Converter Cabinet Units . Технические данные. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на Converter Cabinet Units

| | | | | | | |

The most important directives and standards are listed below. These are used as basis for the SINAMICS S150 converter cabinet units and they must be carefully observed to achieve an EMC-compliant configuration that is safe both functionally and in operation.

European directives
2014/30/EU	EMC Directive: Directive of the European Parliament and Council of February 26, 2014, on the harmonization of the laws of the member states relating to electromagnetic compatibility (recast)
2006/42/EC	Machinery Directive: Directive of the European Parliament and Council of May 17, 2006, on machinery and amending Directive 95/16/EC (recast).
European standards
EN ISO 3744	Acoustics – Determination of the sound power level and sound energy level for noise sources that result from sound pressure measurements – envelope surface procedure of the accuracy class 2 for a largely free sound field over a reflecting plane
EN ISO 13849вЂ‘1	Safety of machinery – safety-related parts of control systems; Part 1: General principles for design (ISO 13849-1: 2006)
EN 60146вЂ‘1вЂ‘1	Semiconductor converters – General requirements and line-commutated converters Part 1вЂ‘1: Specification of basic requirements
EN 60204вЂ‘1	Safety of machinery – Electrical equipment of machines; Part 1: General requirements
EN 60529	Degrees of protection provided by enclosures (IP Code)
EN 61508вЂ‘1	Functional safety of electrical/electronic/programmable electronic safety-related systems Part 1: General requirements
EN 61800вЂ‘2	Adjustable speed electrical power drive systems Part 2: General requirements; rating specifications for low voltage adjustable frequency AC power drive systems
EN 61800вЂ‘3	Adjustable speed electrical power drive systems Part 3: EMC requirements and specific test methods
EN 61800вЂ‘5вЂ‘1	Adjustable speed electrical power drive systems Part 5: Safety requirements Main section 1: Electrical and thermal requirements
EN 61800вЂ‘5вЂ‘2	Adjustable speed electrical power drive systems Part 5-2: Safety requirements – Functional safety (IEC 61800вЂ‘5вЂ‘2: 2007)

General technical specifications

Electrical specifications
Line voltages	380 вЂ¦ 480 V 3 AC, ±10 % (-15 % <1 min) 500 вЂ¦ 690 V 3 AC, ±10 % (-15 % <1 min)
Line supply types	Grounded TN/TT systems and non-grounded IT systems
Line frequency	47 ... 63 Hz
Output frequency ¹⁾	0 ... 550 Hz
Line power factor	Adjustable (factory-set to cos П† = 1)
Efficiency	>96 %
Overvoltage category	III to EN 61800вЂ‘5вЂ‘1
Control method	Vector control with and without encoder or V/f control
Fixed speeds	15 fixed speeds plus 1 minimum speed, parameterizable (in the default setting, 3 fixed setpoints plus 1 minimum speed are selectable using terminal block/PROFIBUS/PROFINET)
Skippable speed ranges	4, parameterizable
Setpoint resolution	0.001 rpm digital (14 bits + sign) 12 bits analog
Braking operation	Four-quadrant operation is possible as standard (optional via a braking unit if braking is required when power fails)
Mechanical specifications
Degree of protection	IP20 (higher degrees of protection up to IP54 optional)
Protection class	I acc. to EN 61800вЂ‘5вЂ‘1
Touch protection	EN 50274/DGUV regulation 3 when used as intended
Cabinet system	Rittal TS 8, doors with double-bit key, three-section base plates for cable entry
Paint finish	RAL 7035 (indoor requirements)
Cooling method	Forced air cooling AF according to EN 60146
Ambient conditions	Storage ²⁾	Transport ²⁾	Operation
Ambient temperature	-25 ... +55 °C	-25 ... +70 °C from -40 °C for 24 hours	0 ... 40 °C to +50 °C, see derating data
Relative humidity (condensation not permissible)	5 ... 95% Class 1K4 acc. to IEC 60721вЂ‘3вЂ‘1	5 ... 95 % at 40 °C Class 2K3 acc. to IEC 60721вЂ‘3вЂ‘2	5 ... 95 % Class 3K3 acc. to IEC 60721вЂ‘3вЂ‘3
Environmental class/harmful chemical substances	Class 1C2 acc. to IEC 60721вЂ‘3вЂ‘1	Class 2C2 acc. to IEC 60721вЂ‘3вЂ‘2	Class 3C2 acc. to IEC 60721вЂ‘3вЂ‘3
Organic/biological influences	Class 1B1 acc. to IEC 60721вЂ‘3вЂ‘1	Class 2B1 acc. to IEC 60721вЂ‘3вЂ‘2	Class 3B1 acc. to IEC 60721вЂ‘3вЂ‘3
Degree of pollution	2 acc. to EN 61800вЂ‘5вЂ‘1
Installation altitude	Up to 2000 m above sea level without derating; > 2000 m see derating data
Mechanical stability	Storage ²⁾	Transport ²⁾	Operation
Vibratory load	Class 1M2 acc. to IEC 60721вЂ‘3вЂ‘1	Class 2M2 acc. to IEC 60721вЂ‘3вЂ‘2	–
Deflection	1.5 mm at 5 ... 9 Hz	3.1 mm at 5 ... 9 Hz	0.075 mm at 10 ... 58 Hz
Acceleration	5 m/sІ at >9 ... 200 Hz	10 m/sІ at 9 ... 200 Hz	9.8 m/s² at 58 ... 200 Hz
Shock load	Class 1M2 acc. to IEC 60721вЂ‘3вЂ‘1	Class 2M2 acc. to IEC 60721вЂ‘3вЂ‘2	Class 3M4 acc. to IEC 60721вЂ‘3вЂ‘3
Acceleration	40 m/sІ at 22 ms	100 m/sІ at 11 ms	100 m/s² at 11 ms
Compliance with standards
Certificates of suitability, according to	CE (EMC Directive 2014/30/EU and Machinery Directive 2006/42/EC for functional safety) RCM
Radio interference suppression	SINAMICS drive converter systems are not designed for connection to the public grid (first environment). Radio interference suppression is compliant with the EMC product standard for variable-speed drives EN 61800вЂ‘3, "Second environment" (industrial networks). EMC disturbances can occur when connected to the public grid. However, if additional measures are taken (e.g. в†’ line filter), it can also be operated in the "first environment".

