The transmitter SITRANS FCT030 is designed in an IP67/NEMA 4X aluminum enclosure with corrosion resistant coating. It can be remote connected or compact mounted with an sensor

• FCS400 DN 15, DN 25, DN 50, DN 80, DN 100 and DN 150,
• MASS 2000 DI 1.5, DI 3, DI 6, DI 15 and
• FC300 DN 4.

FCT030 is available with current output HART 7.5, Modbus RS485 RTU, PROFIBUS DP or PROFIBUS PA as standard on Channel 1.

The transmitter has a modular design with discrete, replaceable electronic modules and connection boards to maintain separation between functions and facilitate field service. All modules are fully traceable and their provenance is included in the transmitter setup.

SensorFlash

SensorFlash is a standard, 1 GByte micro SD card with the ability to be updated by PC. It is supplied with each sensor with the complete set of certification documents including calibration report. Material, pressure test, factory conformance certificates are optional at ordering.

The Siemens SensorFlash memory unit offers the following features and benefits:

• Automatically program any similar transmitter in seconds to the operation standard
• Transmitter replacement in less than 5 minutes
• True "plug & play" provided by integrated cross-checking data consistency and HW/SW version verification
• Permanent memory of operational and functional information from the moment that the flowmeter is switched on
• New firmware updates can be downloaded from the SIEMENS internet portal for Product Support and placed onto Sensor-Flash (unmounted from the transmitter and inserted into a PC’s SD card slot). The firmware is then inserted into the existing flowmeter and the complete system upgraded.
• Storing of alarm history log
• Storing of parameter change log
• Storing of process peak values log

Dataloggin on SensorFlash

The following functions are available:

• Logging of process values
• Logging of parameter settings
• Selectable logging interval