• 19" rack unit with 4 HU for installation
  • In hinged frame
  • In cabinets with or without telescope rails
• Front plate can be swung down for servicing purposes (laptop connection)
• Connections for sample gas
  • Input: Clamping ring connection for a pipe diameter of 6 mm or ј"
  • Output: Pipe connection with diameter 6 mm or ј"
• High-pressure and low-pressure versions
• Catalytically active and inactive cell

Display and control panel

• Large LCD field for simultaneous display of
  • Measured value
  • Status bar
  • Measuring ranges
• Contrast of the LCD field adjustable via the menu
• Permanent LED backlighting
• Washable membrane keyboard with five softkeys
• Five-digit measured-value display
  (decimal point counts as one digit)
• Menu-driven operation for parameterization, configuration, test functions, adjustment
• User help in plain text
• Graphic display of concentration trend; programmable time intervals
• Bilingual operating software German/English, English/Spanish, French/English, Spanish/English, Italian/English
• Switchover from ppm/vpm measuring range to % measuring range

Input and outputs

• One analog output per medium (from 0, 2, 4 to 20 mA; NAMUR parameterizable)
• Six digital inputs freely configurable (e.g. for measurement range switchover, processing of external signals from sample preparation)
• Six relay outputs freely configurable (failure, maintenance demanded, maintenance switch, threshold alarm, external magnetic valves)
• Two analog inputs configurable (e.g. correction of cross-interference, external pressure sensor)
• Expansion by eight additional digital inputs and eight additional relay outputs for autocalibration with up to four calibration gases

Communication

RS 485 present in basic unit (connection from the rear).

Options

• RS 485/RS 232 converter
• RS 485/Ethernet converter
• RS 485/USB converter
• Connection to networks via PROFIBUS DP/PA interface
• SIPROM GA software as the service and maintenance tool

OXYMAT 64, membrane keyboard and graphic display

Designs – Parts wetted by sample gas, standard

Gas path (high-pressure version)

Gas path OXYMAT 64, high-pressure version

The sample gas pressure (2 000 to 6 000 hPa) is regulated by the pressure regulator (3) at approx. 2 000 hPa or is provided by the operator with 2 000 hPa. This pressure is applied at the restrictor (10). The restrictor (10) reduces the pressure such that a sample gas flow of 15 to 30 l/h is created. This flow is subdivided via the sample gas restrictor (11) and the adjustable bypass restrictor (6) such that there is a sample gas flow of 7.5 l/h through the sensor.

If the sample gas can flow off into the atmosphere unhampered, the sample gas pressure corresponds to the atmospheric pressure. If the sample gas flows off via an exhaust gas line, it works like a flow resistance. If the resulting dynamic pressure exceeds 100 hPa (rel.), a maintenance demanded is output.

Gas path (low pressure)

Gas path OXYMAT 64, low-pressure version

With the low-pressure version, the sample gas flow must be set externally to 125 ml/min. With a built-in pressure switch, the sample gas pressure is approx. 30 hPa above the current atmospheric pressure since the sample gas flows off via a restrictor. If the resulting dynamic pressure exceeds 100 hPa (rel.), a maintenance demanded is output. In order to reduce the 90% time, we recommend installation of a bypass upstream of the gas inlet which then provides a faster exchange of gas. This is particularly important with long sample gas lines between the gas sampling point and the analyzer. Please make absolutely sure that the flow in the OXYMAT 64 does not exceed 125 ml/min.

Gas path (low pressure with integrated sample gas pump)

Low-pressure version with integral sample gas pump

The device version "OXYMAT 64 low-pressure with pump" is equipped with a sample gas pump which automatically provides a constant sample gas flow of 125 ml/min through the sensor. By means of an internal bypass, the total flow of sample gas through the analyzer is increased to approx. 0.4 l/min. This measure significantly improves the analyzer's response time.