Siemens
01 2018
(4872) 700-366
skenergo@mail.ru

Article number

6AG2510-1SJ01-1AB0

SIPLUS ET 200SP CPU 1510 F-1 PN RAIL

General information

Product type designation

CPU 1510SP F-1 PN

Configuration control

via dataset

Yes

Control elements

Mode selector switch

1

Supply voltage

Type of supply voltage

24 V DC

permissible range, lower limit (DC)

19.2V

permissible range, upper limit (DC)

28.8V

Reverse polarity protection

Yes

Mains buffering

  • Mains/voltage failure stored energy time

5ms

Input current

Current consumption (rated value)

0.6A

Inrush current, max.

4.7A; Rated value

It

0.14As

Power

Infeed power to the backplane bus

8.75W

Power loss

Power loss, typ.

5.6W

Memory

Number of slots for SIMATIC memory card

1

SIMATIC memory card required

Yes

Work memory

  • integrated (for program)

150kbyte

  • integrated (for data)

750kbyte

Load memory

  • Plug-in (SIMATIC Memory Card), max.

32Gbyte

Backup

  • maintenance-free

Yes

CPU processing times

for bit operations, typ.

72ns

for word operations, typ.

86ns

for fixed point arithmetic, typ.

115ns

for floating point arithmetic, typ.

461ns

CPU-blocks

Number of elements (total)

2000; In addition to blocks such as DBs, FBs and FCs, UDTs, global constants, etc. are also regarded as elements

DB

  • Number range

1 ... 60 999; subdivided into: number range that can be used by the user: 1 ... 59 999, and number range of DBs created via SFC 86: 60 000 ... 60 999

  • Size, max.

750kbyte; For DBs with absolute addressing, the max. size is 64 KB

FB

  • Number range

0 ... 65 535

  • Size, max.

150kbyte

FC

  • Number range

0 ... 65 535

  • Size, max.

100kbyte

OB

  • Size, max.

150kbyte

  • Number of free cycle OBs

100

  • Number of time alarm OBs

20

  • Number of delay alarm OBs

20

  • Number of cyclic interrupt OBs

20

  • Number of process alarm OBs

50

  • Number of DPV1 alarm OBs

3

  • Number of isochronous mode OBs

1

  • Number of technology synchronous alarm OBs

2

  • Number of startup OBs

100

  • Number of asynchronous error OBs

4

  • Number of synchronous error OBs

2

  • Number of diagnostic alarm OBs

1

Nesting depth

  • per priority class

24; Up to 8 possible for F-blocks

Counters, timers and their retentivity

S7 counter

  • Number

2048

Retentivity

  • adjustable

Yes

IEC counter

  • Number

Any (only limited by the main memory)

Retentivity

  • adjustable

Yes

S7 times

  • Number

2048

Retentivity

  • adjustable

Yes

IEC timer

  • Number

Any (only limited by the main memory)

Retentivity

  • adjustable

Yes

Data areas and their retentivity

Retentive data area (incl. timers, counters, flags), max.

128kbyte; Available retentive memory for bit memories, timers, counters, DBs, and technology data (axes): 88 KB

Flag

  • Number, max.

16kbyte

  • Number of clock memories

8; 8 clock memory bits, grouped into one clock memory byte

Data blocks

  • Retentivity adjustable

Yes

  • Retentivity preset

No

Local data

  • per priority class, max.

64kbyte; max. 16 KB per block

Address area

Number of IO modules

1024; max. number of modules / submodules

I/O address area

  • Inputs

32kbyte; All inputs are in the process image

  • Outputs

32kbyte; All outputs are in the process image

per integrated IO subsystem

  • Inputs (volume)

8kbyte

  • Outputs (volume)

8kbyte

per CM/CP

  • Inputs (volume)

8kbyte

  • Outputs (volume)

8kbyte

Subprocess images

  • Number of subprocess images, max.

32

Address space per module

  • Address space per module, max.

32byte; For input and output data respectively

Address space per station

  • Address space per station, max.

1280byte; for central inputs and outputs; depending on configuration

Hardware configuration

Number of distributed IO systems

2

Number of DP masters

  • Via CM

1

Number of IO Controllers

  • integrated

1

  • Via CM

0

Rack

  • Modules per rack, max.

64; CPU + 64 modules + server module (mounting width max. 1 m)

  • Number of lines, max.

1

PtP CM

  • Number of PtP CMs

the number of connectable PtP CMs is only limited by the number of available slots

Time of day

Clock

  • Type

Hardware clock

  • Backup time

6wk; At 40 C ambient temperature, typically

  • Deviation per day, max.

