6.1

8.1

9.1

10.8

13.5

14.7

Cooling air requirement

m3/s

0.36

0.78

0.78

0.78

1.48

1.48

Sound pressure level

LpA (1 m) at 50/60 Hz

dB

67/73

72/75

72/75

72/75

72/75

72/75

Cable lengths

between converter and motor 10)

 

 

 

 

 

 

 

  • Shielded

m

300

300

300

300

300

300

  • Unshielded

m

450

450

450

450

450

450

Dimensions

 

 

 

 

 

 

 

  • Width for
    version A/C

mm

800/400

1200/600

1200/600

1200/600

1600/1000

1600/1000

  • Height 11)

mm

2000

2000

2000

2000

2000

2000

  • Depth

mm

600

600

600

600

600

600

Weight, approx.

(degree of protection IP20, without options) for version A/C

kg

670/300

780/670

780/670

840/670

1320/940

1360/980



Note: The power data in hp units is based on the NEC/CEC standards for the North American market.

For information on the line connection, motor connection and cabinet grounding, see Section Configuration.

1) Rated output of a typical 6-pole standard induction motor based on IL or IH for 3 AC 50 Hz 690 V.

2) The base-load current IL is based on a load cycle of 110% for 60 s or 150% for 10 s with a load cycle duration of 300 s. See Characteristic curves, Section Overload capability.

3) The base-load current IH is based on a duty cycle of 150% for 60 s or 160% for 10 s with a duty cycle duration of 300 s. See Characteristic curves, Section Overload capability.

4) The currents listed here are based on the rated output current.

5) If the drive control is to remain active after a main infeed failure, the converter must be externally supplied with 24 V DC.
The following must also be taken into account:
– CU320-2: 1 A
– TM31: 0.5 A
– AOP30: 0.2 A
– SMC: 0.6 A
– Current requirement of digital inputs/outputs.

6) In conjunction with the specified fuses or circuit breakers.

7) Minimum current required for reliably triggering the protective devices.

8) For option L26 (version A) the low value applies.

9) The specified power losses are the maximum values for a utilization of 100%. The values are lower under normal operating conditions.

10) Longer cable lengths for specific configurations are available on request.

11)Version A: The cabinet height increases by
– 250 mm for degree of protection IP21
– 400 mm for degrees of protection IP23, IP43 and IP54
– 405 mm for options M13 and M78

Version C: The cabinet height increases by
– 250 mm for degree of protection IP21
– 400 mm for degrees of protection IP23, IP43 and IP54

Technical specifications for parallel connection

 

SINAMICS G150 converter cabinet units, version A
6SL3710-2GE..-....

SINAMICS G150 converter cabinet units, version A
6SL3710-2GF..-....

Parallel connection

41‑1AA3

41‑4AA3

41‑6AA3

38‑6AA3

41‑1AA3

41‑4AA3

Line voltage

 

380 ... 480 V 3 AC

500 ... 600 V 3 AC

Type rating

 

 

 

 

 

 

 

  • For IL1)

kW

630

710

900

630

710

1000

  • For IH1)

kW

500

560

710

560

630

800

  • For IL at 60 Hz 460 V or 575 V 2)

hp

900

1000

1250

900

1000

1250

  • For IH at 60 Hz 460 V or 575 V 2)

hp

700

900

1000

800

900

1000

Output current

 

 

 

 

 

 

 

  • Rated current In 3)

A

1120

1380

1560

860

1070

1360

  • Base-load current IL3)4)

A

1092

1340

1516

836

1036

1314

  • Base-load current IH3)5)

A

850

1054

1294

770

950

1216

Input current

 

 

 

 

 

 

 

  • Rated input current 3)6)

A

1174

1444

1624

904

1116

1424

  • Input current, max.

A

1800

2215

2495

1388

1708

2186

  • Current requirement, 24 V DC auxiliary power supply 7)

A

2.8

2.8

3

2.8

2.8

3

Rated short-circuit current

according to IEC 8)

kA

2 Ã— 65

2 Ã— 65

2 Ã— 65

2 Ã— 65

2 Ã— 65

2 Ã— 84

Minimum short-circuit current 9)

A

2 Ã— 1000

2 Ã— 10500

2 Ã— 1800

2 Ã— 6200

2 Ã— 8400

2 Ã— 10500

Power loss, max. 10)

 

 

 

 

 

 

 

  • At 50 Hz 400 V / 500 V

kW

16.2

19

19.9

15.4

17.2

23.8

  • At 60 Hz 460 V / 575 V

kW

16.6

19.4

20.4

15

16.8

25

Cooling air requirement

m3/s

1.56

1.56

1.56

1.56

1.56

2.96

Sound pressure level

LpA (1 m) at 50/60 Hz

dB

73/76

73/76

73/76

75/78

75/78

75/78

Cable lengths

between converter and motor 11)

 

 

 

 

 

 

 

  • Shielded

m

300

300

300

300

300

300

  • Unshielded

m

450

450

450

450

450

450

Dimensions

 

 

 

 

 

 

 

  • Width 12)

mm

2400

2400

2400

2400

2400

3200

  • Height 13)

mm

2000

2000

2000

2000

2000

2000

  • Depth

mm

600

600

600

600

600

600

Weight, approx.

