TM Timer DIDQ 10x24V time-based IO module . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на TM Timer DIDQ 10x24V time-based IO module

| | | | | | |

Article number		6ES7138-6CG00-0BA0
		ET 200SP, TM TIMER DIDQ 10X24V
General information
Product type designation		TM Timer DIDQ 10x24V
usable BaseUnits		BU type A0
Product function
в—Џ I&M data		Yes; I&M 0
Engineering with
в—Џ STEP 7 TIA Portal configurable/integrated as of version		V13 Update 3
в—Џ STEP 7 configurable/integrated as of version		V5.5 SP3 / -
Supply voltage
Load voltage L+
в—Џ Rated value (DC)		24 V
в—Џ permissible range, lower limit (DC)		19.2 V
в—Џ permissible range, upper limit (DC)		28.8 V
в—Џ Reverse polarity protection		Yes; against destruction
Input current
Current consumption, max.		50 mA; without load
Encoder supply
Number of outputs		1
24 V encoder supply
в—Џ 24 V		Yes; L+ (-0.8 V)
в—Џ Short-circuit protection		Yes
в—Џ Output current, max.		500 mA; Observe derating
Power loss
Power loss, typ.		1.5 W
Address area
Occupied address area
в—Џ Inputs		26 byte
в—Џ Outputs		32 byte
Digital inputs
Number of digital inputs		4
Digital inputs, parameterizable		Yes
Input characteristic curve in accordance with IEC 61131, type 3		Yes
Digital input functions, parameterizable
в—Џ Digital input with time stamp		Yes
вЂ” Number, max.		4
в—Џ Counter		Yes
вЂ” Number, max.		3
в—Џ Counter for incremental encoder		Yes
вЂ” Number, max.		1
в—Џ Digital input with oversampling		Yes
вЂ” Number, max.		4
в—Џ HW enable for digital input		Yes
вЂ” Number, max.		1
в—Џ HW enable for digital output		Yes
вЂ” Number, max.		3
Input voltage
в—Џ Type of input voltage		DC
в—Џ Rated value (DC)		24 V
в—Џ for signal "0"		-30 to +5V
в—Џ for signal "1"		+11 to +30V
в—Џ permissible voltage at input, min.		-30 V
в—Џ permissible voltage at input, max.		30 V
Input current
в—Џ for signal "1", typ.		2.5 mA
Input delay (for rated value of input voltage)
в—Џ Minimum pulse width for program reactions		3 µs for parameterization "none"
for standard inputs
вЂ” parameterizable		Yes; none / 0.05 / 0.1 / 0.4 / 0.8 ms
вЂ” at "0" to "1", min.		4 µs
вЂ” at "1" to "0", min.		4 µs
Cable length
в—Џ shielded, max.		1 000 m; Depending on sensor, cable quality and rate of change
в—Џ unshielded, max.		600 m; Depending on sensor, cable quality and rate of change
Digital outputs
Type of digital output		Transistor
Number of digital outputs		6
Current-sinking		Yes; With High Speed output
Current-sourcing		Yes
Digital outputs, parameterizable		Yes
Short-circuit protection		Yes; electronic/thermal
в—Џ Response threshold, typ.		1.7 A with Standard output, 0.5 A with High Speed output
Limitation of inductive shutdown voltage to		-0.8 V
Digital output functions, parameterizable
в—Џ Digital output with time stamp		Yes
вЂ” Number, max.		6
в—Џ PWM output		Yes
вЂ” Number, max.		6
в—Џ Digital output with oversampling		Yes
вЂ” Number, max.		6
Switching capacity of the outputs
в—Џ with resistive load, max.		0.5 A; 0.1 A with High Speed output
в—Џ on lamp load, max.		5 W; 1 W with High Speed output
Load resistance range
в—Џ lower limit		48 в„¦; 240 ohm with High Speed output
в—Џ upper limit		12 kв„¦
Output voltage
в—Џ Type of output voltage		DC
в—Џ for signal "0", max.		1 V; With High Speed output
в—Џ for signal "1", min.		23.2 V; L+ (-0.8 V)
Output current
в—Џ for signal "1" rated value		0.5 A; 0.1 A with High Speed output, observe derating
в—Џ for signal "1" permissible range, max.		0.6 A; 0.12 A with High Speed output, observe derating
в—Џ for signal "1" minimum load current		2 mA
в—Џ for signal "0" residual current, max.		0.5 mA
Output delay with resistive load
в—Џ "0" to "1", max.		1 µs; With High Speed output, 5 µs with Standard output
в—Џ "1" to "0", max.		1 µs; With High Speed output, 6 µs with Standard output
Switching frequency
в—Џ with resistive load, max.		10 kHz
в—Џ on lamp load, max.		10 Hz
Total current of the outputs
в—Џ Current per module, max.		3.5 A; Observe derating
Cable length
в—Џ shielded, max.		1 000 m; Depending on load and cable quality
в—Џ unshielded, max.		600 m; Depending on load and cable quality
Encoder
Connectable encoders
в—Џ Incremental encoder (asymmetrical)		Yes
в—Џ 24 V initiator		Yes
в—Џ 2-wire sensor		Yes
вЂ” permissible quiescent current (2-wire sensor), max.		1.5 mA
Encoder signals, incremental encoder (asymmetrical)
в—Џ Input voltage		24 V
в—Џ Input frequency, max.		50 kHz
в—Џ Counting frequency, max.		200 kHz; with quadruple evaluation
в—Џ Cable length, shielded, max.		600 m; Depending on input frequency, encoder and cable quality; max. 200 m at 50 kHz
в—Џ Incremental encoder with A/B tracks, 90° phase offset		Yes
в—Џ Pulse encoder		Yes
Encoder signal 24 V
вЂ” permissible voltage at input, min.		-30 V
вЂ” permissible voltage at input, max.		30 V
Interface types
в—Џ Input characteristic curve in accordance with IEC 61131, type 3		Yes
Isochronous mode
Isochronous operation (application synchronized up to terminal)		Yes
Bus cycle time (TDP), min.		375 µs
Jitter, max.		1 µs
Interrupts/diagnostics/status information
Diagnostics function		Yes
Substitute values connectable		Yes
Alarms
в—Џ Diagnostic alarm		Yes
Diagnostic messages
в—Џ Monitoring the supply voltage		Yes
в—Џ Short-circuit		Yes
Diagnostics indication LED
в—Џ Monitoring of the supply voltage (PWR-LED)		Yes; green PWR LED
в—Џ Channel status display		Yes
в—Џ for module diagnostics		Yes; green/red DIAG LED
Integrated Functions
Number of counters		3
Counting frequency (counter) max.		200 kHz; with quadruple evaluation
Counting functions
в—Џ Continuous counting		Yes
Potential separation
Potential separation channels
в—Џ between the channels and backplane bus		Yes
Isolation
Isolation tested with		707 V DC (type test)
Ambient conditions
Ambient temperature during operation
в—Џ horizontal installation, min.		0 °C
в—Џ horizontal installation, max.		60 °C; Observe derating
в—Џ vertical installation, min.		0 °C
в—Џ vertical installation, max.		50 °C; Observe derating
Decentralized operation
to SIMATIC S7-1500		Yes
Dimensions
Width		15 mm
Height		73 mm
Depth		58 mm
Weights
Weight, approx.		45 g

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания