| | | | | |
CU230P‑2 HVAC, CU230P‑2 DP and CU230P‑2 PN Control UnitsCU230P‑2 Control Unit with open and closed terminal covers Terminal No. | Signal | Features |
---|
Digital inputs (DI) – Standard | 69 | DI COM | Reference potential for digital inputs | 5 ... 8, 16.17 | DI0 … DI5 | Freely programmable isolated, inputs in compliance with IEC 61131-2 | Digital outputs (DO) | 18 | DO0, NC | Relay output 1 NC contact (5 A, 30 V DC or 2 A, 250 V AC) 1) | 19 | DO0, NO | Relay output 1 NO contact (5 A, 30 V DC or 2 A, 250 V AC) | 20 | DO0, COM | Relay output 1 Common contact (5 A, 30 V DC or 2 A, 250 V AC) 1) | 21 | DO1, NO | Relay output 2 NO contact (0.5 A, 30 V DC) | 22 | DO1, COM | Relay output 2 Common contact (0.5 A, 30 V DC) | 23 | DO2, NC | Relay output 3 NC contact (5 A, 30 V DC or 2 A, 250 V AC) 1) | 24 | DO2, NO | Relay output 3 NO contact (5 A, 30 V DC or 2 A, 250 V AC) | 25 | DO2, COM | Relay output 3 Common contact (5 A, 30 V DC or 2 A, 250 V AC) 1) | Analog inputs (AI) | 3 | AI0+ | Differential input, switchable between current, voltage Value range: 0 ... 10 V, -10 ... +10 V, 0/2 ... 10 V, 0/4 ... 20 mA | 4 | AI0- | 10 | AI1+ | Differential input, switchable between current, voltage Value range: 0 ... 10 V, -10 ... +10 V, 0/2 ... 10 V, 0/4 ... 20 mA | 11 | AI1- | 50 | AI2+ | Non-isolated input, switchable between current and temperature sensors, type Pt1000/LG-Ni1000 Value range: 0/4 ... 20 mA, Pt1000 -50 ... +250 °C; LG‑Ni1000 -50 ... +150 °C | 51 | GND | Reference potential of the AI2/internal electronics ground | 52 | AI3+ | Non-isolated input for temperature sensors, type Pt1000/LG‑Ni1000 Value range: Pt1000: -50 ... +250 °C; LG‑Ni1000: -50 ... +150 °C | 53 | GND | Reference potential of the AI3/internal electronics ground | Analog outputs (AO) | 12 | AO0+ | Non-isolated output Freely programmable Value range: 0 ... 10 V; 0/4 ... 20 mA | 13 | GND | Reference potential of the AO0/internal electronics ground | 26 | AO1+ | Non-isolated output Freely programmable Value range: 0 ... 10 V; 0/4 ... 20 mA | 27 | GND | Reference potential of the AO1/internal electronics ground | PTC/KTY interface | 14 | T1 MOTOR | Positive input for motor temperature sensor Type: PTC, KTY, bimetal | 15 | T2 MOTOR | Negative input for motor temperature sensor | Power supply | 9 | +24 V OUT | Power supply output 24 V DC, max. 100 mA | 28 | GND | Reference potential of the power supply/internal electronics ground | 1 | +10 V OUT | Power supply output 10 V DC ±0.5 V, max. 10 mA | 2 | GND | Reference potential of the power supply/internal electronics ground | 31 | +24 V IN | Power supply input 20.4 ... 28.8 V DC, max. 1500 mA | 32 | GND IN | Reference potential of the power supply input | 35 | +10 V OUT | Power supply output 10 V DC ±0.5 V, max. 10 mA | 36 | GND | Reference potential of the power supply/internal electronics ground |
