Time-based IO module TM Timer DIDQ 10x24V . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на Time-based IO module TM Timer DIDQ 10x24V

| | | | | | |

Time-based IO module TM Timer DIDQ 10x24V

Article number		6ES7138-6CG00-0BA0
		ET 200SP, TM TIMER DIDQ 10X24V
General information
Product type designation		TM Timer DIDQ 10x24V
Product function
? I&M data		Yes; I&M 0
Engineering with
? STEP 7 TIA Portal configurable/integrated as of version		V13 Update 3
? STEP 7 configurable/integrated as of version		V5.5 SP3 / -
Supply voltage
Load voltage L+
? Rated value (DC)		24 V
? Reverse polarity protection		Yes; against destruction
Input current
Current consumption, max.		50 mA; without load
Encoder supply
Number of outputs		1
24 V encoder supply
? 24 V		Yes; L+ (-0.8 V)
? Short-circuit protection		Yes
? Output current, max.		500 mA; Observe derating
Power loss
Power loss, typ.		1.5 W
Digital inputs
Number of digital inputs		4
Digital inputs, parameterizable		Yes
Input characteristic curve in accordance with IEC 61131, type 3		Yes
Digital input functions, parameterizable
? Digital input with time stamp		Yes
— Number, max.		4
? Counter		Yes
— Number, max.		3
? Counter for incremental encoder		Yes
— Number, max.		1
? Digital input with oversampling		Yes
— Number, max.		4
? HW enable for digital input		Yes
— Number, max.		1
? HW enable for digital output		Yes
— Number, max.		3
Input voltage
? Type of input voltage		DC
? Rated value (DC)		24 V
? for signal "0"		-30 to +5V
? for signal "1"		+11 to +30V
? permissible voltage at input, min.		-30 V
? permissible voltage at input, max.		30 V
Input current
? for signal "1", typ.		2.5 mA
Input delay (for rated value of input voltage)
? Minimum pulse width for program reactions		3 µs for parameterization "none"
for standard inputs
— parameterizable		Yes; none / 0.05 / 0.1 / 0.4 / 0.8 ms
— at "0" to "1", min.		4 µs
— at "1" to "0", min.		4 µs
Cable length
? shielded, max.		1 000 m; Depending on sensor, cable quality and rate of change
? unshielded, max.		600 m; Depending on sensor, cable quality and rate of change
Digital outputs
Type of digital output		Transistor
Number of digital outputs		6
Current-sinking		Yes; With High Speed output
Current-sourcing		Yes
Digital outputs, parameterizable		Yes
Short-circuit protection		Yes; electronic/thermal
Limitation of inductive shutdown voltage to		-0.8 V
Digital output functions, parameterizable
? Digital output with time stamp		Yes
— Number, max.		6
? PWM output		Yes
— Number, max.		6
? Digital output with oversampling		Yes
— Number, max.		6
Switching capacity of the outputs
? with resistive load, max.		0.5 A; 0.1 A with High Speed output
? on lamp load, max.		5 W; 1 W with High Speed output
Load resistance range
? lower limit		48 ?; 240 ohm with High Speed output
? upper limit		12 k?
Output voltage
? Type of output voltage		DC
? for signal "0", max.		1 V; With High Speed output
? for signal "1", min.		23.2 V; L+ (-0.8 V)
Output current
? for signal "1" rated value		0.5 A; 0.1 A with High Speed output, observe derating
? for signal "0" residual current, max.		0.5 mA
Output delay with resistive load
? "0" to "1", max.		1 µs; With High Speed output, 5 µs with Standard output
? "1" to "0", max.		1 µs; With High Speed output, 6 µs with Standard output
Switching frequency
? with resistive load, max.		10 kHz
? on lamp load, max.		10 Hz
Total current of the outputs
? Current per module, max.		3.5 A; Observe derating
Cable length
? shielded, max.		1 000 m; Depending on load and cable quality
? unshielded, max.		600 m; Depending on load and cable quality
Encoder
Connectable encoders
? Incremental encoder (asymmetrical)		Yes
? 24 V initiator		Yes
? 2-wire sensor		Yes
— permissible quiescent current (2-wire sensor), max.		1.5 mA
Encoder signals, incremental encoder (asymmetrical)
? Input voltage		24 V
? Input frequency, max.		50 kHz
? Counting frequency, max.		200 kHz; with quadruple evaluation
? Cable length, shielded, max.		600 m; Depending on input frequency, encoder and cable quality; max. 200 m at 50 kHz
? Incremental encoder with A/B tracks, 90° phase offset		Yes
? Pulse encoder		Yes
Encoder signal 24 V
— permissible voltage at input, min.		-30 V
— permissible voltage at input, max.		30 V
Interface types
? Input characteristic curve in accordance with IEC 61131, type 3		Yes
Isochronous mode
Isochronous operation (application synchronized up to terminal)		Yes
Bus cycle time (TDP), min.		375 µs
Interrupts/diagnostics/status information
Diagnostics function		Yes
Substitute values connectable		Yes
Alarms
? Diagnostic alarm		Yes
Diagnostic messages
? Monitoring the supply voltage		Yes
? Short-circuit		Yes
Diagnostics indication LED
? Monitoring of the supply voltage (PWR-LED)		Yes; green PWR LED
? Channel status display		Yes
? for module diagnostics		Yes; green/red DIAG LED
Integrated Functions
Number of counters		3
Counting frequency (counter) max.		200 kHz; with quadruple evaluation
Counting functions
? Continuous counting		Yes
Potential separation
Potential separation channels
? between the channels and backplane bus		Yes
Isolation
Isolation tested with		707 V DC (type test)
Ambient conditions
Ambient temperature during operation
? horizontal installation, min.		0 °C
? horizontal installation, max.		60 °C; Observe derating
? vertical installation, min.		0 °C
? vertical installation, max.		50 °C; Observe derating
Decentralized operation
to SIMATIC S7-1500		Yes
Dimensions
Width		15 mm
Height		73 mm
Depth		58 mm
Weights
Weight, approx.		45 g

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания