• 2 24 V channels each with up to 2 A of output current;
  Parallel switching of both channels to boost power up to 4 A of output current
• 1 high-speed 24 V digital input per channel with parameterizable input delay from 4 µs

Suitable BaseUnits

The ET 200SP type B1 BaseUnit is available for connection. The individual signals of the pulse output module are connected to the appropriate terminals.

The type B1 BaseUnit is a dark BaseUnit and forwards the supply voltage of the BaseUnit on the left to its neighbor on the right via self-assembling voltage busbars. The TM Pulse is supplied direct via the infeed terminals of the BaseUnit and is not connected to the neighboring modules.

Shield connection

Due to the high-speed input and output signals, a shielded cable and a low-impedance connection to function ground (DIN rail) are recommended. The BaseUnit of type B1 does NOT offer an integrated connection to the DIN rail. Users must ensure correct shielding themselves. Please observe the information in the manual.

Accessories (not included in the scope of supply of the module)

• Labeling strips
• Equipment labeling plates