Accuracy

Typical, depending on accuracy of measurements of installation

• 2-path: ≤ ± (0.5 вЂ¦ 1.5 %)

• 1-path: ≤ ± (1 вЂ¦ 3 %)

Note:
Accuracy depends on the accuracy of the measurements taken at location. This means that inaccurate measurements of angles, distance between transducers, wall thickness and pipe diameter have a direct effect on the accuracy. Values measured are entered into the memory of the FUS060 or FUS080 transmitter.

Requirements for pipes

Size

FUS060:
DN 100 вЂ¦ DN 3000 (4” вЂ¦ 120”)

FUS080:
DN 100 вЂ¦ DN 1200 (4”  вЂ¦ 48”)

Line pressure

max. 40 bar (580 psi)

Media temperature

• Standard version

-10 вЂ¦ +200 °C (14 вЂ¦ 392 °F)

• ATEX Ex d version (FUS060)

-20 вЂ¦ +180 °C (-4 вЂ¦ +356 °F)

• ATEX Ex i version (FUS060)

-10 вЂ¦ +190 °C (14 вЂ¦ 374 °F)

Ambient temperature sensor

• Standard and Ex-i version

-20 вЂ¦ +60 °C (-4 вЂ¦ +140 °F)

• Ex d version

-20 вЂ¦ +180 °C (-4 вЂ¦ +356 °F)

Transducer enclosure/approvals/certificates

Standard version

IP67 (NEMA 6)/IP68 (NEMA 6P)

Ex approval

System ATEX approval for SONO 3200 Ex i transducers together with transmitter FUS060-Ex:
ATEX II 2 G Ex dem [ia/Ib] IIC T6/T4/T3 Gb or

ATEX II 2G Ex d T3-T6 Gb with SONO 3200 Ex d transducers (for standard FUS060 transmitter, installed outside of Ex zone)

Material certificates

EN 10204-3.1 material certificate on transducer mounting parts

Transducer materials

Terminal housing

Standard version:
PA 6.6, 100 °C (212 °F) or stainless steel
AISI 316, 200 °C (392 °F)

Transducer body

Standard version:
Stainless steel AISI 316, 200 °C (392 °F)

Materials of existing pipeline

Steel

Transducer holder: EN 10273 or EN 10216 (P235GH)

Mounting plates ¹⁾: EN 10273 or EN 10216 (P235GH)

Concrete

Transducer holder: Stainless steel AISI 316 or similar

Mounting plates ¹⁾: (not included)

Stainless steel

Transducer holder: Stainless steel AISI 316 or similar

Mounting plates ¹⁾: Stainless steel AISI 316 or similar

Pipe wall thickness

Steel pipe (AISI 316 and St. 37.2 or corresponding material)

Transducer and holder available in length L = 160, allowing a pipe wall thickness up to 20 mm (0.79”)

Concrete pipe

Transducer and holder available in length L = 230, allowing a pipe wall thickness up to 200 mm (7.9”) and pipe sizes в‰Ґ DN 600.

Dimension of the package box

856 x 390 x 344 mm
(33.7“ x 15.4“ x 13.5“)

(L x W x H)

Weight example of a package

approx. 53 kg (116.8 lb)

(standard 2-path with FUS060)

Certificates and approvals

Conformity certificate

The devices are supplied as standard with a Siemens Certificate of Conformity on a DVD.

Material certificate

Material certificate for the transducer parts according to EN 10204-3.1 is optionally available.

Approvals

No custody transfer approvals