Flowmeter SONOKIT (with FUS060 or FUS080) . Технические данные. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на Flowmeter SONOKIT (with FUS060 or FUS080)

| | | | | | | | |

Flowmeter SONOKIT (with FUS060 or FUS080)

The transmitter related to this system is the SITRANS FUS080 or FUS060.

The technical specifications to the FUS060 see page 3/.. and to FUS080 see page 3/..

Accuracy
Typical, depending on accuracy of measurements of installation	2-path: ? ± (0.5 … 1.5 %)
	1-path: ? ± (1 … 3 %)
Note: Accuracy depends on the accuracy of the measurements taken at location. This means that inaccurate measurements of angles, distance between transducers, wall thickness and pipe diameter have a direct effect on the accuracy. Values measured are entered into the memory of the FUS060 or FUS080 transmitter.

Requirements for pipes

Requirements for pipes
Size	FUS060: DN 100 … DN 3000 (4” … 120”) FUS080: DN 100 … DN 1200 (4” … 48”)
Line pressure	max. 40 bar (580 psi)
Media temperature
Standard version	-10 … +200 °C (14 … 392 °F)
ATEX Ex d version (FUS060)	-20 … +180 °C (-4 … +356 °F)
ATEX Ex i version (FUS060)	-10 … +190 °C (14 … 374 °F)
Ambient temperature sensor
Standard and Ex-i version	-20 … +60 °C (-4 … +140 °F)
Ex d version	-20 … +180 °C (-4 … +356 °F)
Transducer enclosure/approvals/certificates
Standard version	IP67 (NEMA 6)/IP68 (NEMA 6P)
Ex approval	System ATEX approval for SONO 3200 Ex i transducers together with transmitter FUS060-Ex: ATEX II 2 G Ex dem [ia/Ib] IIC T6/T4/T3 Gb or
Ex approval	ATEX II 2G Ex d T3-T6 Gb with SONO 3200 Ex d transducers (for standard FUS060 transmitter, installed outside of Ex zone)
Material certificates	EN 10204-3.1 material certificate on transducer mounting parts
Transducer materials
Terminal housing	Standard version: PA 6.6, 100 °C (212 °F) or stainless steel AISI 316, 200 °C (392 °F)
Transducer body	Standard version: Stainless steel AISI 316, 200 °C (392 °F)
Materials of existing pipeline
Steel	Transducer holder: EN 10273 or EN 10216 (P235GH)
	Mounting plates ¹⁾: EN 10273 or EN 10216 (P235GH)
Concrete	Transducer holder: Stainless steel AISI 316 or similar
	Mounting plates ¹⁾: (not included)
Stainless steel	Transducer holder: Stainless steel AISI 316 or similar
	Mounting plates ¹⁾: Stainless steel AISI 316 or similar
Pipe wall thickness
Steel pipe (AISI 316 and St. 37.2 or corresponding material)	Transducer and holder available in length L = 160, allowing a pipe wall thickness up to 20 mm (0.79”)
Concrete pipe	Transducer and holder available in length L = 230, allowing a pipe wall thickness up to 200 mm (7.9”) and pipe sizes ? DN 600.
Dimension of the package box	856 x 390 x 344 mm (33.7“ x 15.4“ x 13.5“)
(L x W x H)	856 x 390 x 344 mm (33.7“ x 15.4“ x 13.5“)
Weight example of a package	approx. 53 kg (116.8 lb)
(standard 2-path with FUS060)	approx. 53 kg (116.8 lb)
Certificates and approvals
Conformity certificate	The devices are supplied as standard with a Siemens Certificate of Conformity on a DVD.
Material certificate	Material certificate for the transducer parts according to EN 10204-3.1 is optionally available.
Approvals	No custody transfer approvals

Information on PED approval:
The SONOKIT includes the pipe mounting parts only and therefore it cannot be PED-approved. After the installation, all installation-related activities (welding, pressure test etc.) are the responsibility of the customer.

¹⁾ Mounting plates are only included for empty pipe installation types (refer to selection "A"). For hot tap mounting the mounting plates are not included (refer to selection "B").

Installation requirements

The space requirements (in mm) around the pipe for retrofitting a SITRANS F US ultrasonic flowmeter type SONOKIT are given below:

Empty pipe installation

Hot-tap installation