10s; Typ.: 2 s

Operating hours counter

  • Number

16

Clock synchronization

  • supported

Yes

  • to DP, master

Yes; Via CM DP module

  • to DP, slave

Yes; Via CM DP module

  • in AS, master

Yes

  • in AS, slave

Yes

  • on Ethernet via NTP

Yes

Interfaces

Number of PROFINET interfaces

1

Number of PROFIBUS interfaces

1; Via CM DP module

1. Interface

Interface types

  • Number of ports

3

  • integrated switch

Yes

  • RJ 45 (Ethernet)

1. integr. + 2. via BusAdapter BA 2x RJ45

Functionality

  • PROFINET IO Controller

Yes

  • PROFINET IO Device

Yes

  • SIMATIC communication

Yes

  • Open IE communication

Yes

  • Web server

Yes

  • Media redundancy

Yes

2. Interface

Interface types

  • Number of ports

1

  • RS 485

Yes; Via CM DP module

Functionality

  • PROFIBUS DP master

Yes

  • PROFIBUS DP slave

Yes

  • SIMATIC communication

Yes

Interface types

RJ 45 (Ethernet)

  • 100 Mbps

Yes

  • Autonegotiation

Yes

  • Autocrossing

Yes

  • Industrial Ethernet status LED

Yes

RS 485

  • Transmission rate, max.

12Mbit/s

Protocols

Number of connections

  • Number of connections, max.

64

  • Number of connections reserved for ES/HMI/web

10

  • Number of connections via integrated interfaces

64

  • Number of S7 routing paths

16

PROFINET IO Controller

Services

  • PG/OP communication

Yes

  • S7 routing

Yes

  • Isochronous mode

Yes

  • Open IE communication

Yes

  • IRT

Yes

  • MRP

Yes; As MRP redundancy manager and/or MRP client; max. number of devices in the ring: 50

  • PROFIenergy

Yes

  • Prioritized startup

Yes; Max. 32 PROFINET devices

  • Number of connectable IO Devices, max.

64; In total, up to 189 distributed I/O devices can be connected via PROFIBUS or PROFINET

  • Of which IO devices with IRT, max.

64

  • Number of connectable IO Devices for RT, max.

64

  • of which in line, max.

64

  • Number of IO Devices that can be simultaneously activated/deactivated, max.

8

  • Number of IO Devices per tool, max.

8

  • Updating times

The minimum value of the update time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data

Update time for IRT

  • for send cycle of 250 s

250 s to 4 ms

  • for send cycle of 500 s

500 s to 8 ms

  • for send cycle of 1 ms

1 ms to 16 ms

  • for send cycle of 2 ms

2 ms to 32 ms

  • for send cycle of 4 ms

4 ms to 64 ms

  • With IRT and parameterization of "odd" send cycles

Update time = set "odd" send clock (any multiple of 125 s: 375 s, 625 s ... 3 875 s)

Update time for RT

  • for send cycle of 250 s

250 s to 128 ms

  • for send cycle of 500 s

500 s to 256 ms

  • for send cycle of 1 ms

1 ms to 512 ms

  • for send cycle of 2 ms

2 ms to 512 ms

  • for send cycle of 4 ms

4 ms to 512 ms

PROFINET IO Device

Services

  • PG/OP communication

Yes

  • S7 routing

Yes

  • Isochronous mode

No

  • Open IE communication

Yes

  • IRT

Yes

  • MRP

Yes

  • PROFIenergy

Yes

  • Shared device

Yes

  • Number of IO Controllers with shared device, max.

4

SIMATIC communication

  • S7 communication, as server

Yes

  • S7 communication, as client

Yes

  • User data per job, max.

See online help (S7 communication, user data size)

Open IE communication

  • TCP/IP

Yes

  • Data length, max.

64kbyte

  • several passive connections per port, supported

Yes

  • ISO-on-TCP (RFC1006)

Yes

  • Data length, max.

64kbyte

  • UDP

Yes

  • Data length, max.

1472byte

  • DHCP

No

  • SNMP

Yes

  • DCP

Yes

  • LLDP

Yes

Web server

  • HTTP

Yes; Standard and user-defined pages

  • HTTPS

Yes; Standard and user-defined pages

PROFIBUS DP master

  • Number of connections, max.

48

Services

  • PG/OP communication

Yes

  • S7 routing

Yes

  • Data record routing

Yes

  • Isochronous mode

No

  • Equidistance

No

  • Number of DP slaves

125

  • Activation/deactivation of DP slaves

Yes

Further protocols

  • MODBUS

Yes; MODBUS TCP

Media redundancy

  • Switchover time on line break, typ.

200ms

  • Number of stations in the ring, max.

50

Isochronous mode

Isochronous operation (application synchronized up to terminal)

Yes; For PROFINET only

S7 message functions

Number of login stations for message functions, max.

32

Program alarms

Yes

Number of configurable program alarms

5000

Number of simultaneously active program alarms

  • Number of program alarms

300

  • Number of alarms for system diagnostics

100

  • Number of alarms for motion technology objects

80

Test commissioning functions

Joint commission (Team Engineering)

Yes; Parallel online access possible for up to 3 engineering systems

Status block

Yes; Up to 8 simultaneously (in total across all ES clients)

Single step

No

Status/control

  • Status/control variable

Yes

  • Variables

Inputs, outputs, memory bits, DB, times, counters

  • Number of variables, max.

  • of which status variables, max.

200; per job

  • of which control variables, max.

200; per job

Forcing

  • Forcing

Yes

  • Forcing, variables

Inputs, outputs

  • Number of variables, max.

200

Diagnostic buffer

  • present

Yes

  • Number of entries, max.

