2-paths sensor fitted with four SONO 3200 transducers

Error in measurement

Error in measurement at reference conditions

V > 0.5 вЂ¦ 10 m/s, < ± 0.5 % of rate (v = flow velocity)

Max. flow velocity

10 m/s (32 ft)

Nominal size

DN 100 вЂ¦ 600 (4” вЂ¦ 24”)

Media temperature

• Standard

-10 … +200 °C (14 вЂ¦ 392 °F)

• ATEX Ex d version

-20 вЂ¦ +180 °C (-4 вЂ¦ +356 °F)

• ATEX Ex i version

-10 вЂ¦ +190 °C (14 вЂ¦ 374 °F)

• Specials

-200 °C (-328 °F) or up to 250 °C (482 °F)

Ambient temperature

• Standard and Ex-i version

-20 вЂ¦ +60 °C (-4 вЂ¦ +140 °F)

• Ex d version

-20 вЂ¦ +180 °C (-4 вЂ¦ +356 °F)

Enclosure

IP67 (NEMA 4X/6)/IP68 (NEMA 6P) and ATEX (see below)

Process connections

PN designated EN 1092-1, type 11 (B)

Pipe material carbon steel

• DN 200 вЂ¦ DN 600 (8” вЂ¦ 24”), PN 10

• DN 100 вЂ¦ DN 600 (4” вЂ¦ 24”), PN 16

• DN 200 вЂ¦ DN 600 (8” вЂ¦ 24”), PN 25

• DN 100 вЂ¦ DN 500 (4” вЂ¦ 20”), PN 40

Class designated EN 1759-1

Pipe material carbon steel

• DN 100 вЂ¦ DN 600 (4” вЂ¦ 24”) Class 150

• DN 100 вЂ¦ DN 300 (4” вЂ¦ 12”) Class 300

Without flanges (EN 10217), weld-in version
only in carbon steel

• DN 350 вЂ¦ DN 600 (14” вЂ¦ 24”), PN 10

• DN 100 вЂ¦ DN 600 (4” вЂ¦ 24”), PN 16

• DN 200 вЂ¦ DN 600 (8” вЂ¦ 24”), PN 25

• DN 100 вЂ¦ DN 500 (4” вЂ¦ 20”), PN 40

Transducer SONO 3200

O-ring or flange versions

Materials

Pipe

Steel EN 1.0345-P235GH

Flange

PN

EN 10025-S235JRG2, 1E1

Class

ASTM A105,1,1

Transducer body

Stainless steel AISI 316 or similar

Transducer terminal house

Stainless steel AISI 316 or plastic PA 6.6

Certificates and approvals

System ATEX approval for SONO 3100 together with transmitter FUS060-Ex

ATEX II 2 G Ex dem [ia/ib] IIC T6/T4/T3 Gb or

ATEX II 2G Ex d IIC T3-T6 Gb with SONO  3200 Ex d transducers (for standard FUS060 transmitter, installed outside of Ex zone)

For FUS060 Ex version the transducer cable length is restricted to 3 m (9.84 ft), in order to meet requirements for electrical immunity.

Conformity certificate

The devices are supplied as standard with a Siemens Certificate of Conformity on DVD.

Material certificates

Material certificate according to EN 10204-3.1 is optionally available.

NDT examination report

Extended material certificate is optionally available.

Pressure certificate

Pressure test according EN 1024-2.3 optionally available

Calibration report

A standard calibration report is shipped with each flowmeter.

Optionally available:

Extended accredited ISO/IEC 17025 calibration certificates

Approvals

No custody transfer approvals