Flowmeter SONO 3100/FUS060 . Технические данные. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на Flowmeter SONO 3100/FUS060

| | | | | | | | | |

Flowmeter SONO 3100/FUS060

The transmitter related to this system is the SITRANS FUS060. The technical specifications to the FUS060 see page 4/xx.

2-paths sensor fitted with four SONO 3200 transducers
Error in measurement
Error in measurement at reference conditions	V > 0.5 … 10 m/s, < ± 0.5 % of rate (v = flow velocity)
Max. flow velocity	10 m/s (32 ft)
Nominal size	DN 100 … 600 (4” … 24”)
Media temperature
Standard	-10 … +200 °C (14 … 392 °F)
ATEX Ex d version	-20 … +180 °C (-4 … +356 °F)
ATEX Ex i version	-10 … +190 °C (14 … 374 °F)
Specials	-200 °C (-328 °F) or up to 250 °C (482 °F)
Ambient temperature
Standard and Ex-i version	-20 … +60 °C (-4 … +140 °F)
Ex d version	-20 … +180 °C (-4 … +356 °F)
Enclosure	IP67 (NEMA 4X/6)/IP68 (NEMA 6P) and ATEX (see below)
Process connections
PN designated EN 1092-1, type 11 (B)
Pipe material carbon steel	DN 200 … DN 600 (8” … 24”), PN 10
	DN 100 … DN 600 (4” … 24”), PN 16
	DN 200 … DN 600 (8” … 24”), PN 25
	DN 100 … DN 500 (4” … 20”), PN 40
Class designated EN 1759-1
Pipe material carbon steel	DN 100 … DN 600 (4” … 24”) Class 150
Pipe material carbon steel	DN 100 … DN 300 (4” … 12”) Class 300
Without flanges (EN 10217), weld-in version only in carbon steel	DN 350 … DN 600 (14” … 24”), PN 10
	DN 100 … DN 600 (4” … 24”), PN 16
	DN 200 … DN 600 (8” … 24”), PN 25
	DN 100 … DN 500 (4” … 20”), PN 40
Transducer SONO 3200	O-ring or flange versions
Materials
Pipe	Steel EN 1.0345-P235GH
Flange
PN	EN 10025-S235JRG2, 1E1
Class	ASTM A105,1,1
Transducer body	Stainless steel AISI 316 or similar
Transducer terminal house	Stainless steel AISI 316 or plastic PA 6.6
Certificates and approvals
System ATEX approval for SONO 3100 together with transmitter FUS060-Ex	ATEX II 2 G Ex dem [ia/ib] IIC T6/T4/T3 Gb or
	ATEX II 2G Ex d IIC T3-T6 Gb with SONO 3200 Ex d transducers (for standard FUS060 transmitter, installed outside of Ex zone)
	For FUS060 Ex version the transducer cable length is restricted to 3 m (9.84 ft), in order to meet requirements for electrical immunity.
Conformity certificate	The devices are supplied as standard with a Siemens Certificate of Conformity on DVD.
Material certificates	Material certificate according to EN 10204-3.1 is optionally available.
NDT examination report	Extended material certificate is optionally available.
Pressure certificate	Pressure test according EN 1024-2.3 optionally available
Calibration report	A standard calibration report is shipped with each flowmeter.
	Optionally available:
	Extended accredited ISO/IEC 17025 calibration certificates
Approvals	No custody transfer approvals

The sensor SONO 3100 with transmitter FUS060 conforms to Product Family Standard EN 61326/A3 appendix A
(Title: Electrical Equipment for Measurement control and laboratory use – EMC requirements).

The sensors are approved according to EU directive 2014/68/EU regarding fluid group 1, classified in category III. Design according to EN 13480 (PED Directive).

The SONO 3100 as weld-in version does not include the flanges. Thus, it can neither be tested nor approved according to PED. After the installation, all installation-related activities (welding, pressure test etc.) are the responsibility of the customer.