1) The following applies to systems complying with UL: A maximum of 3 A, 30 V DC or 2 A, 250 V AC may be connected via terminals 18 / 20 (DO0 NC) and 23 / 25 (DO2 NC). CU240E‑2, CU240E‑2 DP, CU240E‑2 PN, CU240E‑2 F, CU240E‑2 DP‑F and CU240E‑2 PN‑F Control UnitsCU240E‑2 Control Unit with open and closed terminal covers Terminal No. | Signal | Features |
---|
Digital inputs (DI) – Standard | 5 ... 8, 16.17 | DI0 … DI5 | Freely programmable (isolated) 5.5 mA/24 V | 69 | DI COM1 | Reference potential for digital inputs 0, 2, 4, 6 | 34 | DI COM2 | Reference potential for digital inputs 1, 3, 5, 7 | Digital inputs (DI) – Fail-safe (formed from two standard inputs using the appropriate parameter setting) | 16, 17 | F-DI0 | Fail-safe digital inputs, 2 channels (redundant), freely programmable (isolated) 5.5 mA/24 V | The following are only available for CU240E‑2 F, CU240E‑2 DP‑F and CU240E‑2 PN‑F | 5, 6 | F-DI0 | Fail-safe digital inputs, 2 channels (redundant), freely programmable (isolated) 5.5 mA/24 V | 7, 8 | F-DI1 | Fail-safe digital inputs, 2 channels (redundant), freely programmable (isolated) 5.5 mA/24 V | 16, 17 | F-DI2 | Fail-safe digital inputs, 2 channels (redundant), freely programmable (isolated) 5.5 mA/24 V | Digital outputs (DO) | 18 | DO0, NC | Relay output DO0 NC contact (0.5 A, 30 V DC) | 19 | DO0, NO | Relay output DO0 NO contact (0.5 A, 30 V DC) | 20 | DO0, COM | Relay output DO0 Common contact (0.5 A, 30 V DC) | 21 | DO1+ | Transistor output DO1 Positive (0.5 A, 30 V DC) | 22 | DO1- | Transistor output DO1 Negative (0.5 A, 30 V DC) | 23 | DO2, NC | Relay output DO2 NC contact (0.5 A, 30 V DC) | 24 | DO2, NO | Relay output DO2 NO contact (0.5 A, 30 V DC) | 25 | DO2, COM | Relay output DO2 Common contact (0.5 A, 30 V DC) | Analog inputs (AI) | 3 | AI0+ | Differential input, switchable between current, voltage Value range: 0 ... 10 V, -10 ... +10 V, 0/2 ... 10 V, 0/4 ... 20 mA | 4 | AI0- | 10 | AI1+ | Differential input, switchable between current, voltage Value range: 0 ... 10 V, -10 ... +10 V, 0/2 ... 10 V, 0/4 ... 20 mA | 11 | AI1- | Analog outputs (AO) | 12 | AO0+ | Non-isolated output Freely programmable Value range: 0 ... 10 V; 0/4 ... 20 mA | 13 | GND | Reference potential of the AO0/internal electronics ground | 26 | AO1+ | Non-isolated output Freely programmable Value range: 0 ... 10 V; 0/4 ... 20 mA | 27 | GND | Reference potential of the AO1/internal electronics ground | PTC/KTY interface | 14 | T1 MOTOR | Positive input for motor temperature sensor Type: PTC, KTY, bimetal | 15 | T2 MOTOR | Negative input for motor temperature sensor | Power supply | 9 | +24 V OUT | Power supply output 24 V DC, max. 100 mA | 28 | GND | Reference potential of the power supply/internal electronics ground | 1 | +10 V OUT | Power supply output 10 V DC ±0.5 V, max. 10 mA | 2 | GND | Reference potential of the power supply/internal electronics ground | 31 | +24 V IN | Power supply input 20.4 ... 28.8 V DC, max. 1500 mA | 32 | GND IN | Reference potential of the power supply input |
CU250S‑2, CU250S‑2 DP, CU250S‑2 PN, CU250S‑2 CAN Control UnitsCU250S-2 Control Unit with open and closed terminal covers Terminal No. | Signal | Features |
---|
