SIPLUS extreme RAIL interface modules . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS extreme RAIL interface modules

| | | | | |

Article number	6AG2155-6AA00-4BN0	6AG2155-6AU00-4BN0	6AG2155-6AU00-1CN0
	SIPLUS ET 200SP IM155-6PN ST BA TX RAIL	SIPLUS ET 200SP IM155-6PN ST TX RAIL	SIPLUS ET 200SP IM155-6PN HF T1 RAIL
General information
Product type designation	IM 155-6 PN ST	IM 155-6 PN ST	IM 155-6 PN HF
Product function
в—Џ I&M data	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M4
Configuration control
via dataset	Yes	Yes	Yes
Supply voltage
Type of supply voltage			24 V DC
Rated value (DC)	24 V	24 V	24 V
permissible range, lower limit (DC)	19.2 V	19.2 V	19.2 V
permissible range, upper limit (DC)	28.8 V	28.8 V	28.8 V
Reverse polarity protection	Yes	Yes	Yes
Mains buffering
в—Џ Mains/voltage failure stored energy time	5 ms	5 ms	5 ms
Input current
Current consumption, max.	450 mA	450 mA	700 mA
Inrush current, max.	3.7 A	3.7 A	4.5 A
IІt	0.09 AІ·s	0.09 AІ·s	0.09 AІ·s
Power loss
Power loss, typ.	1.9 W	1.9 W	2.4 W
Address area
Address space per module
в—Џ Address space per module, max.	256 byte; per input / output	256 byte; per input / output	288 byte; For input and output data respectively
Address space per station
в—Џ Address space per station, max.	512 byte; Dependent on configuration	512 byte; Dependent on configuration	1 440 byte; Dependent on configuration
Hardware configuration
Rack
в—Џ Modules per rack, max.	32; + 16 ET 200AL modules	32; + 16 ET 200AL modules	64; + 16 ET 200AL modules
Submodules
в—Џ Number of submodules per station, max.	256	256	256
Interfaces
Number of PROFINET interfaces	1; 2 ports (switch)	1; 2 ports (switch)	1; 2 ports (switch)
1. Interface
Interface types
в—Џ Number of ports	2	2	2
в—Џ integrated switch	Yes	Yes	Yes
в—Џ RJ 45 (Ethernet)	Yes; Pre-assembled BusAdapter BA 2x RJ45
в—Џ BusAdapter (PROFINET)	Yes; Applicable BusAdapter: BA 2x RJ45, BA 2x FC	Yes; Applicable BusAdapter: BA 2x RJ45, BA 2x FC	Yes; Compatible BusAdapter: BA 2x RJ45, BA 2x FC, BA 2x SCRJ (from FS03, V2.2), BA SCRJ / RJ45 (from FS03, V3.1), BA SCRJ / FC (from FS03, V3.1), BA 2x LC (from FS03, V3.3), BA LC / RJ45 (from FS03, V3.3), BA LC / FC (from FS03, V3.3)
Functionality
в—Џ PROFINET IO Device	Yes	Yes	Yes
в—Џ Open IE communication	Yes	Yes	Yes
в—Џ Media redundancy	Yes; PROFINET MRP	Yes; PROFINET MRP	Yes; PROFINET MRP
Interface types
RJ 45 (Ethernet)
в—Џ Transmission procedure	PROFINET with 100 Mbit/s full duplex (100BASE-TX)	PROFINET with 100 Mbit/s full duplex (100BASE-TX)	PROFINET with 100 Mbit/s full duplex (100BASE-TX)
в—Џ 10 Mbps	Yes; for Ethernet services	Yes; for Ethernet services	No
в—Џ 100 Mbps	Yes; PROFINET with 100 Mbit/s full duplex (100BASE-TX)	Yes; PROFINET with 100 Mbit/s full duplex (100BASE-TX)	Yes; PROFINET with 100 Mbit/s full duplex (100BASE-TX)
в—Џ Autonegotiation	Yes	Yes	Yes
в—Џ Autocrossing	Yes	Yes	Yes
PROFINET IO Device
Services
вЂ” Isochronous mode	No	No	Yes; Bus cycle time: min. 250 µs
вЂ” Open IE communication	Yes	Yes	Yes
вЂ” IRT	Yes; with send cycles of between 250 µs and 4 ms in increments of 125 µs	Yes; with send cycles of between 250 µs and 4 ms in increments of 125 µs	Yes; 250 Ојs, 500 Ојs, 1 ms, 2 ms, 4 ms additionally with IRT with high performance: 250 µs to 4 ms in 125 µs frame
вЂ” MRP	Yes	Yes	Yes
вЂ” MRPD	No	No	No
вЂ” PROFINET system redundancy	No	No	Yes; NAP S2
вЂ” PROFIenergy	Yes	Yes	Yes
вЂ” Prioritized startup	Yes	Yes	Yes
вЂ” Shared device	Yes	Yes	Yes
вЂ” Number of IO Controllers with shared device, max.	2	2	4
Open IE communication
в—Џ TCP/IP	Yes	Yes	Yes
в—Џ SNMP	Yes	Yes	Yes
в—Џ LLDP	Yes	Yes	Yes
Isochronous mode
Isochronous operation (application synchronized up to terminal)	No	No	Yes
Equidistance			Yes
shortest clock pulse			250 µs
max. cycle			4 ms
Bus cycle time (TDP), min.			250 µs
Jitter, max.			1 µs
Interrupts/diagnostics/status information
Status indicator	Yes	Yes	Yes
Alarms	Yes	Yes	Yes
Diagnostic functions	Yes	Yes	Yes
Diagnostics indication LED
в—Џ RUN LED	Yes; Green LED	Yes; Green LED	Yes; Green LED
в—Џ ERROR LED	Yes; Red LED	Yes; Red LED	Yes; Red LED
в—Џ MAINT LED	Yes; yellow LED	Yes; yellow LED	Yes; yellow LED
в—Џ Monitoring of the supply voltage (PWR-LED)	Yes; Green LED	Yes; Green LED	Yes; green PWR LED
в—Џ Connection display LINK TX/RX	Yes; 2x green link LEDs on BusAdapter	Yes; 2x green link LEDs on BusAdapter	Yes; 2x green link LEDs on BusAdapter
Potential separation
between backplane bus and electronics	No	No	No
between PROFINET and all other circuits	Yes	Yes	Yes
between supply and all other circuits	Yes	Yes	Yes
Isolation
Isolation tested with	707 V DC (type test) and according to EN 50155 (routine test)	707 V DC (type test) and according to EN 50155 (routine test)	707 V DC (type test) and according to EN 50155 (routine test)
Standards, approvals, certificates
Network loading class	2	2	3
Security level	According to Security Level 1 Test Cases V1.1.1	According to Security Level 1 Test Cases V1.1.1	According to Security Level 1 Test Cases V1.1.1
Railway application
в—Џ EN 50121-3-2	Yes; EMC for rail vehicles	Yes; EMC for rail vehicles	Yes; EMC for rail vehicles
в—Џ EN 50121-4	Yes; EMC for signal and telecommunications systems	Yes; EMC for signal and telecommunications systems	Yes; EMC for signal and telecommunications systems
в—Џ EN 50124-1	Yes; Railway applications - overvoltage category OV2; pollution degree PD2; rated surge voltage UNi = 0.5 kV; UNm = 24 V DC	Yes; Railway applications - overvoltage category OV2; pollution degree PD2; rated surge voltage UNi = 0.5 kV; UNm = 24 V DC	Yes; Railway applications - overvoltage category OV2; pollution degree PD2; rated surge voltage UNi = 0.5 kV; UNm = 24 V DC
в—Џ EN 50125-1	Yes; Rail vehicles - see ambient conditions	Yes; Rail vehicles - see ambient conditions	Yes; Rail vehicles - see ambient conditions
в—Џ EN 50125-2	Yes; Stationary electrical equipment - see ambient conditions	Yes; Stationary electrical equipment - see ambient conditions	Yes; Stationary electrical equipment - see ambient conditions
в—Џ EN 50125-3	Yes; Signal and telecommunications systems - see ambient conditions; vibrations and shocks: Application point outside of tracks (1 m to 3 m away from track)	Yes; Signal and telecommunications systems - see ambient conditions; vibrations and shocks: Application point outside of tracks (1 m to 3 m away from track)	Yes; Signal and telecommunications systems - see ambient conditions; vibrations and shocks: Application point outside of tracks (1 m to 3 m away from track)
в—Џ EN 50155	Yes; Rail vehicles - temperature class Tx, horizontal mounting position, salt spray Class ST2	Yes; Rail vehicles - temperature class Tx, horizontal mounting position, salt spray Class ST2	Yes; Rail vehicles - temperature class Tx, horizontal mounting position, salt spray Class ST2
в—Џ EN 61373	Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B	Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B	Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B
в—Џ Fire protection acc. to EN 45545-2	Yes; Rail vehicles - verification on request	Yes; Rail vehicles - verification on request	Yes; Rail vehicles - verification on request
Ambient conditions
Ambient temperature during operation
в—Џ horizontal installation, min.	-40 °C; = Tmin	-40 °C; = Tmin	-40 °C; = Tmin; Startup @ -25 °C
в—Џ horizontal installation, max.	70 °C; = Tmax; +85 °C for 10 min (Tx acc. to EN 50155)	70 °C; = Tmax; +85 °C for 10 min (Tx acc. to EN 50155)	60 °C; = Tmax; +70 °C for 10 min (T1 acc. to EN 50155)
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Use on land craft, rail vehicles and special-purpose vehicles
вЂ” to biologically active substances according to EN 60721-3-5	Yes; Class 5B2 mold, fungus and dry rot spores (with the exception of fauna); Class 5B3 on request	Yes; Class 5B2 mold, fungus and dry rot spores (with the exception of fauna); Class 5B3 on request	Yes; Class 5B2 mold, fungus and dry rot spores (with the exception of fauna); Class 5B3 on request
вЂ” to chemically active substances according to EN 60721-3-5	Yes; Class 5C3 (RH < 75%) including salt spray according to EN 50155 (ST2). The supplied plug covers must remain in place over the unused interfaces during operation!	Yes; Class 5C3 (RH < 75%) including salt spray according to EN 50155 (ST2). The supplied plug covers must remain in place over the unused interfaces during operation!	Yes; Class 5C3 (RH < 75%) including salt spray according to EN 50155 (ST2). The supplied plug covers must remain in place over the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-5	Yes; Class 5S3 including sand and dust. The supplied plug covers must remain in place over the unused interfaces during operation!	Yes; Class 5S3 including sand and dust. The supplied plug covers must remain in place over the unused interfaces during operation!	Yes; Class 5S3 including sand and dust. The supplied plug covers must remain in place over the unused interfaces during operation!
Connection method
ET-Connection
в—Џ via BU/BA Send	Yes; + 16 ET 200AL modules	Yes; + 16 ET 200AL modules	Yes; + 16 ET 200AL modules
Dimensions
Width	50 mm	50 mm	50 mm
Height	117 mm	117 mm	117 mm
Depth	74 mm	74 mm	74 mm
Weights
Weight, approx.	191 g; IM155PN ST with BA 2x RJ45 (mounted)	147 g; without BusAdapter	147 g; without BusAdapter
Other
Note:	For use in railway applications, also observe the product information "SIPLUS extreme RAIL" A5E37661960A Online Support article 109736776	For use in railway applications, also observe the product information "SIPLUS extreme RAIL" A5E37661960A Online Support article 109736776	For use in railway applications, also observe the product information "SIPLUS extreme RAIL" A5E37661960A Online Support article 109736776

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания