SITRANS LH100, transmitter for hydrostatic level . Технические данные. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SITRANS LH100, transmitter for hydrostatic level

| | | | | | | | | | |

Pressure transmitter SITRANS LH100 (submersible sensor)
Mode of operation
Measuring principle	Piezo-resistive
Input
Measured variable	Hydrostatic level
Measuring range	Max. permissible operating pressure
0 ... 3 mH₂O (0 ... 9 ftH₂O)	1.5 bar (21.8 psi) (corresponds to 15 mH₂O (45 ftH₂O))
0 ... 4 mH₂O (0 ... 12 ftH₂O)	1.5 bar (21.8 psi) (corresponds to 15 mH₂O (45 ftH₂O))
0 ... 5 mH₂O (0 ... 15 ftH₂O)	1.5 bar (21.8 psi) (corresponds to 15 mH₂O (45 ftH₂O))
0 ... 6 mH₂O (0 ... 18 ftH₂O)	1.5 bar (21.8 psi) (corresponds to 15 mH₂O (45 ftH₂O))
0 ... 10 mH₂O (0 ... 30 ftH₂O)	3.0 bar (43.5 psi) (corresponds to 30 mH2O (90 ftH2O))
0 ... 20 mH₂O (0 ... 60 ftH₂O)	5.0 bar (72.5 psi) (corresponds to 50 mH₂O (150 ftH₂O))
0 ... 0.3 bar	1.5 bar
0 ... 0.4 bar	1.5 bar
0 ... 0.5 bar	1.5 bar
0 ... 0.6 bar	1.5 bar
0 ... 1 bar	3.0 bar
0 ... 2 bar	5.0 bar
Output
Output signal	4 ... 20 mA
Measuring accuracy	According to IEC 60770-1
Error in measurement at limit setting including hysteresis and reproducibility
Measuring range
0 ... 3 mH₂O (0 ... 9 ftH₂O or 0 ... 0.3 bar)	0.5% of full-scale value (typical) 1.0% of full-scale value (maximum)
for all other measuring ranges	0.3% of full-scale value (typical) 0.6% of full-scale value (maximum)
Effect of ambient temperature
Measuring range	Zero and span
3 mH₂O (9 ftH₂O or 0.3 bar)	0.45 %/10 K of full-scale value
4 ... 6 mH₂O (12 ... 18 ftH₂O or 0.4вЂ¦0.6 bar)	0.45 %/10 K of full-scale value
> 6 mH₂O ( > 18 ftH₂O or > 0.6 bar)	0.3 %/10 K of full-scale value
Long-term stability
Measuring range	Zero and span
3 mH₂O (9 ftH₂O or 0.3 bar)	0.4% of full-scale value/year
4 ... 6 mH₂O (12 ... 18 ftH₂O or 0.4вЂ¦0.6 bar)	0.25% of full-scale value/year
> 6 mH₂O ( > 18 ftH₂O or > 0.6 bar)	0.2 % of full-scale value/year
Rated conditions
Ambient conditions
Process temperature	-10 ... +80 °C (14 ... 176 °F)
Storage temperature	-40 ... +80 °C (-40 ... +176 °F)
Degree of protection according to IEC 60529	IP68
Design
Weight
Pressure transmitter	в‰€ 0.2 kg ( в‰€ 0.44 lb)
Cable; maximum cable length 100 m (330 ft)	0.025 kg/m (в‰€ 0.015 lb/ft)
Electrical connection	Cable with 3 conductors, vent pipe and integrated humidity filter
Material
Seal diaphragm	Al₂O₃ ceramic, 96%
Enclosure	Stainless steel, mat. no. 1.4404/316L
Gasket	FPM (standard) EPDM (optional)
Connecting cable	PE-HD (standard) PE-LD (in the case of versions with EPDM seal, suitable for drinking water applications)
Auxiliary power
Terminal voltage on pressure transmitter U_B	10 ... 33 V DC 10 ... 30 V DC for transmitter with intrinsic safety explosion protection
Certificates and approvals
Drinking water approval (ACS)	Applied for
Drinking water approval (WRAS)	1403525
EAC	в„– TC RU C-DE.Р“Р‘05.Р’.00732 OC РќРђРќРРћ «Р¦РЎР’Р»
Underwriters Laboratories (UL)	2014-11-17 - E344532
The device is not subject to the pressure equipment directive (PED 2014/68/EU)
Explosion protection
Intrinsic safety "i"	IECEx SEV 14.0003 SEV 14 ATEX 0109
Marking	II 1 G Ex ia IIC T4 Ga

Junction box
Application	For connecting the transmitter cable
Design
Weight	0.2 kg (0.44 lb)
Electrical connection	2 x 3-way (28 to 18 AWG)
Cable entry	2 x Pg 9
Enclosure material	polycarbonate
Vent pipe for atmospheric pressure
Rated conditions
Degree of protection according to IEC 60529	IP65

Cable hanger
Application	For mounting the transmitter
Design
Weight	0.16 kg (0.35 lb)
Material	Galvanized steel, polyamide