SINAMICS V20 converters, frame sizes FSAA, FSAB, FSA, FSB, FSC, FSD and FSE

SINAMICS V20 – The cost-effective, reliable and easy-to-use converter for basic applications

Today, in an increasing number of applications in plant and machinery construction, individual automation and drive solutions are demanded that automate simple motion sequences with low associated requirements.

With its compact SINAMICS V20, the basic performance converter, Siemens offers a simple and cost-effective drive solution for these types of applications. SINAMICS V20 sets itself apart with its quick commissioning times, ease of operation, robustness and cost-efficiency.

With seven frame sizes, it covers a power range extending from 0.12 kW up to 30 kW (0.16 hp up to 40 hp).

Minimize your costs

Engineering, commissioning and operating costs as well as those in operation must be kept as low as possible. You have precisely the right answer with our SINAMICS V20. To increase energy efficiency, the converter is equipped with a control technique to achieve optimum energy efficiency through automatic flux reduction. Not only this, it displays the actual energy consumption and has additional, integrated energy-saving functions. This allows energy consumption to be slashed drastically.

Selection and ordering data

¹⁾ The rated power of the 230 V 1 AC devices is based on the output current I_H .The output current I_H is based on the duty cycle for high overload (HO): 150 % I_H for 60 s with a cycle time of 300 s.

²⁾ The output current I_H is based on the duty cycle for high overload (HO): 150 % I_H for 60 s with a cycle time of 300 s.

³⁾ EN 61800-3 category C1, 1^st environment (residential, commercial). Shielded motor cable length for FSAA and FSAB max. 5 m, with or without external line filter.

⁴⁾ Single-phase devices can also be connected to two phases of a 3-phase 230 V supply system. You can find detailed information here:     http://support.industry.siemens.com/cs/document/109476260

¹⁾ The rated power of the 230 V 1 AC devices is based on the output current I_H .The output current I_H is based on the duty cycle for high overload (HO): 150 % I_H for 60 s with a cycle time of 300 s.

²⁾ The output current I_H is based on the duty cycle for high overload (HO): 150 % I_H for 60 s with a cycle time of 300 s.

³⁾ EN 61800-3 category C2, 1^st environment (residential, commercial). Shielded motor cable length for FSB to FSC max. 25 m.

⁴⁾ Single-phase devices can also be connected to two phases of a 3-phase 230 V supply system. You can find detailed information here:     http://support.industry.siemens.com/cs/document/109476260

¹⁾ The rated power of the 400 V 3 AC devices is based on the output current I_L .The output current I_L is based on the duty cycle for low overload (LO): 110 % I_L for 60 s with a cycle time of 300 s.

²⁾ The output current I_L is based on the duty cycle for low overload (LO): 110 % I_L for 60 s with a cycle time of 300 s.

³⁾ The output current I_H is based on the duty cycle for high overload (HO): 150 % I_H for 60 s with a cycle time of 300 s.

⁴⁾ EN 61800-3 category C3, 2^nd environment (industry). Shielded motor cable length for FSA max. 10 m, for FSB to FSD max. 25 m, and for FSE max. 50 m. To reach category C2 or to achieve 25 m shielded motor cable length also with FSA, unfiltered converters with external line filter have to be used.