SIPLUS extreme RAIL digital inputs . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS extreme RAIL digital inputs

| | | | | |

Article number	6AG2131-6BH00-4BA0	6AG2131-6TF00-4CA0	6AG2131-6FD00-4BB1
	SIPLUS ET 200SP DI 16X24VDC ST TX RAIL	SIPLUS ET 200SP DI 8xNAMUR HF TX RAIL	SIPLUS ET 200SP DI 4X120/230VAC TX RAIL
General information
Product type designation	DI 16x24 VDC ST	DI 8xNAMUR HF	DI 4x120 ... 230 V AC ST
Firmware version
в—Џ FW update possible	Yes	Yes	Yes
usable BaseUnits	BU type A0	BU type A0	BU type B1
Color code for module-specific color identification plate	CC00	CC01	CC41
Product function
в—Џ I&M data	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3
Operating mode
в—Џ DI	Yes	Yes	Yes
в—Џ Counter	No	No	No
в—Џ Oversampling	No	No	No
в—Џ MSI	No	No	No
Supply voltage
Rated value (DC)	24 V	24 V
permissible range, lower limit (DC)	19.2 V	19.2 V
permissible range, upper limit (DC)	28.8 V	28.8 V
Rated value (AC)			230 V
Reverse polarity protection	Yes	Yes	No
Input current
Current consumption (rated value)			10 mA
Current consumption, max.	90 mA
Encoder supply
Number of outputs		8	4
Short-circuit protection	No	Yes	No; when using BU type B1, a fuse with 10 A tripping current must be provided
Output current
в—Џ up to 60 °C, max.			10 A
24 V encoder supply
в—Џ 24 V	No	No	No
в—Џ Short-circuit protection	No	No	No
Power loss
Power loss, typ.	1.7 W	1.5 W	1 W; Active power, load voltage 230 V, all inputs connected with 230 V, 50 Hz
Address area
Address space per module
в—Џ Address space per module, max.	2 byte; + 2 bytes for QI information	1 byte; + 1 byte for QI information	1 byte; + 1 byte for QI information
в—Џ Inputs			1 byte
Selection of BaseUnit for connection variants
в—Џ 1-wire connection		BU type A0	BU type B1
в—Џ 2-wire connection		BU type A0	BU type B1
в—Џ 3-wire connection		BU type A0 + external terminals	BU type B1
в—Џ 4-wire connection		BU type A0 + external terminals	BU type B1 + external terminals
Digital inputs
Number of digital inputs	16; > +60 °C, number of simultaneously controllable inputs max. 4	8; > +60 °C number of simultaneously controllable inputs max. 4 (no adjacent points)	4
Digital inputs, parameterizable		Yes
Source/sink input	P-reading		No
Input characteristic curve in accordance with IEC 61131, type 1	Yes
Input characteristic curve in accordance with IEC 61131, type 2	No
Input characteristic curve in accordance with IEC 61131, type 3	Yes		Yes
Pulse extension	No	Yes; 0.5 s, 1 s, 2 s	No
Edge evaluation		Yes; rising edge, falling edge, edge change
Signal change flutter		Yes; 2 to 32 signal changes
Flutter observation window		Yes; 0.5 s, 1 s to 100 s in 1-s steps
Input voltage
в—Џ Type of input voltage	DC	DC	120/230 V AC (47 Hz to 63 Hz)
в—Џ Rated value (DC)	24 V	8.2 V
в—Џ Rated value (AC)			230 V
в—Џ for signal "0"	-30 to +5V		0V AC to 40V AC
в—Џ for signal "1"	+11 to +30V		74 V AC to 264 V AC
Input current
в—Џ for signal "1", typ.	2.5 mA		10.8 mA
for 10 k switched contact
вЂ” for signal "0"		0.35 to 1.2 mA
вЂ” for signal "1"		2.1 to 7 mA
for unswitched contact
вЂ” for signal "0", max. (permissible quiescent current)		0.5 mA
вЂ” for signal "1"		typ. 8 mA
for NAMUR encoders
вЂ” for signal "0"		0.35 to 1.2 mA
вЂ” for signal "1"		2.1 to 7 mA
Input delay (for rated value of input voltage)
в—Џ tolerated changeover time for changeover contacts		300 ms
for standard inputs
вЂ” parameterizable	Yes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms (in each case + delay of 30 to 500 µs, depending on line length)	No	No
вЂ” at "0" to "1", min.	0.05 ms		1.5 ms
вЂ” at "0" to "1", max.	20 ms		4 ms
вЂ” at "1" to "0", min.	0.05 ms		10 ms
вЂ” at "1" to "0", max.	20 ms		10 ms
for interrupt inputs
вЂ” parameterizable	No
for counter/technological functions
вЂ” parameterizable	No
for NAMUR inputs
вЂ” at "0" to "1", max.		12 ms
вЂ” at "1" to "0", max.		12 ms
Cable length
в—Џ shielded, max.	1 000 m	200 m	1 000 m
в—Џ unshielded, max.	600 m		600 m
Encoder
Connectable encoders
в—Џ NAMUR encoder/changeover contact according to EN 60947		Yes
в—Џ Single contact / changeover contact unconnected		Yes
в—Џ Single contact / changeover contact connected with 10 kО©		Yes
в—Џ 2-wire sensor	Yes		Yes
вЂ” permissible quiescent current (2-wire sensor), max.	1.5 mA
Isochronous mode
Isochronous operation (application synchronized up to terminal)	No	No	No
Interrupts/diagnostics/status information
Diagnostics function	Yes	Yes
Alarms
в—Џ Diagnostic alarm	Yes	Yes; channel by channel	No
в—Џ Hardware interrupt		Yes; Parameterizable, channels 0 to 7	No
Diagnostic messages
в—Џ Diagnostic information readable	Yes	Yes
в—Џ Monitoring the supply voltage	Yes	Yes
вЂ” parameterizable	Yes	Yes
в—Џ Monitoring of encoder power supply	No	Yes; channel by channel
в—Џ Wire-break	Yes; Module-wise	Yes; channel by channel	No
в—Џ Short-circuit	No	Yes; channel by channel	No
в—Џ Group error	Yes	Yes	Yes
Diagnostics indication LED
в—Џ Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED	Yes; green PWR LED	Yes; green PWR LED
в—Џ Channel status display	Yes; Green LED	Yes; Green LED	Yes; Green LED
в—Џ for channel diagnostics	No	Yes; Red LED	No
в—Џ for module diagnostics	Yes; green/red DIAG LED	Yes; green/red DIAG LED	Yes; green/red DIAG LED
Potential separation
Potential separation channels
в—Џ between the channels	No	No	No
в—Џ between the channels and backplane bus	Yes	Yes	Yes
в—Џ between the channels and the power supply of the electronics	No	Yes	No
Isolation
Isolation tested with	707 V DC (type test) and according to EN 50155 (routine test)	707 V DC (type test) and according to EN 50155 (routine test)	2 300 V AC for 1 minute (type test) and according to EN 50155 (routine test)
Standards, approvals, certificates
Railway application
в—Џ EN 50121-3-2	Yes; EMC for rail vehicles	Yes; EMC for rail vehicles	Yes; EMC for rail vehicles
в—Џ EN 50121-4	Yes; EMC for signal and telecommunications systems	Yes; EMC for signal and telecommunications systems	Yes; EMC for signal and telecommunications systems
в—Џ EN 50124-1	Yes; Railway applications - overvoltage category OV2; pollution degree PD2; rated surge voltage UNi = 0.5 kV; UNm = 24 V DC	Yes; Railway applications - overvoltage category OV2; pollution degree PD2; rated surge voltage UNi = 0.5 kV; UNm = 24 V DC	Yes; Railway applications - overvoltage category OV2; pollution degree PD2; rated surge voltage UNi = 0.5 kV; UNm = 24 V DC
в—Џ EN 50125-1	Yes; Rail vehicles - see ambient conditions	Yes; Rail vehicles - see ambient conditions	Yes; Rail vehicles - see ambient conditions
в—Џ EN 50125-2	Yes; Stationary electrical equipment - see ambient conditions	Yes; Stationary electrical equipment - see ambient conditions	Yes; Stationary electrical equipment - see ambient conditions
