ET 200SP, DI 16x 24 V DC ST, PU 1

Yes; I&M0 to I&M3

Yes

No

No

No

DC

24 V

Yes

No

No

No

16; > +60 °C, number of simultaneously controllable inputs max. 4

P-reading

Yes

No

Yes

No

DC

24 V

-30 to +5V

+11 to +30V

2.5 mA

Yes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms (in each case + delay of 30 to 500 µs, depending on line length)

No

No

1 000 m

600 m

Yes

1.5 mA

No

Yes

Yes

Yes

Yes

Yes

No

Yes; Module-wise

No

Yes

Yes; green PWR LED

Yes; Green LED

No

Yes; green/red DIAG LED

Yes

707 V DC (type test) and according to EN 50155 (routine test)

Yes; EMC for rail vehicles

Yes; EMC for signal and telecommunications systems

Yes; Railway applications - overvoltage category OV2; pollution degree PD2; rated surge voltage UNi = 0.5 kV; UNm = 24 V DC

Yes; Rail vehicles - see ambient conditions

Yes; Stationary electrical equipment - see ambient conditions

Yes; Signal and telecommunications systems - see ambient conditions; vibrations and shocks: Application point outside of tracks (1 m to 3 m away from track)

Yes; Rail vehicles - temperature class Tx, horizontal mounting position, salt spray Class ST2

Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B

Yes; Rail vehicles - verification on request

-40 °C; = Tmin

70 °C; = Tmax; +85 °C for 10 min (Tx acc. to EN 50155)

Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)

100 %; RH incl. condensation/frost (no commissioning under condensation conditions)

Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 5B2 mold and fungal spores (excluding fauna). The supplied plug covers must remain in place over the unused interfaces during operation!

Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 5C3 (RH < 75%) including salt spray according to EN 50155 (ST2). The supplied plug covers must remain in place over the unused interfaces during operation!

Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 5S3 including sand and dust. The supplied plug covers must remain in place over the unused interfaces during operation!

15 mm

28 g

For use in railway applications, also observe the product information "SIPLUS extreme RAIL" A5E37661960A Online Support article 109736776