¹⁾ Please note:

- The correlation between the maximum output frequency, pulse frequency and current derating. Higher output frequencies on request.

- The correlation between the maximum output frequency and permissible output current (current derating).

Information is provided in the SINAMICS Low Voltage Engineering Manual.

²⁾ In transport packaging.

Deviations from the specified classes are underlined.

Line voltage 380 ... 480 V 3 AC		SINAMICS S150 converter cabinet units
		6SL3710-7LE32-1AA3	6SL3710-7LE32-6AA3	6SL3710-7LE33-1AA3	6SL3710-7LE33-8AA3	6SL3710-7LE35-0AA3	6SL3710-7LE36-1AA3
Type rating
At I_L (50 Hz 400 V) ¹⁾	kW	110	132	160	200	250	315
At I_H (50 Hz 400 V) ¹⁾	kW	90	110	132	160	200	250
At I_L (60 Hz 460 V) ²⁾	hp	150	200	250	300	400	500
At I_H (60 Hz 460 V) ²⁾	hp	150	200	200	250	350	350
Output current
Rated current I_rated O	A	210	260	310	380	490	605
Base-load current I_L³⁾	A	205	250	302	370	477	590
Base-load current I_H⁴⁾	A	178	233	277	340	438	460
Maximum current I_max O	A	307	375	453	555	715	885
Infeed/regenerative feedback current
Rated input current I_rated I	A	197	242	286	349	447	549
Maximum input current I_max I	A	315	390	570	570	735	907
Current demand, max. ⁵⁾
24 V DC aux. power supply	A	Internal	Internal	Internal	Internal	Internal	Internal
Pulse frequency ⁶⁾
Rated frequency	kHz	2	2	2	2	2	1.25
Pulse frequency, max.
Without current derating	kHz	2	2	2	2	2	1.25
With current derating	kHz	8	8	8	8	8	7.5
Power loss, max. ⁷⁾
At 50 Hz 400 V	kW	6.31	7.55	10.01	10.72	13.13	17.69
At 60 Hz 460 V	kW	6.49	7.85	10.45	11.15	13.65	18.55
Cooling air requirement	m³/s	0.58	0.7	1.19	1.19	1.19	1.96
Sound pressure level L_pA (1 m) at 50/60 Hz	dB	71/73	71/73	72/74	72/74	72/74	77/79
Cable length, max.
Shielded	m	300	300	300	300	300	300
Unshielded	m	450	450	450	450	450	450
Degree of protection		IP20	IP20	IP20	IP20	IP20	IP20
Dimensions
Width	mm	1400	1400	1600	1800	1800	2200
Height	mm	2000	2000	2000	2000	2000	2000
Depth	mm	600	600	600	600	600	600
Weight (without options), approx.	kg	708	708	892	980	980	1716
Short-circuit current rating according to IEC ⁸⁾	kA	65	65	65	65	65	65
Minimum short-circuit current⁹⁾	A	3000	3000	4500	4500	8000	12000
Frame sizes
Active Interface Module		FI	FI	GI	GI	GI	HI
Active Line Module		FX	FX	GX	GX	GX	HX
Motor Module		FX	FX	GX	GX	GX	HX

