|
| | | | | | | |
- Reliable shutdown in case of overload regardless of cable lengths or cable cross-sections
- 4 load feeders per module with individually adjustable response threshold from 0.5 – 3 A or 3 – 10 A for each output
- Voltage measuring points for output currents (1 V = 1 A), disconnection of load circuit is not required
- Two versions for remote diagnostics: Group signaling contact or single-channel signaling
- Versions with power limitation of the outputs to 100 VA according to NEC Class 2
- Evaluation via free-of-charge SIMATIC S7 or SIMOTION function blocks (S7-1500/1200/300/400) or via LOGO! Software for modules with single-channel signaling (PSE200U)
- Simple configuration thanks to individual setting of maximum current for every output using potentiometers
- 3-color LEDs for fast on-site fault localization
- Remote reset possible from a central location (PSE200U)
- Simple commissioning thanks to manual switch on/off of outputs (PSE200U)
- Sequential connection of feeders to reduce total inrush current
- Sealable transparent cover over adjusters for currents and times protects against maladjustment (PSE200U)
- Library for visualization in SIMATIC PCS 7
|
|
