The following functions are available:

• Mass flowrate, volume flowrate, density, process temperature, frame temperature, fraction flow
• Up to four output/input channels selected at ordering
• Outputs can be individually configured with mass, volume, density etc.
• Three built-in totalizers which can count forward, backward or forward and backward
• Low flow cut-off, adjustable Density cut-off or empty pipe cut-off, adjustable
• Flow direction adjustable
• Alarm system consisting of alarm-log, alarm pending menu
• Internal data logger is updated each 10 minutes with operational data such as system health, totalizer values, all configurations and data needed for custody transfer requirements to OIML R 117 and NTEP
• Display of operating time with real-time clock. Daylight saving time is not implemented
• Uni/bidirectional flow measurement
• Flowrate outputs are freely configurable between maximum negative and maximum positive flows according to the sensor capacity
• Limit switches programmable for flow, density, temperature or fraction process values. Limit points can be graded as warning and alarm for values both above and below nominal process conditions
• Process noise filter for optimization of measurement performance under non-ideal application conditions. 5-stage pumping filter compensates for flow fluctuations caused by e.g. single acting piston pumps
• Full dosing controller with 5 user-configurable recipes
• Automatic zero adjustment menu, with zero point evaluation display
• Full service menu for effective and straight forward application and meter troubleshooting
• Precise temperature measurement ensures optimum accuracy on massflow, density and fraction flow.
• Fraction flow computation is based on a 5th-order algorithm matching known applications. All standard fraction calculations fit within 0.1% of the true value.
• Audit trail information, stores parameters changes with time stamp information
• Simulation of process values, status information and alarms
• Aerated flow filtering system, for advanced filtering of fluids with gas or air bubbles
• Datalogging of process values and parameter changes on SensorFlash