¹⁾ Rated output of a typical 6-pole standard induction motor based on I_L or I_H for 400 V 3 AC 50 Hz.

²⁾ Rated output of a typical 6-pole standard induction motor based on I_L or I_H for 460 V 3 AC 60 Hz.

³⁾ The base-load current I_L is based on a duty cycle of 110 % for 60 s or 150 % for 10 s with a duty cycle duration of 300 s.

⁴⁾ The base-load current I_H is based on a duty cycle of 150 % for 60 s or 160 % for 10 s with a duty cycle duration of 300 s.

⁵⁾ If the drive closed-loop control is still to remain active when the line supply fails, the equipment must be provided with an external 24 V DC supply.

⁶⁾Information regarding the correlation between the pulse frequency and max. output current/output frequency is provided in the SINAMICS Low Voltage Engineering Manual.

⁷⁾ The specified power losses are the maximum values at 100 % utilization. The values are lower under normal operating conditions.

⁸⁾ In conjunction with the specified fuses or circuit breakers.

⁹⁾ Current required for reliably triggering protective devices.

Note:

The power data in hp units is based on the NEC/CEC standards for the North American market.

Information about line supply connections, motor connections and cabinet grounding can be found under Cable cross-sections and connections.

Line voltage 380 ... 480 V 3 AC		SINAMICS S150 converter cabinet units
		6SL3710-7LE37-5AA3	6SL3710-7LE38-4AA3	6SL3710-7LE41-0AA3	6SL3710-7LE41-2AA3	6SL3710-7LE41-4AA3
Type rating
At I_L (50 Hz 400 V) ¹⁾	kW	400	450	560	710	800
At I_H (50 Hz 400 V) ¹⁾	kW	315	400	450	560	710
At I_L (60 Hz 460 V) ²⁾	hp	600	700	800	900	1150
At I_H (60 Hz 460 V) ²⁾	hp	450	600	700	900	1000
Output current
Rated current I_rated O	A	745	840	985	1260	1405
Base-load current I_L³⁾	A	725	820	960	1230	1370
Base-load current I_H⁴⁾	A	570	700	860	1127	1257
Maximum current I_max O	A	1087	1230	1440	1845	2055
Infeed/regenerative feedback current
Rated input current I_rated I	A	674	759	888	1133	1262
Maximum input current I_max I	A	1118	1260	1477	1891	2107
Current demand, max. ⁵⁾
24 V DC aux. power supply	A	Internal	Internal	Internal	Internal	Internal
Pulse frequency ⁶⁾
Rated frequency	kHz	1.25	1.25	1.25	1.25	1.25
Pulse frequency, max.
Without current derating	kHz	1.25	1.25	1.25	1.25	1.25
With current derating	kHz	7.5	7.5	7.5	7.5	7.5
Power loss, max. ⁷⁾
At 50 Hz 400 V	kW	20.63	21.1	27.25	33.05	33.95
At 60 Hz 460 V	kW	21.75	22.25	28.65	34.85	35.85
Cooling air requirement	m³/s	1.96	1.96	2.6	2.6	2.6
Sound pressure level L_pA (1 m) at 50/60 Hz	dB	77/79	77/79	77/79	78/80	78/80
Cable length, max.
Shielded	m	300	300	300	300	300
Unshielded	m	450	450	450	450	450
Degree of protection		IP20	IP20	IP20	IP20	IP20
Dimensions
Width	mm	2200	2200	2800	2800	2800
Height	mm	2000	2000	2000	2000	2000
Depth	mm	600	600	600	600	600
Weight (without options), approx.	kg	1731	1778	2408	2408	2408
Short-circuit current rating according to IEC ⁸⁾	kA	65	65	84	100	100
Minimum short-circuit current⁹⁾	A	15000	2000	2500	3200	3200
Frame sizes
Active Interface Module		HI	HI	JI	JI	JI
Active Line Module		HX	HX	JX	JX	JX
Motor Module		HX	HX	JX	JX	JX