SIPLUS ET 200SP CPU 1510SP F-1 PN T1 RAIL is snapped directly onto the standard DIN rail and features:

• A high-performance processor;
  the CPU achieves command execution times as low as 72 ns per binary instruction
• Extensive work memory:
  150 KB for program, 750 KB for data
• SIMATIC Memory Cards as load memory;
  permitting additional functions such as firmware update, datalog and archiving
• Bit-modular expandability for maximum flexibility;
  up to 64 I/O modules (I/O, technology, and communications modules) in any combination. Station width up to 1 m.
• PROFINET IO IRT interface with 3 integrated switch ports:
  • Port 1 and 2 via BusAdapter (SIPLUS ET 200SP CPU 1510SP F-1 PN T1 RAIL is supplied without the BusAdapter and can also be operated without it). The appropriate BusAdapter (BA 2xRJ45 or BA 2xFC) is to be ordered separately if needed.
  • Port 3 via integrated RJ45 socket.
• Integrated communication functions:
  • PG/OP communication
  • PROFINET IO
  • Open IE communication (TCP, ISO-on-TCP and UDP)
  • Web server
  • S7 communication
  • S7 routing
  • Data set routing
• Maintenance-free data backup without battery
• Diagnostics displays for errors (Error), operation (RUN/Stop), maintenance (MT), power supply (PWR) and one link LED per port
• Optional labeling using light gray or yellow labeling strips. There is a choice of 2 materials:
  • Foil and roll with 500 strips, for thermal transfer roll printer
  • Paper (280 g/m²), DIN A4 sheets with 100 strips each, for laser printer
• The ET 200SP CPU can be equipped with a reference ID label.
• Different PROFINET connection types by means of BusAdapter:
  • Under standard ambient conditions, BA 2xRJ45 for connection via RJ45 plug
  • In the case of mechanical loading during operation and/or an increased EMC requirements BA 2xFC for direct connection of the PROFINET cable
• Dark BaseUnit as first BaseUnit behind the ET 200SP CPU when using an AC I/O module or an AI Energy Meter ST as the first I/O module

Scope of delivery

SIPLUS ET 200SP CPU 1510SP F-1 PN T1 RAIL including server module, 24 V DC connector and cover for BusAdapter port (BusAdapter must be ordered separately)