Digital output modules . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на Digital output modules

| | | | | | |

Article number	6ES7132-6BH00-0BA0	6ES7132-6BF60-0AA0	6ES7132-6BF00-0AA0	6ES7132-6BF00-0BA0	6ES7132-6BF00-0CA0
	ET 200SP, DQ 16X24VDC/0,5A ST	ET 200SP, DQ 8X24VDC/0,5A SINK BASIC	ET 200SP, DQ 8X24VDC/0,5A BASIC, PU 1	ET 200SP, DQ 8X24VDC/0,5A ST	ET 200SP, DQ 8X24VDC/0,5A HF
General information
Product type designation	DQ 16x24 VDC/0.5 A ST	DQ 8x24VDC/0.5A SNK BA	DQ 8x24 VDC/0.5 A BA	DQ 8x24 VDC/0.5 A ST	DQ 8x24 V DC/0.5 A HF
Firmware version	V1.0	V1.0	V1.0	V1.1	V2.0
в—Џ FW update possible	Yes	Yes	Yes	Yes	Yes
usable BaseUnits	BU type A0	BU type A0	BU type A0	BU type A0	BU type A0
Color code for module-specific color identification plate	CC00	CC01	CC02	CC02	CC02
Product function
в—Џ I&M data	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3
Engineering with
в—Џ STEP 7 TIA Portal configurable/integrated as of version	V11 SP2 / V13	V13 / V13	V13 SP1 / -	V11 SP2 / V13	V13 SP1 / -
в—Џ STEP 7 configurable/integrated as of version	V5.5 SP3 / -	V5.5 SP3 / -	V5.5 SP3 / -	V5.5 SP3 / -	V5.5 / -
в—Џ PCS 7 configurable/integrated as of version	V8.1 SP1			V8.1 SP1	V8.1 SP1
в—Џ PROFIBUS as of GSD version/GSD revision	GSD Revision 5	GSD Revision 5	GSD Revision 5	GSD Revision 5	One GSD file each, Revision 3 and 5 and higher
в—Џ PROFINET as of GSD version/GSD revision	GSDML V2.3	GSDML V2.3	GSDML V2.3	GSDML V2.3	GSDML V2.3
Operating mode
в—Џ DQ	Yes	Yes	Yes	Yes	Yes
в—Џ DQ with energy-saving function	No	No	No	No	No
в—Џ PWM	No	No	No	No	No
в—Џ Oversampling	No	No	No	No	No
в—Џ MSO	No	No	No	No	Yes
Redundancy
в—Џ Redundancy capability	Yes	Yes	Yes	Yes	Yes
Supply voltage
Rated value (DC)	24 V	24 V	24 V	24 V	24 V
permissible range, lower limit (DC)	19.2 V	19.2 V	19.2 V	19.2 V	19.2 V
permissible range, upper limit (DC)	28.8 V	28.8 V	28.8 V	28.8 V	28.8 V
Reverse polarity protection	Yes		Yes	Yes	Yes
Input current
Current consumption, max.	60 mA; without load		45 mA; without load	35 mA; without load
Output voltage
Rated value (DC)	24 V	24 V	24 V	24 V	24 V
Power loss
Power loss, typ.	1 W	1.5 W	1 W	1 W	1 W
Address area
Address space per module
в—Џ Address space per module, max.	2 byte	1 byte	1 byte	1 byte; + 1 byte for QI information	8 byte; 2 channels per submodule + QI information
в—Џ Outputs		1 byte
Hardware configuration
Automatic encoding
в—Џ Mechanical coding element			Yes	Yes
Selection of BaseUnit for connection variants
в—Џ 1-wire connection			BU type A0	BU type A0
в—Џ 2-wire connection			BU type A0	BU type A0
в—Џ 3-wire connection			BU type A0 with AUX terminals	BU type A0 with AUX terminals
в—Џ 4-wire connection			No	No
Digital outputs
Type of digital output	Source output (PNP, current-sourcing)	Source output (PNP, current-sourcing)	Source output (PNP, current-sourcing)	Source output (PNP, current-sourcing)	Source output (PNP, current-sourcing)
Number of digital outputs	16	8	8	8	8
Current-sinking	No	Yes	No	No	No
Current-sourcing	Yes	No	Yes	Yes	Yes
Short-circuit protection	Yes	Yes	Yes; per channel, electronic	Yes	Yes
в—Џ Response threshold, typ.	0.7 to 1.3 A	1.5 A	0.7 to 1.3 A	0.7 to 1.3 A	0.7 to 1.3 A
