¹⁾ Length tolerance (mm): DN 100 +2/-3, DN 125 вЂ¦ 200 +3/-4, DN 250 вЂ¦ 400 +4/-5, DN 500 вЂ¦ 600 +5/-6

²⁾ Wall thickness for pressure rates PN 6 вЂ¦ 40. For weld-in sensor versions according EN10217 (flangeless sensors 7ME3100-xxYxx-xxxx, Y=P, Q, R, S ) the tube roundness shall be agreed via the PVR process (only if the factor of Du/Wxx > 100). W_min wall thickness are min. values. The delivered sensor can have larger wall thicknesses to meet the selected pressure rate. Any specific required wall thickness must be ordered as PVR.

³⁾ For all sensors with flange transducers path angle are 60є.

⁴⁾ L is the length of sensor versions without flanges (weld-in version). For weld-in sensor versions according to EN 10217 (flangeless sensors 7ME3100-xxYxx-xxxx, Y = P, Q, R, S) the tube roundness shall be agreed via the PVR process (only if the factor of Du/Wxx > 100).

⁵⁾ B dimension value is an approximate information and may differ a little by flange pressure rate.

^A**) Space required for replacement of transducer min. 230 mm (9.1 inch). For replacement with special tool (extraction tool) see more information on page 3/xx.

Weight of system incl. process flanges and standard O-ring transducers. For sensors with flange transducer please add approx. 10 kg (22.05 lbs). For SS terminal housings instead of the standard PA housing add approx. 5 kg (11.03 lbs).

¹⁾ Length tolerance (mm): 4" +0.08"/-0.12" (+2/-3 mm), 5" вЂ¦ 8" +0.12"/-0.16" (+3/-4mm), 10" вЂ¦ 16" +0.16"/-0.20" (+4/-5 mm), 20" вЂ¦ 24" +0.20"/-0.24" (+5/-6 mm)

²⁾ Minimum wall thickness for pressure rates Class 150 or Class 300. For weld-in sensor versions according to EN 10217 (flangeless sensors 7ME3100-xxYxx-xxxx, Y = P, Q, R, S) the tube roundness shall be agreed via the PVR process (only if the factor of Du/Wxx > 100). W_min wall thickness are min. values. The delivered sensor can have larger wall thicknesses to meet the selected pressure rate. Any specific required wall thickness to be ordered as PVR.

³⁾ For all sensors with flange transducers path angle are 60є.

⁴⁾ L is the length of sensor versions without flanges (weld-in version). For weld-in sensor versions according to EN 10217 (flangeless sensors 7ME3100-xxYxx-xxxx, Y = P, Q, R, S) the tube roundness shall be agreed via the PVR process (only if the factor of Du/Wxx > 100).

⁵⁾ B dimension value is an approximate information and may differ a little by flange pressure rate.

^A**) Space required for replacement of transducer min. 230 mm (9.1 inch). For replacement with special tool (extraction tool) see more information on page 3/xx.

Approximate weights for SONO 3100 sensor with ANSI B16.5 flanges

¹⁾ Weight of system incl. process flanges and standard O-ring transducers. For sensors with flange transducer please add approx. 10 kg (22.05 lbs). For SS terminal housings instead of the standard PA housing add approx. 5 kg (11.03 lb).