Fields of application

• Measurement for boiler control in incineration plants
• Emission measurements in incineration plants
• Measurement in the automotive industry (test benches)
• Warning equipment
• Process gas concentrations in chemical plants
• Trace measurements in pure gas processes
• Environmental protection
• TLV (Threshold Limit Value) monitoring at the workplace
• Quality monitoring
• Ex versions for analyzing flammable and non-flammable gases or vapors for use in hazardous areas

Special versions

Special applications

Besides the standard combinations, special applications concerning material in the gas path, material in the sample chambers (e.g. Titan, Hastelloy C22) and measured components are also available on request

Performance-tested version / QAL

For measurements of CO, NO, SO₂ and O₂ according to 13th and 27th BlmSchV and TA Luft, performance-tested versions according to EN 15267 are available.
Certified measuring ranges:

• 1-component analyzer
  CO: 0 to 75 mg/mі; 0 to 10 000 mg/mі
  NO: 0 to 100 mg/m³; 0 to 10 000 mg/mі
  SO₂: 0 to 75 mg/m³; 0 to 1 500 mg/mі
• O₂: 0 to 5 vol.%; 0 to 25 vol.%

In addition, performance-tested versions of the ULTRAMAT 6 meet the requirements set forth in EN 14956 and QAL 1 according to EN 14181. The conformity of devices with both standards is accelerated by the TГњV.
The determination of the device drift according to EN 14181 (QAL 3) can be done manually as well as with the SIPROM GA maintenance and service software on the PLC. In addition, selected manufacturers of emission evaluation computers offer the possibility for downloading the drift data via the analyzer's serial interface and to automatically record and process it in the evaluation computer.

Flow-type reference compartment

• The flow through the reference compartment should be adapted to the sample gas flow
• The gas supply of the reduced flow-type reference compartment should have an upstream pressure of 3 000 to 5 000 hPa (abs.). The flow is then automatically regulated at approximately 8 ml/min using a restrictor