Climatic conditions

Ambient temperature

+5° ... +40 °C (standard)

• With heating

Min. ‑5 °C

Relative humidity

75% (annual average), non-condensing

Sample gas conditions

Sample gas must not be flammable or explosive.

Max. sample gas pressure at inlet to sample preparation system

500 hPa (mbar)

Max. moisture content in sample gas¹⁾²⁾

• 17 vol % (cooler type: CSS), with PVDF heat exchanger
• 25 vol % (cooler type: EGK 2‑19), with glass heat exchanger

Sample gas temperature

Max. 200 °C at cabinet entry

Sample gas flow

Approx. 60 l/h per analyzer

Sampling probe

• Dust load: < 2 g/m³
• Mounting flange: DN 65, PN 6, form B
• Including temperature controller with Pt100
• With internal sampling tube, stainless steel, length: 1 m (can be shortened)
• With filter in probe, to 600 °C

Sample gas line, electrically heated

Max. 50 m

Power supply

Supply 1

230 V AC, 50 вЂ¦ 60 Hz (-15%, +10%);
on request

Supply 2

400 V AC, 50 вЂ¦ 60 Hz (-15%, +10%)

Power

Max. 4 000 VA; without heated sample gas line

System design

Fusing of electronic consumers

1-pole or 2-pole (selectable)

Sample gas cooler

2-stage

Output signals

• 4 вЂ¦ 20 mA; corresponding to the analyzer information or via PROFIBUS DP
• Additional digital inputs and outputs via PLC (SIMATIC S7‑1200)

Color

RAL 7035

Weight

Approx. 160 kg

Sheet-steel cabinet/frame

Indoor installation

Explosion protection classification

Installation outside the Ex zone

Degree of protection

IP54

Calibration

Semi-automatic for fully automatic; AUTOCAL on ULTRAMAT 23 freely adjustable up to max. 24-hour interval

Dimensions

Sheet-steel cabinet (with base) for indoor installation

2 100 x 800 x 800 mm (H x W x D)

500 mm spacing on the right or left must be provided for the cable inlet and connection of the heated sample gas line.