Forced-air cooled, no external fan or fan cover, high efficiency

Order No. supplements

Motor type	Frame size	Positions 12 and 13: Voltages (voltage codes)
		Standard voltages				Further voltages
		50 Hz				50 Hz
		230 V?/400 VY	400 V?/690 VY	500 VY	500 V?	220 V?/380 VY	380 V?/660 VY	415 VY	415 V?
		60 Hz				Rated voltage range
		460 VY	460 V?			(210 … 230 V?/360 … 400 VY) ¹⁾	(360 … 400 V?/625 … 695 VY) ¹⁾	(395 … 435 VY) ¹⁾	(395 … 435 V?) ¹⁾
		see "Selection and ordering data" for outputs at 60 Hz
		22	34	27	40	21	33	23	35
1LE1001?1A..???…?? F90	100 L	O	O	O	O	?	?	?	?
1LE1001?1B..???…?? F90	112 M	O	O	O	O	?	?	?	?
1LE1001?1C..???…?Z F90	132 S/M	O	O	O	O	?	?	?	?
1LE1001?1D..???…?Z F90	160 M/L	O	O	O	O	?	?	?	?

O Without additional charge

? With additional charge

Order other voltages with voltage code9 in position 12, code0 in position 13 and the corresponding order code (see "Special versions" in the "Selection and ordering data" under "Voltages").

¹⁾ A rated voltage range is also specified on the rating plate.

Motor type	Frame size		Position 14: Types of construction (type letter)
			Without flange						With flange (acc. to DIN EN 50347)
			IM B3 ^{1) 2)}	IM B6 ²⁾	IM B7 ²⁾	IM B8 ²⁾	IM V6 ²⁾	IM V5 without protective cover ²⁾	Flange size	IM B5 ^{2) 3}	IM V1 wihout protective cover ²⁾	IM V3 ²⁾	IM B35
			A	T	U	V	D	C		F	G	H	J
		Order No. supplement –Z with order code	–	–	–	–	–	–	–	–	–	–	–
1LE1002?1A...?.?..?Z F90	100 L		?	?	?	?	?	?	FF 215	?	?	?	?
1LE1002?1B...?.?..?Z F90	112 M		?	?	?	?	?	?	FF 215	?	?	?	?
1LE1001?1C...?.?..?Z F90	132 S/M		?	?	?	?	?	?	FF 265	?	?	?	?
1LE1001?1D...?.?..?Z F90	160 M/L		?	?	?	?	?	?	FF 300	?	?	?	?

Motor type	Frame size		Position 14: Types of construction (type letter)
			With standard flange (acc. to DIN EN 50347)
			Flange size	IM B14 ^2) 4)	IM V19 ²⁾	IM V18 wihout protective cover ²⁾	IM B34
				K	L	M	N
		Order No. supplement –Z with order code	–	–	–	–	–
1LE1001?1A...?.?..?Z F90	100 L		FT 130	?	?	?	?
1LE1001?1B...?.?..?Z F90	112 M		FT 130	?	?	?	?
1LE1001?1C...?.?..?Z F90	132 S/M		FT 165	?	?	?	?
1LE1001?1D...?.?..?Z F90	160 M/L		FT 215	?	?	?	?

? Standard version

? With additional charge

¹⁾ The types of construction IM B6/7/8, IM V6 and IM V5 without protective cover are also possible as long as no condensation drainage holes (order codeH03) and no stamping of these types of construction on the rating plate are required. As standard, the type of construction IM B3 is then stamped on the rating plate.

²⁾ The type of construction is stamped on the rating plate. When ordering with condensation drainage holes (order codeH03), it is absolutely necessary to specify the type of construction for the exact position of the condensation drainage holes during manufacture.

³⁾ The types of construction IM V3 and IM V1 without protective cover are also possible as long as no condensation drainage holes (order codeH03) and no stamping of these types of construction on the rating plate are required. As standard, the type of construction IM B5 is then stamped on the rating plate.

⁴⁾ The types of construction IM V19 and IM V18 without protective cover are also possible as long as no condensation drainage holes (order codeH03) and no stamping of these types of construction on the rating plate are required. As standard, the type of construction IM B14 is then stamped on the rating plate.

Motor type	Frame size		Position 15: Motor protection (motor protection letter)
			Without motor protection	Motor protection with PTC thermistors with 3 embedded temperature sensors for tripping¹⁾	Motor protection with PTC thermistors with 6 embedded temperature sensors for alarm and tripping¹⁾	Motor temperature detection with embedded temperature sensor KTY 84-130¹⁾	NTC thermistors for tripping	Temperature detectors for tripping¹⁾
			A	B	C	F	Z	Z
		Order code					Q2A	Q3A
1LE1001?1A...?..?.?Z F90	100 L		?	?	?	?	?	?
1LE1001?1B...?..?.?Z F90	112 M		?	?	?	?	?	?
1LE1001?1C...?..?.?Z F90	132 S/M		?	?	?	?	?	?
1LE1001?1D...?..?.?Z F90	160 M/L		?	?	?	?	?	?

? Standard version

? With additional charge

¹⁾ For appropriate tripping unit, see Catalog LV 1.

Motor type	Motor frame size	Position 16: Connection box (connection box code)
		Connection box top ¹⁾	Connection box on RHS ²⁾	Connection box on LHS ²⁾	Connection box bottom ²⁾
		4	5	6	7
1LE1001?1A ...?...??Z F90	100 L	?	?	?	?
1LE1001?1B ...?...??Z F90	112 M	?	?	?	?
1LE1001?1C ...?...??Z F90	132 S/M	?	?	?	?
1LE1001?1D ...?...??Z F90	160 M/L	?	?	?	?

? Standard version

? With additional charge

¹⁾ With type of construction, cast feet as standard. Screwed-on feet are available with order codeH01, see "Special versions".

²⁾ With type of construction, screwed-on feet as standard.