|
| |
Runtime licenses for SIMOTION C and DFor SIMOTION C and D, licenses for runtime software can be ordered individually or as pre-installed software (by order code/Z option) on memory card. In both cases, the license certificate is enclosed. Runtime licenses for SIMOTION PLicenses for runtime software can be ordered individually or by means of order code (Z option) for SIMOTION P320-4. When ordered by means of order code (Z option), the runtime licenses are not pre-installed, the license certificate is enclosed. Ordering individual licensesThe article numbers can be found in column "Single-user license" in the ordering data table. If several licenses of the same type are needed, e.g.
3 × POS license, the article number must be repeated for each license. Example: A 1 GB CompactFlash card for SIMOTION D4x5-2 has been purchased, but without pre-installed runtime licenses. During the configuring process with SIMOTION SCOUT, a message is displayed to indicate that the following runtime licenses are needed: 1 × POS axis license, 1 × TControl license. The ordering data table specifies the following: - POS axis license: 6AU1820-1AA20-0AB0
- TControl license: 6AU1820-2AA20-0AB0
The required software options are assigned to hardware (memory cards or SIMOTION P) by generating a license key over the Internet at.
Homepage: http://www.siemens.com/automation/license Ordering pre-installed licensesTo order pre-installed licenses on memory card, the type and number of required licenses must be specified in the order using order codes (Z options). These order codes are added to the article number for the SIMOTION memory card. Step 1: The article number of the SIMOTION memory card must be stated first: - Memory card for SIMOTION C:
Micro memory card 64 MB: 6AU1720-1KA00-0AA0 - Memory card for SIMOTION D410-2:
CompactFlash card 1 GB: 6AU1400-1PA23-0AA0 - Memory card for SIMOTION D4x5-2:
CompactFlash card 1 GB: 6AU1400-2PA23-0AA0
Step 2: The following order codes must be stated in order to specify the type and quantity of required runtime licenses: Each order code begins with the characters "-Z" and is listed in the column headed "Order codes for pre-installed licenses" in the ordering data table. Example 1: 64 MB micro memory card for SIMOTION C240 with - MultiAxes Package license for SIMOTION C2xx:
Article No.: 6AU1720-1KA00-0AA0 -Z M24 Example 2: 1 GB CompactFlash card for SIMOTION D4x5-2 with - 3 POS licenses
- 2 CAM licenses
- 1 TControl license and
- 1 SINAMICS Safety Integrated Extended Functions license:
Article No.: 6AU1400-2PA23-0AA0 -Z P03 + C02 + T01 + F01 Configurator for runtime licensesAn electronic ordering configurator is available in the Industry Mall for ordering SIMOTION hardware with corresponding runtime licenses. Homepage: http://www.siemens.com/industrymall This will guide you step by step through the process of selecting and ordering SIMOTION hardware with pre-installed runtime licenses. Selection and ordering dataLizense type | Single-user license Article No. | Order codes for pre-installed licenses on SIMOTION memory cards | Licensed functions | License
object | Information |
|---|
Axis licenses | | 6AU1820-1AA20-0AB0 | Pxx – POS license and quantity
(e.g. P02 = 2 POS licenses) | Positioning | Per axis | In the case of D410-2, required only for 2 axes or more | | 6AU1820-1AB20-0AB0 | Gxx – GEAR license and quantity
(e.g. G03 = 3 GEAR licenses) | Positioning, synchronous operation, path interpolation | | | 6AU1820-1AC20-0AB0 | Cxx – CAM license and quantity
(e.g. C01 = 1 CAM license) | Positioning, synchronous operation, path interpolation, cam (all functions of the Motion Control technology package) | | MultiAxes Packages | | 6AU1820-0AA20-0AB0 | M00 – MultiAxes Package license (platform-independent) | Positioning, synchronous operation, path interpolation, cam (all functions of the Motion Control technology package) | Unlimited axes on one controller | | | 6AU1820-0AA24-0AB0 | M24 – MultiAxes Package license for C2xx | | 6AU1820-0AA32-0AB0 | M32 – MultiAxes Package license for P320 | | 6AU1820-0AA41-0AB0 | M41 – MultiAxes Package license for D410-2 | | 6AU1820-0AA42-0AB0 | M42 – MultiAxes Package license for D425-x | - For D435-x (incl. D425-x)
| 6AU1820-0AA43-0AB0 | M43 – MultiAxes Package license for D435-x | - For D445-x/D455-x (incl. D435-x and D425-x)
| 6AU1820-0AA44-0AB0 | M44 – MultiAxes Package license for D445-x/D455-x | MultiAxes and Safety Packages | | 6AU1820-0AS42-0AB0 | S42 – MultiAxes license and Safety Package for D425-x | Positioning, synchronous operation, path interpolation, cam (all functions of the Motion Control technology package) plus SINAMICS Safety Integrated Extended Functions for SIMOTION D | Unlimited axes (incl. SINAMICS Safetyï€ Integrated Extended Functions) on one controller | SINAMICS Safety Integrated Extended Functions for integrated SINAMICS drives with SIMOTION D and CX32-2 Controller Extension | - For D435-x (incl. D425-x)
| 6AU1820-0AS43-0AB0 | S43 – MultiAxes license and Safety Package for D435-x | - For D445-x/D455-x (incl. D435-x and D425-x)
| 6AU1820-0AS44-0AB0 | S44 – MultiAxes license and Safety Package for D445-x/D455-x | Licenses for other technology packages / technology functions | | 6AU1820-2AA20-0AB0 | Txx – TControl license and quantity
(e.g. T03 = 3 TControl licenses) | Temperature control | 8 temperature channels per license | | - MIIF (Multipurpose Information Interface)
| 6AU1820-3DA20-0AB0 | B02 – MIIF license | Multipurpose Information Interface | Per controller | On one C2xx, P3xx or D4xx-2 | - VIBX (Vibration Extinction)
| 6AU1820-3CA20-0AB0 | B03 – VIBX license | Vibration damping of axes | Per controllerr | On one C2xx, P3xx or D4xx-2 | - OACAMGEN (cam generation)
| 6AU1820-3EA20-0AB0 | B04 – OACAMGEN license | Motion profiles for servo presses | Per controller | On one C2xx, P3xx or D4xx-2 | | 6AU1820-2AF20-0AB0 | Fxx – Safety license and quantity
(e.g. F02 = 2 Safety Integrated Extended Functions licenses) | SINAMICS Safetyï€ Integrated Extended Functions for SIMOTION D | Per safety axis with Safetyï€ Integrated Extended Functions | For integrated SINAMICS drives with SIMOTION D and CX32-2 Controller Extension | | 6AU1820-2AH20-0AB0 | H00 – High output frequency license | SINAMICS high output frequency | Per controller | High output frequency for integrated SINAMICS drives with SIMOTION D and CX32-2 Controller Extension | Licenses for SIMOTION IT communication functions | | 6AU1820-8BA20-0AB0 | D00 – IT DIAG license | Integrated web server | Per controller | On platforms with Ethernet and/or PROFINET interface | - SIMOTION IT OPC XML-DA 1)
| 6AU1820-8BB20-0AB0 | X00 – IT OPC XML-DA license | Communication via OPC XML-DA | Per controller | | - SIMOTION IT Virtual Machine
| 6AU1820-8BD20-0AB0 | J00 – SIMOTION IT Virtual M license achine | For SIMOTION Kernel versions earlier than V4.2, usable as combined license for SIMOTION IT DIAG, OPC XML-DA and Virtual Machine. | Per controller | |
1) Subject to license for SIMOTION Kernel versions earlier than V4.2
|
