Siemens
СРЕДСТВА ПРОМЫШЛЕННОЙ АВТОМАТИЗАЦИИ
официальный партнер Сименс
(4872) 700-366
skenergo@mail.ru
Self-ventilated in pole-changing version - cast-iron series 1LG4
Order No. supplements

Motor type

Penultimate position: Voltage code

Final position: Type of construction code

50 Hz, direct online starting

Without flange

With flange

With standard flange

With special flange

230 V

400 V

500 V

690 V

IM B3,
IM B6/7/8,
IM V6/5
without protective cover 1)

IM B5,
IM V1
without protective cover 2)

IM V1
with protective cover 2)3)

IM B35

IM B14,
IM V19
IM V18
without protective cover

IM B34

IM B14
IM V19
IM V18
without protective cover

1

6

5

0

0

1

4

6

2

7

3

1LG4 18 . ? . . . ??

– 

– 

– 

1LG4 20 . ? . . . ??

– 

– 

– 

1LG4 22 . ? . . . ??

– 

– 

– 

1LG4 25 . ? . . . ??

– 

– 

– 

1LG4 28 . ? . . . ??

– 

– 

– 


? Standard version

O Without additional charge

? With additional charge

? Not possible

Order other voltages with voltage code9 in the penultimate position and the corresponding order code (see "Special versions" in the "Selection and ordering data" under "Voltages").

Order other types of construction with type of construction code9 in the final position and the corresponding order code (see "Special versions" in the "Selection and ordering data" under "Types of construction").

1) If motors 1LG4 183-... to 1LG4 318-... (motor series 1LG4 frame sizes 180 M to 315 L) in types of construction with feet IM B6, IM B7, IM V6 or IM V5 without protective cover are fixed to the wall, it is recommended that the motor feet are supported.

2) 1LG4 220-... to 1LG4 318-... motors (motor series 1LG4 frame sizes 225 S to 315 L) are supplied with two screw-in eyebolts in accordance with IM B5, whereby one can be rotated in accordance with IM V1 or IM V3. It is important to note that stress must not be applied perpendicular to the ring plane.

3) The "Second shaft extension" option, order codeK16is not possible.


Каталог оборудования

Приводная техника

Двигатели переменного тока

Низковольтные двигатели

Low-Voltage Motors - IEC Squirrel-Cage Motors

1LE1 motor generation

Standard motors up to frame size 315 L

Non-standard motors frame size 315 and above

Explosion-proof motors

Motors operating with frequency converters

Pump motors

Fan motors

Orientation

Self-ventilated in pole-changing version - Aluminium series 1LA7/5

Self-ventilated in pole-changing version - cast-iron series 1LG4

Forced-air cooled, w/o ext fan+cover - Alum. series 1PP7/5

Forced-air cooled, w/o ext fan+cover, high efficiency-cast-iron 1PP4

Forced-air cooled, w/o ext fan+cover, increased output-cast-iron 1PP4

Special versions

Accessories and spare parts

Dimensions

Compressor motors

Smoke-extraction motors

Marine motors

Синхронные двигатели с возбуждением от постояннымх магнитов

Асинхронные серводвигатели/двигатели главного движения

Синхронные двигатели

Моментные двигатели 1FW

Мотор-шпиндель 2SP1 ECS

Линейные двигатели

Линейные двигатели 1FN

Шаговые двигатели 1FL3 SIMOSTEP

Системы измерения

Стояночный тормоз

Асинхронные двигатели - стандартная линия

Двигатели постоянного тока

Децентрализованная приводная техника

Преобразователи

Преобразователи постоянного тока

Инструментальное программное обеспечение

Дополнительные компоненты

Техника автоматизации

Коммуникации и сети

Низковольтная коммутационная техника

Электроустановочная техника

Специализированные сенсоры

Блоки питания

Технология безопасности

Системные решения и продукты для отраслей

Сервис

Автоматизация процесса

... и все, что Вам еще необходимо


  © ООО "СК ЭНЕРГО" 2007-2022
  (4872) 700-366  skenergo@mail.ru
Яндекс.Метрика