SIPLUS ET 200SP TM Pulse 2x24 V T1 RAIL pulse output module . Обзор. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS ET 200SP TM Pulse 2x24 V T1 RAIL pulse output module

| | | | | | |

2-channel pulse output module for SIPLUS ET 200SP
Approved in accordance with the EN 50155, EN 15121, EN 50124, EN 50125 and EN 45545 railway standards for use in rail traffic
Operating modes:
- Single pulse with defined length
- Pulse chain with defined number of pulses
- Pulse width modulation (with flexible ON period, optional current control and dither function)
- PWM signal for controlling a DC motor
- On and OFF delay; rising and falling edge can be delayed separately to the microsecond
- Frequency output with defined output frequency
Hardware:
- 2 24V channels, 2A output current can be switched in parallel to boost performance to 4A of output current
- Switching frequencies to 10 kHz; at reduced output current to 0.1 A up to 100 kHz
- Push/pull output driver for especially steep edges at the outputs
- Polarity change in DC motor operation for direction reversal
- 1 high-speed 24 V digital input per channel with parameterizable input delay from 4 µs
Channel functions:
- HW enable;
  Start of signal output with the onboard digital input
- Parameterizable ON delay;
  for precise deceleration between the HW enable and the start of output
- Current measurement in the operating modes pulse-width modulation and pulse chain;
  enables control of the output current mean value over a period. Temperature influences can thus be balanced to the resistance of the actuator.
- Cyclic control of the respective main setpoint from the PLC in every operating mode;
  other values can be modified flexibly from the user program.
Supported system functions:
- Isochronous mode;
  enables precision-timed connection of the setpoint output to a higher-level controller
- Firmware update
- Identification data I&M

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания