Order No. supplements
Motor type |
Penultimate position: Voltage code |
Final position: Type of construction code | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
50 Hz |
60 Hz |
Without flange |
With flange |
With standard |
With special flange | ||||||||
230 V?/400 VY |
400 V?/690 VY |
500 VY |
500 V? |
460 VY |
460 V? |
IM B3/6/7/8, IM V6, |
IM B5, IM V1 without protective cover |
IM V1 with protective cover2)3) |
IM B35 |
IM B14, IM V19, IM V18 without protective cover |
IM B34 |
IM B14, IM V19, IM V18 | |
(see “Introduction” for outputs at 60 Hz) |
|||||||||||||
1 |
6 |
3 |
5 |
1 |
6 |
0 |
1 |
4 |
6 |
2 |
7 |
3 | |
1LG4 18 . ? . . . ?? |
O |
O |
O |
O |
O |
O |
? |
?4) |
? |
? |
– |
– |
– |
1LG4 20 . ? . . . ?? |
O |
O |
O |
O |
O |
O |
? |
?4) |
? |
? |
– |
– |
– |
1LG4 22 . ? . . . ?? |
O |
O |
O |
O |
O |
O |
? |
?4) |
? |
? |
– |
– |
– |
1LG4 25 . ? . . . ?? |
O |
O |
O |
O |
O |
O |
? |
?4) |
? |
? |
– |
– |
– |
1LG4 28 . ? . . . ?? |
O |
O |
O |
O |
O |
O |
? |
?4) |
? |
? |
– |
– |
– |
? Standard version
O Without additional charge
? With additional charge
– Not possible
Order other voltages with voltage code9 in the penultimate position and the corresponding order code (see “Special versions” in the “Selection and ordering data” under “Voltages”).
Order other types of construction with type of construction code9 in the final position and the corresponding order code (see “Special versions” in the “Selection and ordering data” under “Types of construction”).
1) If motors 1LG4 188-... to 1LG4 288-... (motor series 1LG4 frame sizes 180 L to 280 M) in types of construction with feet IM B6, IM B7, IM V6 or IM V5 without protective cover are fixed to the wall, it is recommended that the motor feet are supported.
2) 1LG4 220-... to 1LG4 288-... motors (motor series 1LG4 frame sizes 225 M to 280 M) are supplied with two screwed-in eyebolts in accordance with IM B5, whereby one can be relocated in accordance with IM V1 or IM V3. It is important to note that stress must not be applied perpendicular to the ring plane.
3) The “Second shaft extension” option, order codeK16 is not possible.
4) Type of construction IM V3 is only possible using type of construction code9 and order codeM1G.
Приводная техника