в—Џ EN 50125-3	Yes; Signal and telecommunications systems - see ambient conditions; vibrations and shocks: Application point outside of tracks (1 m to 3 m away from track)	Yes; Signal and telecommunications systems - see ambient conditions; vibrations and shocks: Application point outside of tracks (1 m to 3 m away from track)	Yes; Signal and telecommunications systems - see ambient conditions; vibrations and shocks: Application point outside of tracks (1 m to 3 m away from track)
в—Џ EN 50155	Yes; Rail vehicles - temperature class Tx, horizontal mounting position, salt spray Class ST2	Yes; Rail vehicles - temperature class Tx, horizontal mounting position, salt spray Class ST2	Yes; Rail vehicles - temperature class Tx, horizontal mounting position, salt spray Class ST2
в—Џ EN 61373	Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B	Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B	Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B
в—Џ Fire protection acc. to EN 45545-2	Yes; Rail vehicles - verification on request	Yes; Rail vehicles - verification on request	Yes; Rail vehicles - verification on request
Ambient conditions
Ambient temperature during operation
в—Џ horizontal installation, min.	-40 °C; = Tmin	-40 °C; = Tmin	-40 °C; = Tmin
в—Џ horizontal installation, max.	70 °C; = Tmax; +85 °C for 10 min (Tx acc. to EN 50155)	70 °C; = Tmax; +85 °C for 10 min (Tx acc. to EN 50155)	70 °C; = Tmax; +85 °C for 10 min (Tx acc. to EN 50155)
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; incl. condensation / frost permitted (no commissioning under condensation conditions)
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Use on land craft, rail vehicles and special-purpose vehicles
вЂ” to biologically active substances according to EN 60721-3-5	Yes; Class 5B2 mold, fungus and dry rot spores (with the exception of fauna); Class 5B3 on request	Yes; Class 5B2 mold, fungus and dry rot spores (with the exception of fauna); Class 5B3 on request	Yes; Class 5B2 mold, fungus and dry rot spores (with the exception of fauna); Class 5B3 on request
вЂ” to chemically active substances according to EN 60721-3-5	Yes; Class 5C3 (RH < 75%) including salt spray according to EN 50155 (ST2). The supplied plug covers must remain in place over the unused interfaces during operation!	Yes; Class 5C3 (RH < 75%) including salt spray according to EN 50155 (ST2). The supplied plug covers must remain in place over the unused interfaces during operation!	Yes; Class 5C3 (RH < 75%) including salt spray according to EN 50155 (ST2). The supplied plug covers must remain in place over the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-5	Yes; Class 5S3 including sand and dust. The supplied plug covers must remain in place over the unused interfaces during operation!	Yes; Class 5S3 including sand and dust. The supplied plug covers must remain in place over the unused interfaces during operation!	Yes; Class 5S3 including sand and dust. The supplied plug covers must remain in place over the unused interfaces during operation!
Dimensions
Width	15 mm	15 mm	20 mm
Height	73 mm	73 mm	73 mm
Depth	58 mm	58 mm	58 mm
Weights
Weight, approx.	28 g	32 g	36 g
Other
Note:	For use in railway applications, also observe the product information "SIPLUS extreme RAIL" A5E37661960A Online Support article 109736776	For use in railway applications, also observe the product information "SIPLUS extreme RAIL" A5E37661960A Online Support article 109736776	For use in railway applications, also observe the product information "SIPLUS extreme RAIL" A5E37661960A Online Support article 109736776

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания