|
| | | | | |
- Connection box compact
The connection box compact is intended for control cabinet installation. All connectors and contacts for the wiring are arranged on the rear so that all the wiring takes place in the cabinet. The evaluation of the safety operating elements can be performed not only via the PROFIsafe software protocol in connection with an F-PLC, but also via hard-wiring. In the case of hard-wiring, the use of safety inputs (e.g. SIMATIC ET 200SP) or safety relays (SIRIUS 3SK3) is necessary. When the Mobile Panel is withdrawn**, the emergency stop circuit is open. - Connection box standard
The connection box standard is designed for installation in a control cabinet or for wall mounting. The internal 3-port switch offers the option of integrating the connection box into a linear network. The evaluation of the safety operating elements can be performed not only via the PROFIsafe software protocol in connection with an F-PLC, but also via hard-wiring. In the case of hard-wiring, the use of safety inputs (e.g. SIMATIC ET 200SP) or safety relays (SIRIUS 3SK3) is necessary. When the Mobile Panel is withdrawn**, the emergency stop circuit is open. - Connection box advanced
The connection box advanced has the same enclosure. The function is based on the standard version with several extensions: When the Mobile Panel is withdrawn**, the emergency stop circuit is open. This enables the machine to carry on working when the device is not connected. The internal switch supports MRP and IRT.
|
|
