Power range

230 V 1 AC: 0.12 ... 3.0 kW (0.16 ... 4 hp)
400 V 3 AC: 0.37 ... 30.0 kW (0.5 ... 40 hp)

Offset factor cos П†

≥ 0.95

Power factor О»

0.72

Line voltage

230 V 1 AC: 200 V ... 240 V 1 AC (-10 % ... +10 %) ¹⁾
400 V 3 AC: 380 V ... 480 V 3 AC (-15 % ... +10 %)

Maximum output voltage

100 % of input voltage

Line frequency

50 Hz/60 Hz

Line supply type

• TN, TT, TT earthed line
• IT for
  • 230 V 1 AC unfiltered devices, frame sizes FSAA/FSAB
  • 400 V 3 AC unfiltered devices

Overload capability

• Up to 15 kW

High overload (HO):
150 % I_H for 60 s for a cycle time of 300 s

• From 18.5 kW

Low overload (LO):
110 % I_L for 60 s for a cycle time of 300 s

High overload (HO):
110 % I_H for 60 s for a cycle time of 300 s

Output frequency

0 ... 550 Hz, resolution: 0.01 Hz

Pulse frequency

2 ... 16 kHz

Efficiency

98 %

Programmable fixed frequency setpoints

16

Analog inputs

AI1: bipolar current/voltage mode
AI2: unipolar current/voltage mode
Can be used as digital inputs

• Resolution

12 bit

Analog output

AO1 current output
0 ... 20 mA

Digital inputs

DI1 вЂ¦ DI4: optically isolated
PNP/NPN selectable by terminal

• Input current, max.

15 mA

Digital outputs

DO1: transistor output
DO2: relay output
250 V AC 0.5 A with resistive load
30 V DC 0.5 A with resistive load

Integrated interface

• Type

RS485

• Protocols

USS, Modbus RTU

Extension interface

BOP interface module, parameter loader

Control modes

• V/f linear/square/multi-point

вњ“ 

• V/f with flux current control (FCC)

вњ“ 

Functions

Easy to use

Automatic restart

вњ“ 

Parameter cloning

вњ“ 

Drive data sets (DDS)

вњ“ (3)

Command data sets (CDS)

вњ“ (3)

JOG

вњ“ 

Pre-configured connection macros and application macros

вњ“ 

Simple parameter-based menu on internal and external BOPs

вњ“ 

Simple text menu for setup

вњ“ 

USS

вњ“ 

Modbus RTU

вњ“ 

Motor frequency display scaling

вњ“ 

Customization of parameter defaults

вњ“ 

Energy consumption monitoring

вњ“ 

List of modified parameters

вњ“ 

Converter status at fault

вњ“ 

Application

Keep running mode

вњ“ 

Flying restart

вњ“ 

PID controller

вњ“ 

Kinetic buffering (V_dcmin controller)

вњ“ 

Skippable frequency bandwidth

4

Braking functions

• DC braking

вњ“ 

• Compound braking

вњ“ 

• Dynamic braking

вњ“ 

2-wire/3-wire control

вњ“ 

Mechanical hold braking control

вњ“ 

Super torque mode

вњ“ 

Hammer start mode

вњ“ 

Blockage clearing mode

вњ“ 

Hibernation mode

вњ“ 

Motor staging

вњ“ 

Dual ramp

вњ“ 

Wobble function

вњ“ 

BICO function

вњ“ 

Slip compensation

вњ“ 

Protection

DC-link voltage control

вњ“ 

Belt failure detection

вњ“ 

Phase loss detection

вњ“ 

Cavitation protection

вњ“ 

Condensation protection

вњ“ 

Frost protection

вњ“ 

Control

ECO mode

вњ“ 

V_dcmax controller

вњ“ 

I_max controller

вњ“ 

Programmable V/f coordinates

вњ“ 

Flexible boost control

вњ“ 

50/60 Hz customization

вњ“ 

Degree of protection

IP20

Mounting

Wall-mounting, side-by-side mounting, push-through mounting for FSB, FSC, FSD and FSE

Ambient temperature

• Operation

-10 ... 40 °C (14 ... 104 °F) without derating
40 ... 60 °C (104 ... 140 °F) with derating

• Storage

-40 ... +70 °C (-40 ... +158 °F)

Relative humidity

95 % (non-condensing)

Cooling

• FSAA, FSAB, FSA up to 0.75 kW

Convection cooling

• FSA, FSB, FSC, FSD, FSE

Power electronics cooled using heat sinks with external fan

Installation altitude

Up to 4000 m above sea level
1000 ... 4000 m: output current derating
2000 ... 4000 m: input voltage derating

Motor cable length

• Unshielded cable

• FSAA to FSD

50 m

• FSE

100 m

• Shielded cable

• FSA

10 m for converters FSA with integrated line filter category C3;
to achieve 25 m shielded motor cable length also with FSA, unfiltered converters with external line filter have to be used.

• FSAA to FSD

25 m

• FSE

50 m

• Longer motor cables with an additional output reactor

• 230 V 1 AC

Shielded and unshielded cable: 200 m

• 400 V 3 AC

Shielded and unshielded cable: 150 m for FSA to FSD
Shielded cable: 200 m for FSE
Unshielded cable: 300 m for FSE

Vibratory load

• Transport

5 ... 9 Hz: 3.5 mm deflection
9 ... 200 Hz: 1 g vibration
Vibration class: 2M3 transportation

• Operation

Operational area IIa
10 ... 58 Hz: 0.075 mm deflection
58 ... 200 Hz: 1 g vibration

Shock load

• Operation

Operational area II
Peak acceleration: 5 g
Duration of shock: 30 ms

Dimensions depending on frame size FS

FSAA
without fan

FSAB
without fan

FSA
without fan

FSA
with 1 fan

FSB
with 1 fan

FSC
with 1 fan

FSD
with 2 fans

FSE
with 2 fans

• Width in mm (in)

68 (2.68)

68 (2.68)

90 (3.54)

90 (3.54)

140 (5.52)

184 (7.24)

240 (9.45)

245 (9.65)

• Height in mm (in)

142 (5.59)

142 (5.59)

150 (5.91)

166 (6.54)

160 (6.3)

182 (7.17)

206.5 (8.13)

264.5 (10.41)

• Depth in mm (in)

107.8 (4.24)

127.8 (5.03)

145.5 (5.73)

145.5 (5.73)

164.5 (6.48)

169 (6.65)

172.5 (6.79)

209 (8.23)

Weight, approx.

FSAA
without fan

FSAB
without fan

FSA
without fan

FSA
with 1 fan

FSB
with 1 fan

FSC
with 1 fan

FSD
with 2 fans

FSE
with 2 fans

• 230 V 1 AC

• Without integrated line filter

0.6 kg

0.8 kg

–

–

1.6 kg

2.5 kg

–

–

• With integrated line filter category C1

0.7 kg

0.9 kg

–

–

–

–

–

–

• With integrated line filter category C2

–

–

–

–

1.8 kg

2.8 kg

–

–

• 400 V 3 AC

• Without integrated line filter

–

–

0.9 kg

1.0 kg

1.6 kg

2.4 kg

3.9 kg

6.4 kg

• With integrated line filter category C3

–

–

1.0 kg

1.1 kg

1.8 kg

2.6 kg

4.3 kg

7.0 kg

Mounting clearance, minimum

• Top

100 mm (3.94 in)

• Bottom

100 mm (3.94 in)
85 mm (3.35 in) for fan-cooled FSA

• Side

0 mm (0 in)

Compliance with standards

cULus, CE, RCM, KC

Environmental classes

Pollution class: 3S2
Gas class: 3C2 (SO₂, H₂S)
Climate class: 3K3

CE marking, according to

European Low Voltage Directive (EN 61800‑5‑1 /EN 60204-1) and European EMC Directive (EN 61800‑3)

UL marking, according to

UL508C

EMC standards, radiated emissions and disturbance voltage (conducted emissions)

• EN 61800‑3 category C1, 1^st environment (residential, commercial)

230 V 1 AC, FSAA and FSAB with integrated line filter, or unfiltered with external line filter, shielded cables ≤ 5 m

• EN 61800‑3 category C2, 1^st environment (residential, commercial)

• 230 V 1 AC, FSB and FSC with integrated line filter, shielded cables ≤ 25 m
• 400 V 3 AC without integrated line filter with external line filter,
  shielded cables FSA ^*) to FSE ≤ 25 m

• EN 61800‑3 category C3, 2^nd environment (industrial)

• 400 V 3 AC with integrated line filter,
  shielded cables FSA ≤ 10 m, FSB to FSD ≤ 25 m, FSE ≤ 50 m

Note

The EMC product standard EN 61800‑3 does not directly refer to a frequency converter, but to a PDS (Power Drive System), that covers beside the converter the whole circuiting as well as the motor and cables. The converters themselves are in general not subject to marking in accordance with the EMC directive.