Accessories and spare parts

Modular technology

The components of modular technology can be ordered as accessories. The brake, as a safety-related module, must not be retrofitted.

Cables for rotary pulse encoders can be ordered from Catalog DA 65.10.

Mounting of rotary pulse encoder and separately driven fan for 1LA5, 1LA6, 1LA7 and 1LG motors
Version		Frame size	Number of poles	Order No.
Rotary pulse encoder ¹⁾	HTL version	71 ... 225	all	1XP8 001–1
Rotary pulse encoder ¹⁾	TTL version	71 ... 225	all	1XP8 001–2
Separately driven fan incl. mounting parts²⁾		100	all	2CW2 180-8RF54-1AB0
		112	all	2CW2 210-8RF54-1AB1
		132	all	2CW2 250-8RF54-1AB2
		160	all	2CW2 300-8RF54-1AB3
		180	all	2CW2 300-8RF54-1AB4
		200	all	2CW2 300-8RF54-1AB5
		225 ³⁾	all	2CW2 300-8RF54-1AB6
		250	all	1PP9 063-2LA12-ZA11+K50 ⁴⁾
		280	all	1PP9 063-2LA12-ZA11+K50 ⁴⁾
		315	2	1PP9 070-2LA12-ZA11+K50 ⁴⁾
		315	4 to 8	1PP9 063-2LA12-ZA11+K50 ⁴⁾
Separately driven fan and rotary pulse encoder 1XP8 001-1 incl. mounting parts²⁾		100	all	2CW2 180-8RF54-2AB0
		112	all	2CW2 210-8RF54-2AB1
		132	all	2CW2 250-8RF54-2AB2
		160	all	2CW2 300-8RF54-2AB3
		180	all	2CW2 300-8RF54-2AB4
		200	all	2CW2 300-8RF54-2AB5
		225 ³⁾	all	2CW2 300-8RF54-2AB6

¹⁾ For motor series 1LG, the rotary pulse encoders are available on request. They are only available for motor series 1LA7 as accessories for spare parts.

²⁾ The separately driven fan 2CW2 ... comprises a complete fan unit with impeller, the separately driven fan 1PP9 ... only comprises the fan motor without mounting components and impeller.

³⁾ For 1LG motors with separately driven fan with Order No.1PP9 063-2LA12-Z A11+K50 (weight 4.37 kg).

⁴⁾ Only for replacement purposes.

Slide rails with fixing bolts and fixing screws acc. to DIN 42923

Slide rails are used to fix the belt of a machine easily and conveniently when a belt tightener is not available. They are fixed to the base using stone bolts or foundation blocks.

The assignment of slide rails to motor size can be found in DIN 42923. For motors of frame sizes 335 to 450, there are no standardised slide rails (please enquire).

Available from:
Lutgert & Co. GmbH
Postfach 42 51
33276 Gutersloh, Germany
Tel. +49 (0) 5241 - 74 07-0
Fax +49 (0) 5241 - 74 07-90

http://www.luetgert-antriebe.de
e-mail:http://info@luetgert-antriebe.de

Foundation block acc. to DIN 799

The foundation blocks are inserted into the stone foundation and embedded in concrete. They are used for fixing machines of medium size, slide rails, pedestal bearings, baseframes, etc. After the fixing bolts have been unscrewed, the machine can be dragged without having to lift it.

When the machine is initially installed, the foundation block that is bolted to the machine (without washers) and fitted with taper pins is not embedded with concrete until the machine has been fully aligned. In this case, the machine is positioned 2 to 3 mm lower. The difference in shaft height is compensated by inserting shims on final installation. The taper pins safeguard the exact position of the machine when it is repeatedly removed and replaced without the need for realignment.

Available from:
Lutgert & Co. GmbH
Postfach 42 51
33276 Gutersloh, Germany
Tel. +49 (0) 5241 - 74 07-0
Fax +49 (0) 5241 - 74 07-90

http://www.luetgert-antriebe.de
e-mail:http://info@luetgert-antriebe.de

Taper pins acc. to DIN 258 with threaded ends and constant taper lengths

Taper pins are used for components that are repeatedly removed. The drilled hole is ground conical using a conical reamer until the pin can be pushed in by hand until the cone shoulder lies 3 to 4 mm above the rim of the hole.

It can then be driven in using a hammer until it is correctly seated. The pin is removed from the drilled hole by screwing
on the nut and tightening it.

Standardised taper pins are available from general engineering suppliers.

Available from:
Otto Roth GmbH & Co. KG
Rutesheimer Stra?e 22
70499 Stuttgart
Tel. +49 (0) 711-13 88 0
Fax. +49 (0) 711-13 88 233

http://www.ottoroth.de
e-mail:http://info@ottoroth.de

Couplings

The motor from Siemens is connected to the machine or gear unit through a coupling. Flender is an important coupling manufacturer with a wide range of products. For standard applications, Siemens recommends that elastic couplings of Flender types N-Eupex and Rupex or torsionally rigid couplings of types Arpex and Zapex are used. For special applications, Fludex and Elpex couplings are recommended.

Available from:

A. Friedr. Flender AG
Kupplungswerk Mussum
Industriepark Bocholt
Schlavenhorst 100
46395 Bocholt
Tel. +49 (0) 2871-92 2185
Fax +49 (0) 2871-92 2579

http://www.flender.com
e-mail:http://couplings@flender.com

Mounting of encoder

In the case of supply or mounting by the customer.

Options H79, H80

Baumer Hubner GmbH
10967 Berlin
Planufer 92b
Tel. +49 (0) 30-690 03-0
Fax +49 (0) 30-690 03-104

http://www.huebner-berlin.de
e-mail:http://info@huebner-berlin.com

Options H78

Leine & Linde (Deutschland) GmbH
73430 Aalen
Bahnhofstra?e 36
Tel. +49 (0) 7361-78 093-0
Fax +49 (0) 7361-78 093-11

http://www.leinelinde.de
e-mail:http://info@leinelinde.de