(degree of protection IP20, without options)

kg

1700

1710

2130

1700

1700

2620



Note: The power data in hp units is based on the NEC/CEC standards for the North American market.

For information on the line connection, motor connection and cabinet grounding, see Section Configuration.

1) Rated output of a typical 6-pole standard induction motor based on IL or IH at 3 AC 50 Hz 400 V, 500 V or 690 V.

2) Rated output of a typical 6-pole standard induction motor based on IL or I or H at 3 AC 60 Hz 460 V or 575 V.

3) The currents specified here are the total current of both converter sections.

4) The base-load current IL is based on a load cycle of 110% for 60 s or 150% for 10 s with a load cycle duration of 300 s. See Characteristic curves, Section Overload capability.

5) The base-load current IH is based on a duty cycle of 150% for 60 s or 160% for 10 s with a duty cycle duration of 300 s. See Characteristic curves, Section Overload capability.

6) The currents listed here are based on the rated output current.

7) If the drive control is to remain active after a main infeed failure, the converter must be externally supplied with 24 V DC.
The following must also be taken into account:
– CU320-2: 1 A
– TM31: 0.5 A
– AOP30: 0.2 A
– SMC: 0.6 A
– Current requirement of digital inputs/outputs.

8) In conjunction with the specified fuses or circuit breakers.

9) Minimum current required for reliably triggering the protective devices.

10) The specified power losses are the maximum values for a utilization of 100%. The values are lower under normal operating conditions.

11) Longer cable lengths for specific configurations are available on request.

12) The power units connected in parallel are supplied as two transport units.

13) The cabinet height increases by
– 250 mm for degree of protection IP21
– 400 mm for degrees of protection IP23, IP43 and IP54
– 405 mm for options M13 and M78

 

SINAMICS G150 converter cabinet units, version A
6SL3710-2GH..-....

Parallel connection

41‑1AA3

41‑4AA3

41‑5AA3

41‑8EA3

42‑0EA3

42‑2EA3

42‑4E A3

42‑7E A3

Line voltage

660 ... 690 V 3 AC

Type rating

 

 

 

 

 

 

 

 

 

  • For IL1)

kW

1000

1350

1500

1750

1950

2150

2400

2700

  • For IH1)

kW

900

1200

1350

1500

1750

1950

2150

2400

  • For IL at 60 Hz 460 V or 575 V 2)

hp

  • For IH at 60 Hz 460 V or 575 V 2)

hp

Output current

 

 

 

 

 

 

 

 

 

  • Rated current In 3)

A

1070

1360

1500

1729

1948

2158

2413

2752

  • Base-load current IL3)4)

A

1036

1314

1462

1720

1940

2150

2390

2685

  • Base-load current IH3)5)

A

950

1216

1340

1547

1742

1930

2158

2463

Input current

 

 

 

 

 

 

 

 

 

  • Rated input current 3)6)

A

1116

1424

1568

1800

2030

2245

2510

2865

  • Input current, max.

A

1708

2186

2406

2765

3115

3450

3860

4400

  • Current requirement, 24 V DC auxiliary power supply 7)

A

2.8

2.8

3

4.7

4.7

4.7

4.7

6

Rated short-circuit current

according to IEC 8)

kA

2 Ã— 65

2 Ã— 84

2 Ã— 84

2 Ã— 85

2 Ã— 85

2 Ã— 85

2 Ã— 85

2 Ã— 85

Minimum short-circuit current 9)

A

2 Ã— 8400

2 Ã— 10500

2 Ã— 1800

2 Ã— 1800

2 Ã— 2000

2 Ã— 2300

2 Ã— 2500

2 Ã— 3000

Power loss, max. 10)

at 50 Hz 690 V

kW

21.3

26.6

29

35

38

40

46

52

Cooling air requirement

m3/s

1.56

2.96

2.96

3.67

3.67

3.67

3.67

5.15

Sound pressure level

LpA (1 m) at 50/60 Hz

dB

75/78

75/78

75/78

75/78

75/78

75/78

75/78

75/78

Cable lengths

between converter and motor 11)

 

 

 

 

 

 

 

 

 

  • Shielded

m

300

300

300

300

300

300

300

300

  • Unshielded

m

450

450

450

450

450

450

450

450

Dimensions

 

 

 

 

 

 

 

 

 

  • Width 12)

mm

2400

3200

3200

3600

3600

3600

3600

4400

  • Height 13)

mm

2000

2000

2000

2000

2000

2000

2000

2000

  • Depth

mm

600

600

600

600

600

600

600

600

Weight, approx.