Open-circuit detection		No
Limitation of inductive shutdown voltage to	Typ. L+ (-50 V)	Typ. 47 V	Typ. L+ (-53 V)	Typ. L+ (-50 V)	Typ. L+ (-50 V)
Controlling a digital input	Yes	Yes	Yes	Yes	Yes
Switching capacity of the outputs
в—Џ with resistive load, max.	0.5 A	0.5 A	0.5 A	0.5 A	0.5 A
в—Џ on lamp load, max.	5 W	5 W	5 W	5 W	5 W
Load resistance range
в—Џ lower limit	48 в„¦	48 в„¦	48 в„¦	48 в„¦	48 в„¦
в—Џ upper limit	12 kв„¦	3 400 в„¦	100 kв„¦	12 kв„¦	12 kв„¦
Output current
в—Џ for signal "1" rated value	0.5 A	0.5 A	0.5 A	0.5 A	0.5 A
в—Џ for signal "0" residual current, max.	0.1 mA	5 µA	1 mA	0.1 mA	0.1 mA
Output delay with resistive load
в—Џ "0" to "1", typ.	50 µs				50 µs
в—Џ "0" to "1", max.		300 µs	100 µs; at rated load	50 µs; at rated load
в—Џ "1" to "0", typ.	100 µs				100 µs
в—Џ "1" to "0", max.		600 µs	150 µs; at rated load	100 µs; at rated load
Parallel switching of two outputs
в—Џ for uprating	No	No	No	No	No
в—Џ for redundant control of a load	Yes	Yes	Yes; per module	Yes	Yes
Switching frequency
в—Џ with resistive load, max.	100 Hz	100 Hz	100 Hz	100 Hz	100 Hz
в—Џ with inductive load, max.	2 Hz	0.5 Hz	2 Hz	2 Hz	2 Hz
в—Џ on lamp load, max.	10 Hz	10 Hz	10 Hz	10 Hz	10 Hz
Total current of the outputs
в—Џ Current per channel, max.	0.5 A	0.5 A	0.5 A	0.5 A	0.5 A
в—Џ Current per module, max.	8 A	4 A	4 A	4 A	4 A
Total current of the outputs (per module)
horizontal installation
вЂ” up to 30 °C, max.	8 A
вЂ” up to 40 °C, max.	8 A
вЂ” up to 50 °C, max.	6 A
вЂ” up to 60 °C, max.	4 A	4 A	4 A	4 A	4 A
vertical installation
вЂ” up to 30 °C, max.	8 A
вЂ” up to 40 °C, max.	6 A
вЂ” up to 50 °C, max.	4 A		4 A	4 A	4 A; in all other mounting positions
вЂ” up to 60 °C, max.	4 A	4 A
Cable length
в—Џ shielded, max.	1 000 m	1 000 m	1 000 m	1 000 m	1 000 m
в—Џ unshielded, max.	600 m	600 m	600 m	600 m	600 m
Isochronous mode
Isochronous operation (application synchronized up to terminal)	No	No	No	No	Yes
Execution and activation time (TCO), min.					48 µs
Bus cycle time (TDP), min.					500 µs
Interrupts/diagnostics/status information
Diagnostics function	Yes	Yes	Yes	Yes	Yes
Substitute values connectable	Yes	No	Yes	Yes	Yes
Alarms
в—Џ Diagnostic alarm	Yes	Yes	Yes	Yes	Yes
Diagnostic messages
в—Џ Monitoring the supply voltage	Yes	Yes	Yes	Yes	Yes
в—Џ Wire-break	Yes; Module-wise	No	No	Yes; Module-wise	Yes; channel by channel
в—Џ Short-circuit		No	No	Yes; Module-wise	Yes; channel by channel
в—Џ Short-circuit to M	Yes; Module-wise
в—Џ Short-circuit to L+	Yes; Module-wise
в—Џ Group error		Yes	Yes	Yes	Yes
Diagnostics indication LED
в—Џ Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED	Yes; green PWR LED	Yes; green PWR LED	Yes; green PWR LED	Yes; green PWR LED
в—Џ Channel status display	Yes; Green LED	Yes; Green LED	Yes; Green LED	Yes; Green LED	Yes; Green LED
в—Џ for channel diagnostics	No	No	No	No	Yes; Red LED
в—Џ for module diagnostics	Yes; green/red DIAG LED	Yes; green/red DIAG LED	Yes; green/red DIAG LED	Yes; green/red DIAG LED	Yes; green/red DIAG LED
Potential separation
Potential separation channels
в—Џ between the channels	No	No	No	No	No
в—Џ between the channels and backplane bus	Yes	Yes	Yes	Yes	Yes
в—Џ between the channels and the power supply of the electronics	No
Isolation
Isolation tested with	707 V DC (type test)	707 V DC (type test)	707 V DC (type test)	707 V DC (type test)	707 V DC (type test)
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude	On request: Negative ambient temperature down to -30 °C (without condensation), installation altitudes between 2 000 m and 5 000 m
Dimensions
Width	15 mm	15 mm	15 mm	15 mm	15 mm
Height	73 mm	73 mm	73 mm	73 mm	73 mm
Depth	58 mm	58 mm	58 mm	58 mm	58 mm
Weights
Weight, approx.	28 g	30 g	28 g	28 g	30 g

Article number	6ES7132-6BD20-0BA0	6ES7132-6BD20-0CA0	6ES7132-6BD20-0DA0	6ES7132-6FD00-0BB1	6ES7132-6GD50-0BA0
	ET 200SP, DQ 4X24VDC/2A ST	ET 200SP, DQ 4X24VDC/2A HF	ET 200SP, DQ 4X24VDC/2A HIGH SPEED, PU 1	ET 200SP, DQ 4X24..230VAC/2A ST	ET 200SP, RQ 4X24VDC/2A CO ST
General information
Product type designation	DQ 4x24 V DC/2 A ST	DQ 4x24 V DC/2 A HF	DQ 4x24 V DC/2 A HS	DQ 4x24 ... 230 V AC/2 A ST	RQ 4x24VUC/2A CO ST
HW functional status				from FS04
Firmware version	V1.1	V1.0	V1.0.1	V1.0	V1.0
в—Џ FW update possible	Yes	Yes	Yes	Yes	Yes
usable BaseUnits	BU type A0	BU type A0	BU type A0	BU type B1	BU type A0
Color code for module-specific color identification plate	CC02	CC02	CC00	CC41	CC00
Product function
в—Џ I&M data	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3
Engineering with
в—Џ STEP 7 TIA Portal configurable/integrated as of version	V11 SP2 / V13	V13 / V13	V13 SP1	V13 / V13	V13 / V13
в—Џ STEP 7 configurable/integrated as of version	V5.5 SP3 / -	V5.5 SP3 / -	V5.5 SP3 / -	V5.5 SP3 / -	V5.5 SP3 / -
в—Џ PCS 7 configurable/integrated as of version	V8.1 SP1
в—Џ PROFIBUS as of GSD version/GSD revision	GSD Revision 5	GSD Revision 5	GSD Revision 5	GSD Revision 5	GSD Revision 5
в—Џ PROFINET as of GSD version/GSD revision	GSDML V2.3	GSDML V2.3	GSDML V2.3	GSDML V2.3	GSDML V2.3
Operating mode
в—Џ DQ	Yes	Yes	Yes	Yes	Yes
в—Џ DQ with energy-saving function	No	No	Yes; Valve control	No	No
в—Џ PWM	No	No	Yes	No	No
в—Џ Oversampling	No	No	Yes	No	No
в—Џ MSO	No	Yes	No	No	No
Redundancy
в—Џ Redundancy capability	Yes
Supply voltage
Rated value (DC)	24 V	24 V	24 V		24 V
permissible range, lower limit (DC)	19.2 V	19.2 V	19.2 V		19.2 V
permissible range, upper limit (DC)	28.8 V	28.8 V	28.8 V		28.8 V
Rated value (AC)				230 V
Reverse polarity protection	Yes	Yes	Yes
Input current
Current consumption (rated value)				11.5 mA	50 mA
Current consumption, max.	60 mA; without load	60 mA; without load	50 mA; without load
Output voltage
Rated value (DC)	24 V	24 V	24 V
Rated value (AC)				230 V; 24V AC to 230V AC
Power loss
Power loss, typ.	1 W	1 W	2.5 W; at 24 V, 25 °C, DQ mode, 2 A per channel	9 W; Active power, load voltage 230 V, all outputs loaded with 2 A, 50 Hz	1.2 W
Address area
Address space per module
в—Џ Address space per module, max.	1 byte; + 1 byte for QI information	1 byte; + 1 byte for QI information	1 byte; + 1 byte for QI information	1 byte; + 1 byte for QI information	1 byte; + 1 byte for QI information
в—Џ Inputs			1 byte; With QI	1 byte; With QI	1 byte; With QI
в—Џ Outputs			16 byte; Max. in Oversampling mode	1 byte	1 byte
Digital outputs
Type of digital output	Source output (PNP, current-sourcing)	Source output (PNP, current-sourcing)	Source output (PNP, current-sourcing)	Triac with zero point detection	Relays
Number of digital outputs	4	4	4	4	4
Current-sinking	No	No	No	No
Current-sourcing	Yes	Yes	Yes; Push-pull output	Yes
Short-circuit protection	Yes	Yes	Yes	No; When using BU type B1, a miniature, quick-response fuse with 10 A tripping current must be provided	No
в—Џ Response threshold, typ.	2.8 to 5.2 A	2.8 to 5.2 A	6 A
Limitation of inductive shutdown voltage to	Typ. L+ (-50 V)	L+ -(37 to 41V)	M (-1 V)
Controlling a digital input	Yes	Yes; Minimum current consumption 7 mA	No	Yes
Digital output functions, parameterizable
в—Џ PWM output			Yes
вЂ” Number, max.			4
вЂ” Cycle duration, parameterizable			Yes; 0 ms, 0.2 ms, 0.4 ms, 0.93 ms, 1.33 ms, 4.27 ms, 10.67 ms, 21.33 ms, 34.13 ms, 59.73 ms
вЂ” Resolution of the duty cycle			0.1 %
в—Џ Digital output with oversampling			Yes
вЂ” Number, max.			4
вЂ” Values per cycle, max.			32
вЂ” Resolution, min.			100 µs
Switching capacity of the outputs
в—Џ with resistive load, max.	2 A	2 A	2 A	2 A
в—Џ on lamp load, max.	10 W	10 W	10 W	100 W
Load resistance range
в—Џ lower limit	12 в„¦	12 в„¦	12 в„¦
в—Џ upper limit	3 400 в„¦	3 400 в„¦	3 400 в„¦
Output voltage
в—Џ for signal "1", min.				20.4 V
Output current
в—Џ for signal "1" rated value	2 A	2 A	2 A	2 A
в—Џ for signal "1" permissible range, min.				10 mA
в—Џ for signal "1" permissible range, max.				2 A
в—Џ for signal "0" residual current, max.	0.1 mA	0.1 mA	0.1 mA	460 µA
Output delay with resistive load
в—Џ "0" to "1", typ.	50 µs	50 µs
в—Џ "0" to "1", max.	50 µs		1 µs	10 ms
в—Џ "1" to "0", typ.	100 µs	100 µs
в—Џ "1" to "0", max.	100 µs		1 µs	10 ms
Parallel switching of two outputs
в—Џ for logic links				No
в—Џ for uprating	No	No	No	No
в—Џ for redundant control of a load	Yes			Yes
Switching frequency
в—Џ with resistive load, max.	100 Hz	100 Hz	5 kHz	10 Hz	2 Hz
в—Џ with inductive load, max.	2 Hz	2 Hz	5 kHz	0.5 Hz; Higher frequencies are possible, see Equipment Manual / Product Information
в—Џ on lamp load, max.	10 Hz	10 Hz	5 kHz	1 Hz
Total current of the outputs
в—Џ Current per channel, max.	2 A	2 A	2 A	2 A	2 A
в—Џ Current per module, max.	8 A	8 A	8 A	8 A	8 A
Total current of the outputs (per module)
horizontal installation
вЂ” up to 30 °C, max.	8 A	8 A	8 A; DQ mode
вЂ” up to 40 °C, max.	8 A	8 A	6.9 A; DQ mode	8 A
вЂ” up to 50 °C, max.	6 A	6 A	4.7 A; DQ mode	6 A
вЂ” up to 60 °C, max.	4 A	4 A	2.5 A; DQ mode	4 A	8 A
vertical installation
вЂ” up to 30 °C, max.	8 A	8 A	7.2 A; DQ mode	8 A
вЂ” up to 40 °C, max.	6 A	6 A	5.6 A; DQ mode	6 A
вЂ” up to 50 °C, max.	4 A	4 A	4 A; DQ mode	4 A
вЂ” up to 60 °C, max.	4 A	4 A	4 A; DQ mode		8 A
Relay outputs
в—Џ Number of relay outputs					4
в—Џ Rated supply voltage of relay coil L+ (DC)					24 V
в—Џ Current consumption of relays (coil current of all relays), max.					40 mA
Switching capacity of contacts
вЂ” with resistive load, max.					2 A
вЂ” Thermal continuous current, max.					2 A
вЂ” Switching current, min.					1 mA; 5 V DC
вЂ” Rated switching voltage (DC)					24 V
вЂ” Rated switching voltage (AC)					24 V
Triac outputs