Digital inputs (DI) | 5 | DI0 | Digital inputs, floating, 5.5 mA/24 V | 6 | DI1+ | Digital inputs, floating, 5.5 mA/24 V | 64 | DI1- | Digital inputs, floating, 5.5 mA/24 V | 7 | DI2 | Digital inputs, floating, 5.5 mA/24 V | 8 | DI3+ | Digital inputs, floating, 5.5 mA/24 V | 65 | DI3- | Digital inputs, floating, 5.5 mA/24 V | 16 | DI4 | Digital inputs, floating, 5.5 mA/24 V | 17 | DI5+ | Digital inputs, floating, 5.5 mA/24 V | 66 | DI5- | Digital inputs, floating, 5.5 mA/24 V | 67 | DI6 | Digital inputs, floating, 5.5 mA/24 V | 69 | DI COM1 | Reference potential for digital inputs DI0, DI2, DI4, DI6 | Digital inputs (DI) | 41 ... 44 | DI16 ... DI19 | Freely programmable (isolated) 5.5 mA/24 V | 40 | DI COM3 | Reference potential for digital inputs DI16 ... DI19 | Digital inputs (DI) – Fail-safe (formed from two standard inputs using the appropriate parameter setting) | 5, 6 | F-DI0 | Fail-safe digital inputs, 2 channels (redundant), freely programmable (isolated) 5.5 mA/24 V | 7, 8 | F-DI1 | Fail-safe digital inputs, 2 channels (redundant), freely programmable (isolated) 5.5 mA/24 V | 16, 17 | F-DI2 | Fail-safe digital inputs, 2 channels (redundant), freely programmable (isolated) 5.5 mA/24 V | 69 | DI COM1 | Reference potential for digital inputs F-DI0, F-DI1, F-DI2 | Switchable digital inputs or outputs (digital inputs DI24 to DI27can also be used as a pulse input with a maximum frequency of 32 kHz) | 51 | DI24/DO24 | Freely programmable (non-floating), DI: 5.5 mA/24 V, DO: 100 mA/24 V | 53 | DI25/DO25 | Freely programmable (non-floating), DI: 5.5 mA/24 V, DO: 100 mA/24 V | 53 | DI26/DO26 | Freely programmable (non-floating), DI: 5.5 mA/24 V, DO: 100 mA/24 V | 54 | DI27/DO27 | Freely programmable (non-floating), DI: 5.5 mA/24 V, DO: 100 mA/24 V | 50 | GND | Reference potential | Digital outputs (DO) – Fail-safe | 18 | DO0, NC | Relay output DO0 NC contact (0.5 A, 30 V DC) | 19 | DO0, NO | Relay output DO0 NO contact (0.5 A, 30 V DC) | 20 | DO0, COM | Relay output DO0 Common contact (0.5 A, 30 V DC) | 21 | DO1 NO | Transistor output DO1 Positive (0.5 A, 30 V DC) | 22 | DO1 COM | Transistor output DO1 Negative (0.5 A, 30 V DC) | 23 | DO2, NC | Relay output DO2 NC contact (0.5 A, 30 V DC) | 24 | DO2, NO | Relay output DO2 NO contact (0.5 A, 30 V DC) | 25 | DO2, COM | Relay output DO2 Common contact (0.5 A, 30 V DC) | Analog inputs (AI) | 3 | AI0+ | Differential input, switchable between current, voltage Value range: 0 ... 10 V, -10 ... +10 V, 0/2 ... 10 V, 0/4 ... 20 mA | 4 | AI0- | 10 | AI1+ | Differential input, switchable between current, voltage Value range: 0 ... 10 V, -10 ... +10 V, 0/2 ... 10 V, 0/4 ... 20 mA | 11 | AI1- | 13 | GND | Reference potential of AI | Analog outputs (AO) | 12 | AO0+ | Non-isolated output Freely programmable Value range: 0 ... 10 V; 0/4 ... 20 mA | 26 | AO1+ | Non-isolated output Freely programmable Value range: 0 ... 10 V; 0/4 ... 