(degree of protection IP20, without options)

kg

1700

2620

2700

3010

3010

3070

3860

4580



Note: The power data in hp units is based on the NEC/CEC standards for the North American market.

For information on the line connection, motor connection and cabinet grounding, see Section Configuration.

1) Rated output of a typical 6-pole standard induction motor based on IL or IH at 3 AC 50 Hz 400 V, 500 V or 690 V.

2) Rated output of a typical 6-pole standard induction motor based on IL or I or H at 3 AC 60 Hz 460 V or 575 V.

3) The currents specified here are the total current of both converter sections.

4) The base-load current IL is based on a load cycle of 110% for 60 s or 150% for 10 s with a load cycle duration of 300 s. See Characteristic curves, Section Overload capability.

5) The base-load current IH is based on a duty cycle of 150% for 60 s or 160% for 10 s with a duty cycle duration of 300 s. See Characteristic curves, Section Overload capability.

6) The currents listed here are based on the rated output current.

7) If the drive control is to remain active after a main infeed failure, the converter must be externally supplied with 24 V DC.
The following must also be taken into account:
– CU320-2: 1 A
– TM31: 0.5 A
– AOP30: 0.2 A
– SMC: 0.6 A
– Current requirement of digital inputs/outputs.

8) In conjunction with the specified fuses or circuit breakers.

9) Minimum current required for reliably triggering the protective devices.

10) The specified power losses are the maximum values for a utilization of 100%. The values are lower under normal operating conditions.

11) Longer cable lengths for specific configurations are available on request.

12) The power units connected in parallel are supplied as two transport units.

13) The cabinet height increases by
– 250 mm for degree of protection IP21
– 400 mm for degrees of protection IP23, IP43 and IP54
– 405 mm for options M13 and M78

















skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Àðìàòóðà DENDOR

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Äàò÷èêè è èçìåðèòåëè

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ðåãóëÿòîðû è ðåãèñòðàòîðû

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ïíåâìàòè÷åñêîå îáîðóäîâàíèå

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Êðàíû è Êëàïàíû

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Èçìåðèòåëüíûå ïðèáîðû

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ñèñòåìû áåñïðîâîäíîãî óïðàâëåíèÿ «óìíûé äîì»

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Áåñêîíòàêòíûå âûêëþ÷àòåëè Êîíå÷íûå âûêëþ÷àòåëè Îïòè÷åñêèå äàò÷èêè Ýíêîäåðû

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Óñòàíîâêà óìÿã÷åíèÿ

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Óñòàíîâêà îáåçæåëåçèâàíèÿ
Êàòàëîã îáîðóäîâàíèÿ 2018
Siemens Industry Catalog Drive technology Automation technology Automation systems Operator control and monitoring systems SIMATIC HMI Identification systems Industrial communication Introduction Industrial Ethernet PROFINET Introduction Drive systems SINAMICS G SINAMICS G120 standard inverters SINAMICS G120C compact inverters SINAMICS G120P and G120P Cabinet pump, fan, compressor converters SINAMICS G120D distributed inverters SINAMICS G130 Drive converter chassis units SINAMICS G150 Drive converter cabinet units SINAMICS S high-performance drives SINAMICS medium voltage converters DC converters Controllers SIMATIC PCS 7 process control systems Distributed I/O Motion control systems CNC controls Operator panels Industrial PC Switching and protection devices for power distribution Power Monitoring SENTRON measuring devices Configuring, Visualizing and Controlling with SIMATIC Configuring, Visualizing and Controlling with SENTRON Industrial identification systems Network components Industrial controls SITOP power supplies Software and tools Network management and diagnostics Technology components PROFIBUS AS-Interface IO-Link Industrial wireless communication Industrial remote communication Industrial security Industrial controls Industry software PC-based Automation Process control systems Process instrumentation Process analytics SITOP power supply Products for specific requirements Energy Building Technologies Low-Voltage controls and distribution Safety Systems - Safety Integrated Market-specific solutions Industry Services Software ... and everything else you need




  © ÎÎÎ "ÑÊ ÝÍÅÐÃÎ" 2007-2022
  (4872) 700-366  skenergo@mail.ru
ßíäåêñ.Ìåòðèêà