в—Џ Size of motor starters according to NEMA, max.				5
Cable length
в—Џ shielded, max.	1 000 m	1 000 m	50 m	1 000 m	1 000 m
в—Џ unshielded, max.	600 m	600 m	50 m	600 m	200 m
Isochronous mode
Isochronous operation (application synchronized up to terminal)	No	Yes	Yes; Operating modes DQ and OVS only	No	No
Bus cycle time (TDP), min.		500 µs	125 µs
Jitter, max.		8 µs	1 µs
Interrupts/diagnostics/status information
Diagnostics function	Yes	Yes	Yes	No	Yes
Substitute values connectable	Yes	Yes	Yes	Yes	Yes
Alarms
в—Џ Diagnostic alarm	Yes	Yes	Yes	No	Yes
Diagnostic messages
в—Џ Monitoring the supply voltage	Yes	Yes	Yes	No	Yes
в—Џ Wire-break	Yes; Module-wise	Yes; channel by channel	No	No	No
в—Џ Short-circuit	Yes; Module-wise	Yes; channel by channel	Yes; Module-wise	No	No
в—Џ Group error	Yes	Yes	Yes	Yes	Yes
Diagnostics indication LED
в—Џ Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED	Yes; green PWR LED	Yes; green PWR LED	Yes; green PWR LED	Yes; green PWR LED
в—Џ Channel status display	Yes; Green LED	Yes; Green LED	Yes; Green LED	Yes; Green LED	Yes; Green LED
в—Џ for channel diagnostics	No	Yes; Red LED	No	No	No
в—Џ for module diagnostics	Yes; green/red DIAG LED	Yes; green/red DIAG LED	Yes; green/red DIAG LED	Yes; green/red DIAG LED	Yes; green/red DIAG LED
Potential separation
Potential separation channels
в—Џ between the channels	No	No	No	No	Yes
в—Џ between the channels and backplane bus	Yes	Yes	Yes	Yes	Yes
в—Џ between the channels and the power supply of the electronics				No	Yes
Permissible potential difference
between different circuits		75 V DC/60 V AC (base isolation)
Isolation
Isolation tested with	707 V DC (type test)	707 V DC (type test)	707 V DC (type test)	2 545 V DC/2 s (routine test)	707 V DC (type test)
Dimensions
Width	15 mm	15 mm	15 mm	20 mm	15 mm
Height	73 mm	73 mm	73 mm	73 mm	73 mm
Depth	58 mm	58 mm	58 mm	58 mm	58 mm
Weights
Weight, approx.	30 g	30 g	31 g	50 g	30 g

Article number	6ES7132-6HD00-0BB1	6ES7132-6MD00-0BB1
	ET 200SP, RQ NO 4X120VDC..230VAC/5A ST	ET 200SP,RQ NO-MA 4X120VDC..230VAC/5A ST
General information
Product type designation	RQ 4x120 VDC вЂ¦ 230 VAC/5 A NO ST	RQ 4x120 V DC ... 230 V AC/5 A NO MA ST
Firmware version	V1.1	V1.0
в—Џ FW update possible	Yes	Yes
usable BaseUnits	BU type B0, B1	BU type B0, B1
Color code for module-specific color identification plate	CC00	CC40
Product function
в—Џ I&M data	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3
Engineering with
в—Џ STEP 7 TIA Portal configurable/integrated as of version	V13 SP1	V13 SP1
в—Џ STEP 7 configurable/integrated as of version	V5.5 SP3 / -	V5.5 SP3 / -
в—Џ PROFIBUS as of GSD version/GSD revision	GSD Revision 5	GSD Revision 5
в—Џ PROFINET as of GSD version/GSD revision	GSDML V2.3	GSDML V2.3
Operating mode
в—Џ DQ	Yes	Yes
в—Џ DQ with energy-saving function	No	No
в—Џ PWM	No	No
в—Џ Oversampling	No	No
в—Џ MSO	No	No
Supply voltage
Rated value (DC)	24 V	24 V
permissible range, lower limit (DC)	19.2 V	19.2 V
permissible range, upper limit (DC)	28.8 V	28.8 V
Reverse polarity protection	Yes	Yes
Input current
Current consumption, max.	100 mA; without load	100 mA; without load
Power loss
Power loss, typ.	1.5 W	1.5 W