1000

  • of which powerfail-proof

500

Traces

  • Number of configurable Traces

4; Up to 512 KB of data per trace are possible

Interrupts/diagnostics/status information

Diagnostics indication LED

  • RUN/STOP LED

Yes

  • ERROR LED

Yes

  • MAINT LED

Yes

  • Monitoring of the supply voltage (PWR-LED)

Yes

  • Connection display LINK TX/RX

Yes

Supported technology objects

Motion Control

Yes

  • Speed-controlled axis

  • Number of speed-controlled axes, max.

6; Max. number of speed-controlled axes (requirement: there must be no other motion technology objects created)

  • Positioning axis

  • Number of positioning axes, max.

6; Max. number of positioning axes (requirement: there must be no other motion technology objects created)

  • Synchronized axes (relative gear synchronization)

  • Number of axes, max.

3; Max. number of synchronous axes (requirement: there must be no other motion technology objects created)

  • External encoders

  • Number of external encoders, max.

6; Max. number of external encoders (requirement: there must be no other motion technology objects created)

Controller

  • PID_Compact

Yes; Universal PID controller with integrated optimization

  • PID_3Step

Yes; PID controller with integrated optimization for valves

  • PID-Temp

Yes; PID controller with integrated optimization for temperature

Counting and measuring

  • High-speed counter

Yes

Isolation

Isolation tested with

707 V DC (type test) and according to EN 50155 (routine test)

Standards, approvals, certificates

Railway application

  • EN 50121-3-2

Yes; EMC for rail vehicles

  • EN 50121-4

Yes; EMC for signal and telecommunications systems

  • EN 50124-1

Yes; Railway applications - overvoltage category OV2; pollution degree PD2; rated surge voltage UNi = 0.5 kV; UNm = 24 V DC

  • EN 50125-1

Yes; Rail vehicles - see ambient conditions

  • EN 50125-2

Yes; Stationary electrical equipment - see ambient conditions

  • EN 50125-3

Yes; Signal and telecommunications systems - see ambient conditions; vibrations and shocks: Application point outside of tracks (1 m to 3 m away from track)

  • EN 50155

Yes; Rail vehicles - temperature class T1, horizontal mounting position, salt spray Class ST2

  • EN 61373

Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B

  • Fire protection acc. to EN 45545-2

Yes; Rail vehicles - verification on request

Highest safety class achievable in safety mode

  • SIL in accordance with EN 50126, 50128, 50129

SIL 2; a higher safety integrity level is possible if tested and approved for the specific application under consideration of all local regulations.

Probability of failure (for service life of 20 years and repair time of 100 hours)

  • Low demand mode: PFDavg in accordance with SIL3

< 2.00E-05

  • High demand/continuous mode: PFH in accordance with SIL3

< 1.00E-09 1/h

Ambient conditions

Ambient temperature during operation

  • horizontal installation, min.

-25C; = Tmin

  • horizontal installation, max.

60C; = Tmax; +70 C for 10 min (T1 acc. to EN 50155)

Ambient temperature during storage/transportation

  • min.

-40C

  • max.

70C

Altitude during operation relating to sea level

  • Ambient air temperature-barometric pressure-altitude

Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)

Relative humidity

  • With condensation, tested in accordance with IEC 60068-2-38, max.

100%; RH incl. condensation/frost (no commissioning under condensation conditions)

Use in stationary industrial systems

  • to biologically active substances according to EN 60721-3-3

Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request

  • to chemically active substances according to EN 60721-3-3

Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!

  • to mechanically active substances according to EN 60721-3-3

Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!

Use on land craft, rail vehicles and special-purpose vehicles

  • to biologically active substances according to EN 60721-3-5

Yes; Class 5B2 mold, fungus and dry rot spores (with the exception of fauna); Class 5B3 on request

  • to chemically active substances according to EN 60721-3-5

Yes; Class 5C3 (RH < 75%) including salt spray according to EN 50155 (ST2). The supplied plug covers must remain in place over the unused interfaces during operation!

  • to mechanically active substances according to EN 60721-3-5

Yes; Class 5S3 including sand and dust. The supplied plug covers must remain in place over the unused interfaces during operation!

Configuration

Programming

Programming language

  • LAD

Yes; incl. failsafe

  • FBD

Yes; incl. failsafe

  • STL

Yes

  • SCL

Yes

  • GRAPH

Yes

Know-how protection

  • User program protection/password protection

Yes

  • Copy protection

Yes

  • Block protection

Yes

Access protection

  • Protection level: Write protection

Yes

  • Protection level: Read/write protection

Yes

  • Protection level: Complete protection

Yes

Cycle time monitoring

  • lower limit

adjustable minimum cycle time

  • upper limit

adjustable maximum cycle time

Dimensions

Width

100mm

Height

117mm

Depth

75mm

Weights

Weight, approx.

310g

Other

Note:

For use in railway applications, also observe the product information "SIPLUS extreme RAIL" A5E37661960A Online Support article 109736776


















skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
DENDOR

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS -

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK -

  © " " 2007-2022
  (4872) 700-366  skenergo@mail.ru
.