Siemens
СРЕДСТВА ПРОМЫШЛЕННОЙ АВТОМАТИЗАЦИИ
официальный партнер Сименс
Каталог СА01 2017
архивный
(4872) 700-366
skenergo@mail.ru

ET 200SP
SIMATIC ET 200SP

The scalable SIMATIC ET 200SP I/O system is a highly flexible, modular I/O system with IP20 degree of protection. Via an interface module with PROFINET or PROFIBUS interface it can exchange IO data of the connected I/O modules with a higher-level control system. Alternatively, as further head-end stations, various PLC, F-PLC and open controllers are available as compact S7-1500 controllers (distributed controllers). ET 200SP components are available as SIPLUS version for extreme requirements and a high degree of robustness.

Compact design

  • Modular configuration with up to 64 modules
  • System-integrated self-assembling load group supply without power module via light BaseUnits
  • Small size and highly flexible due to the modular design and comprehensive product range
  • Up to 16 channels per module
  • Permanent wiring
  • Hot swapping: Module replacement without tools in RUN
  • Operation with gaps

Flexible connection system

  • Push-in terminals for cross-sections up to 1.5 mm2 with wire end ferrule, and up 2.5 mm2 without wire end ferrule
  • BaseUnits for 1-wire or direct multi-wire connection
  • Optimum accessibility for wiring due to spring release and measuring tap next to the conductor opening
  • Flexible PROFINET connection via BusAdapter (RJ45, FastConnect, plastic or glass fiber-optic cables), also as integrated media converter

Safety Integrated

  • Easy integration of fail-safe modules
  • Easy F parameter assignment via software
  • Group-by-group disconnection of non-failsafe modules

High performance

  • Isochronous PROFINET
  • Internal data transfer with up to 100 Mbit/s
  • Record analog values and output as of 50 µs
  • Record digital values and output as of 1 µs

High-performance technology

  • Modules for the functions Counting, Positioning, Weighing

Energy efficiency

  • Energy meter for recording electrical variables
  • System-integrated PROFIenergy with interval substitute values

Advanced functions

  • Configuration control:
    application-based adaptation of the actual configuration via user software (option handling)
  • Time-based IO:
    time stamping of the signals to the µs
  • MSI/MSO:
    Simultaneous access to I/O data from up to 4 PLCs
  • Oversampling:
    n-fold acquisition or output of digital and analog signals within a PN cycle
  • Adaptation of measuring range:
    increased resolution by adapting the measuring range to a limited section of a measuring range supported by the analog input module
  • Scaling of measured values:
    permits the transmission of the analog value normalized to the required physical value as a REAL value (32-bit floating point)

Communication standards

  • PROFINET IO
  • PROFIBUS DP V0/V1
  • ET connection for connecting the ET 200AL (IP67)
  • IO-Link V1.1
  • AS-Interface
  • Point-to-point (RS 232, RS 485, RS 422)

CPU

  • PROFINET connection with 3 ports
  • IO Controller and PNIO Device
  • Optional expansion as DP master/slave
  • Also as failsafe version and open controller

Labeling of I/O modules

  • Meaningful labeling on the front of the I/O modules
  • Optionally expandable with
    • Labeling strips
    • Equipment labeling plate
Overview of ET 200SP components

Basic components

Function

Mounting rail according to EN 60715

The mounting rail is the module support of the ET 200SP. The ET 200SP is mounting on the mounting rail.

CPU

The CPU:

  • executes the user program.
  • is used as IO Controller, I-Device on PROFINET IO, or as standalone CPU
  • connects the ET 200SP with the IO Devices or the IO Controller
  • exchanges data with the I/O modules via the backplane bus

Further functions of the CPU:

  • Communication via PROFIBUS DP (in combination with the CM DP communication module, the CPU can be used as DP master or slave)
  • Integrated Web server
  • Integrated technology
  • Integrated trace functionality
  • Integrated system diagnostics
  • Integrated safety

Open controller

As the first controller of this type, the SIMATIC ET 200SP Open Controller combines the functions of a PC-based software controller with visualization, PC applications and central I/Os (inputs/outputs) in a single, compact device.

  • All in one
  • High system availability
  • Compact and modular
  • Rugged
  • User-friendly design
  • Efficient engineering in the TIA Portal

Interface modules for PROFINET IO (IM 155-6PN)

The interface module:

  • is used as IO Device on the PROFINET IO
  • connects the ET 200SP with the IO Controller
  • exchanges data with the I/O modules via the backplane bus

Interface module for PROFIBUS DP (IM 155-6DP)

The interface module:

  • is used as DP slave on the PROFIBUS DP
  • connects the ET 200SP with the DP master
  • exchanges data with the I/O modules via the backplane bus

BusAdapter (BA)

BusAdapters permit the free selection of the connection method and connection technology for head-end stations with PROFINET interface.

Various versions are available for the connection of copper cables or plastic and glass fiber-optic cables. Hybrid copper/fiber-optic versions are also available as integrated media converters.

Cable length between 2 stations:
max. 100 m (Cu), max. 50 m (POF), max 100 m (PCF), max. 3 km (glass FOC).

For expanding the station with the I/O systems ET 200AL via ET-connection, the BusAdapter BA-Send is available.

BaseUnit (BU)

The BaseUnits provide the electrical and mechanical connection for the ET 200SP components.

  • Bright BaseUnits permit a new potential group up to max. 10 A
  • Dark BaseUnits forward the self-assembling voltage busbars P1, P2 and AUX from the left to the right BaseUnit.
  • Suitable BaseUnits with 12 to 28 terminals are available for different connection systems (single or direct multi-conductor connection) and functions.
  • The I/O module is plugged onto the desired BaseUnit and determines the potential assignment of the terminals on the BaseUnit.
  • For expanding the station with the I/O systems ET 200AL via ET-connection, the BaseUnit BU-Send is available.

I/O modules and fail-safe I/O modules

The I/O module determines the function at the terminals. The controller detects the current process state via the connected sensors and triggers corresponding responses via the connected actuators. Some I/O modules feature extended functions, in part they are also designed as individual operating mode. I/O module are divided into the following module types; the fail-safe versions are identified by a preceding “F-” and a yellow module enclosure.

  • DI (digital input)
  • DQ (digital output)
  • AI (analog input)
  • AQ (analog output)
  • TM (technology modules)
  • CM (communications modules)
  • SM (special modules)

Protective cover (BU cover)

The ET 200SP system can be operated with any number of slot gaps (BU slot without I/O module). Applications for this include:

  • partial commissioning
  • prewired, and currently unequipped options

To protect against damage, such slot gaps must be covered by a BU cover. Within the BU cover, an equipment labeling plate can be kept for the possible later use of an I/O module.

Versions:

  • for BaseUnits with a width of 15 mm
  • for BaseUnits with a width of 20 mm

Server module

The server module concludes the setup of an ET 200SP station. On the server module there are holders for 3 spare fuses (5 ? 20 mm). The server module is included in the scope of delivery of all head-end stations.

Coding element

When plugging an I/O module onto a BaseUnit for the first time, the coding element moves from the I/O module to the BaseUnit. There it prevents the destruction of the ET 200SP components in the event of a subsequent module replacement with incorrectly selected I/O module.

The coding element is available in two versions:

  • Mechanical coding element
  • Electronic coding element:
    Additionally features an electronic, re-writable memory for the redundant storage of module-specific configuration data (e.g. F target address for fail-safe modules, parameter data for IO-Link master). Thus these data are automatically backed up during a module replacement.

Shield connection

The shield connection permits the connection of cable shields. Compared to external shield supports, the system offers the following advantages:

  • Quick installation without tools by plugging the shield connection element onto the BaseUnit
  • Automatic low-impedance connection to the functional ground (mounting rail)
  • Optimized EMC-properties by separating the supply voltage lines from the signal lines by means of the shield connection element and short, unshielded cable lengths
  • Low space requirements

Labeling strips

Optionally, for system-specific marking the head-end stations and I/O modules can be equipped with labeling strips (13 x 31 mm). The labeling strips can be inscribed mechanically. Labeling strips are available in two versions in the colors light gray and yellow:

  • 500 strips on the roll, for printing on thermal-transfer printers.
    Core diameter 40 mm, external diameter 70 mm, width 62 mm.
  • 10 DIN A4 sheets with 100 strips each, card 180 g/mm2, perforated, for printing with a laser printer direct from TIA Portal or via print templates.

Equipment labeling plate

Optionally, one equipment labeling plate each can be plugged onto head-end stations, BusAdapters, BaseUnits, and I/O modules. Equipment labeling plates are supplied in packs of 10 sheets with 16 labels each. The labels can be printed with thermal-transfer card printers or plotters, or stickers can be attached to them. Advantages compared to labels that are attached directly:

  • The inscription on the front is not covered
  • Simple label replacement when replacing a module
  • No parallax errors when marking the BaseUnits on the mounting plate

The size of the inscribable area of the labels is 14.8 x 10.5 mm (W x H)

Color-coded labels

The I/O modules that are plugged onto the BaseUnits determine the potentials connected at the process terminals. The +/- potentials can optionally be identified using module-specific color-coded labels. The potentials of the AUX and add-on terminals can also be marked using color-coded labels. Advantages of the color-coded labels:

  • Quick installation (one label for marking 16 terminals)
  • Avoidance of wiring errors
  • Simple detection of potentials during servicing


SIPLUS extreme RAIL ET 200SP
  • Integrated and modular control solution for rail systems and signaling systems
  • Insulation testing for every unit
  • Conformal coating
  • Temperature class TX: -40°C … +85°C * and T1: -40°C … 70°C * (* includes +15K overtemperature for 10 minutes)
  • Seamless integration into the common TIA Portal engineering framework
  • 3 PROFINET / Ethernet interfaces
  • High electromagnetic immunity to interference (EMC) and mechanical resilience (vibration and shock)
  • Integrated system diagnostics
  • For use in a multitude of applications, such as the control of fire detection and extinguishing systems, axle counting, points heating and platform screen doors

For further information, please go to:

http://www.siemens.com/siplus-extreme-rail

















skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Арматура DENDOR

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Датчики и измерители

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Регуляторы и регистраторы

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Пневматическое оборудование

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Краны и Клапаны

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Измерительные приборы

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Системы беспроводного управления «умный дом»

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания

  © ООО "СК ЭНЕРГО" 2007-2022
  (4872) 700-366  skenergo@mail.ru
Яндекс.Метрика