Options |
1 | SINAMICS V20 BOP | Same function as the integrated BOP (Basic Operator Panel), but can be used for remote mounting. The value and setpoint are changed by rotating the wheel.
For remote mounting with IP54 and UL Type 1 enclosure protection level. |
2 | BOP interface | Connection between converter and BOP
RJ45 interface is compatible with standard LAN cable. |
3 | BOP cable | The cable is not included in the delivery.
You can use any standard LAN cable with standard RJ45 connector. |
4 | Parameter loader | Up to 100 parameter sets with parameter settings can be written from the memory card to the converter or saved from the converter to the memory card without connecting the converter to the line supply. |
5 | SINAMICS SD card | Memory card, 512 MB
(Standard SD cards up to 32 GB are supported) |
6 | Line filter | - Improved EMC performance
- Longer motor cable for frame size FSA
|
7 | Line reactor | - Reduces the harmonic current
- Improves the power factor
- Recommended if input current (RMS value) is higher than the rated current of the converter
|
8 | Braking module | - Shortens the deceleration ramp time
- Suitable for 230 V 1 AC and 400 V 3AC
- Adjustable duty cycle from 5 % to 100 %
- FSD and FSE already have an integrated braking unit
|
9 | Braking resistor | - Dissipates regenerative energy as heat
- 5 % duty cycle as default setting
|
10 | Output reactor | Longer motor cable: - 400 V 3 AC shielded and unshielded cable:
- 150 m for FSA to FSD
- 200 m (shielded)/300 m (unshielded) for FSE
- 230 V 1 AC shielded and unshielded cable: 200 m
|
11 | Shield connection kit | - Shield connection
- Strain relief
|
12 | Standard fuse | Recommended fuse corresponding to the IEC/UL standard |
13 | Circuit breaker | Recommended circuit breaker corresponding to the IEC/UL standard |
