SIPROCESS GA700 . Обзор. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPROCESS GA700

The SIPROCESS GA700 range is the latest generation of Siemens gas analyzers, and features a modular design. Up to two modules can be used per basic unit.

Basic unit

The basic unit is available in three models: as a 19" rack unit with 3 height units, in a housing for wall mounting and as an Ex d field device. The communication interfaces present in the basic units can be adapted to the respective process environment or the process control system using additional optionally available electronics modules.

Modules

Depending on the measuring task, the SIPROCESS GA700 can be individually adapted to the respective analytical or process requirements by fitting selectable modules.

Module	Measuring task
ULTRAMAT 7	The ULTRAMAT 7 module is used for highly-selective measurement of infrared-active components such as CO, CO₂, NO, CH₄ or SO₂. In general, the field of application ranges from all types of emission measurements to use in processes. These are used to control production processes and guarantee product quality, even in the presence of highly corrosive gases.
OXYMAT 7	The OXYMAT 7 module is used to measure oxygen between 0 to 0.5% (smallest measuring range) and 0 to 100% (largest measuring range). It is designed for use at ambient temperatures up to 50 °C and allows highly exact measurements through application of the paramagnetic alternating pressure principle. Thanks to the modular design, the OXYMAT 7 module can be combined with an additional module.
CALOMAT 7	For determining the concentration of hydrogen and inert gases in digital mixtures through measurement of thermal conductivity. The CALOMAT 7 module features a high dynamic measuring range (e.g. 0 ... 0.5% and 0 ... 100% H₂, configurable) and a short T₉₀ time.

Field control unit

The field control unit with Ex-d explosion protection and flameproof enclosure is approved for use in Zone 1 (ATEX / IECEx approval). Together with the OXYMAT 7 analyzer module it can be used for measuring the oxygen content of flammable or non-flammable gases.