20 mA | 27 | GND | Reference potential of AO | PTC/KTY interface | 14 | T1 MOTOR | Positive input for motor temperature sensor Type: PTC, KTY, bimetal | 15 | T2 MOTOR | Negative input for motor temperature sensor | Power supply | 9 | +24 V OUT | Power supply output 24 V DC, max. 200 mA | 28 | GND | Reference potential of the power supply/internal electronics ground | 1 | +10 V OUT | Power supply output 10 V DC ±0.5 V, max. 10 mA | 2 | GND | Reference potential of the power supply/internal electronics ground | 31 | +24 V IN | Power supply input 20.4 ... 28.8 V DC, max. 1500 mA | 32 | GND IN | Reference potential of the power supply input | HTL encoder/resolver interface via terminal | 33 | ENC+ | HTL encoder power supply | 79 | GND | Reference potential | 70 | AP/S2 | HTL track A+ / resolver signal A (sin+) | 71 | AN/S4 | HTL track A- / inverted resolver signal A (sin-) | 72 | BP/S1 | HTL track B+ / resolver signal S1 | 73 | BN/S3 | HTL track B- / inverted resolver signal B (cos-) | 74 | ZP | HTL zero signal+ | 75 | ZN | HTL zero signal- | 76 | R1 | Resolver excitation+ | 77 | R2 | Resolver excitation- | DRIVE-CLiQ | 1 | Transmit data + | 2 | Transmit data - | 3 | Receive data + | 4 | – | 5 | – | 6 | Receive data - | 7 | – | 8 | – | A | +24 V power supply | B | M, reference for power supply |
HTL, TTL, SSI, temperature via SUB-D interface |
---|
Terminal No. | Signal | HTL | TTL | SSI (RS422 standard) | KTY84, PTC, bimetal |
---|
1 | Motor temperature sensing + | – | – | – | Temp + | 2 | SSI clock | – | – | Clock + | – | 3 | Inverse SSI clock | – | – | Clock - | – | 4 | 5 V/24 V encoder supply | P encoder | P encoder | P encoder | – | 5 | 5 V/24 V encoder supply | P encoder | P encoder | P encoder | – | 6 | Sense input, encoder supply | – | P sense | – | – | 7 | 0 V, reference for encoder supply | M encoder | M encoder | M encoder | – | 8 | Motor temperature sensing - | – | – | – | Temp- | 9 | 0 V, reference for sense input | – | M sense | – | – | 10 | Referencing signal | R + | R + | – | – | 11 | Inverted referencing signal | R - | R - | – | – | 12 | Inverted incremental signal B | B - | B - | – | – | 13 | Incremental signal B | B + | B + | – | – | 14 | Inverted incremental signal A / SSI data | A - | A - | Data - | – | 15 | Incremental signal A / SSI data | A + | A + | Data + | – |
|
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Àðìàòóðà DENDOR
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Äàò÷èêè è èçìåðèòåëè
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ðåãóëÿòîðû è ðåãèñòðàòîðû
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ïíåâìàòè÷åñêîå îáîðóäîâàíèå
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Êðàíû è Êëàïàíû
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Èçìåðèòåëüíûå ïðèáîðû
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ñèñòåìû áåñïðîâîäíîãî óïðàâëåíèÿ «óìíûé äîì»
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Áåñêîíòàêòíûå âûêëþ÷àòåëè Êîíå÷íûå âûêëþ÷àòåëè Îïòè÷åñêèå äàò÷èêè Ýíêîäåðû
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Óñòàíîâêà óìÿã÷åíèÿ
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Óñòàíîâêà îáåçæåëåçèâàíèÿ
|