Address area
Address space per module
в—Џ Address space per module, max.	1 byte; + 1 byte for QI information	1 byte; + 1 byte for QI information
в—Џ Inputs	1 byte; With QI	1 byte; With QI
в—Џ Outputs	1 byte	1 byte
Digital outputs
Type of digital output	Relays	Relays
Number of digital outputs	4	4
Short-circuit protection	No	No
Switching frequency
в—Џ with resistive load, max.	2 Hz	2 Hz
в—Џ with inductive load, max.	0.5 Hz	0.5 Hz
в—Џ on lamp load, max.	2 Hz	2 Hz
Total current of the outputs
в—Џ Current per channel, max.	5 A	5 A
в—Џ Current per module, max.	20 A	20 A
Total current of the outputs (per module)
horizontal installation
вЂ” up to 50 °C, max.		20 A
вЂ” up to 60 °C, max.	20 A	16 A
vertical installation
вЂ” up to 40 °C, max.		20 A
вЂ” up to 50 °C, max.		16 A
вЂ” up to 60 °C, max.	20 A
Relay outputs
в—Џ Number of relay outputs	4	4
в—Џ Rated supply voltage of relay coil L+ (DC)	24 V	24 V
в—Џ Current consumption of relays (coil current of all relays), max.	40 mA	40 mA
в—Џ external protection for relay outputs	Yes, with 6A	Yes, with 6A
в—Џ Number of operating cycles, max.	7 000 000; see additional description in the manual	7 000 000; see additional description in the manual
Switching capacity of contacts
вЂ” with inductive load, max.	2 A; see additional description in the manual	2 A; see additional description in the manual
вЂ” with resistive load, max.	5 A; see additional description in the manual	5 A; see additional description in the manual
вЂ” Thermal continuous current, max.	5 A; Max. 1 385 VA, 150 W	5 A
вЂ” Switching current, min.	100 mA; 5 V DC	100 mA; 5 V DC
вЂ” Rated switching voltage (DC)	24 V DC to 120 V DC	24 V DC to 120 V DC
вЂ” Rated switching voltage (AC)	24V AC to 230V AC	24V AC to 230V AC
Cable length
в—Џ shielded, max.	1 000 m	1 000 m
в—Џ unshielded, max.	200 m	200 m
Isochronous mode
Isochronous operation (application synchronized up to terminal)	No	No
Interrupts/diagnostics/status information
Diagnostics function	Yes	Yes
Substitute values connectable	Yes	Yes
Alarms
в—Џ Diagnostic alarm	Yes	Yes
Diagnostic messages
в—Џ Monitoring the supply voltage	Yes	Yes
в—Џ Wire-break	No	No
в—Џ Short-circuit	No	No
в—Џ Group error	Yes	Yes
Diagnostics indication LED
в—Џ Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED	Yes; green PWR LED
в—Џ Channel status display	Yes; Green LED	Yes; Green LED
в—Џ for channel diagnostics	No	No
в—Џ for module diagnostics	Yes; green/red DIAG LED	Yes; green/red DIAG LED
Potential separation
Potential separation channels
в—Џ between the channels	Yes	Yes
в—Џ between the channels and backplane bus	Yes	Yes
в—Џ between the channels and the power supply of the electronics	Yes	Yes
Permissible potential difference
between channels and backplane bus/supply voltage	240 V AC	240 V AC
between backplane bus and supply voltage	75 V DC/60 V AC
Isolation
Isolation tested with	2 500 V DC (type test)	2 500 V DC (type test)
tested with
в—Џ between channels and backplane bus/supply voltage	2500 V DC	2500 V DC
в—Џ between backplane bus and supply voltage	707 V DC (type test)	707 V DC (type test)
Dimensions
Width	20 mm	20 mm
Height	73 mm	73 mm
Depth	58 mm	58 mm
Weights
Weight, approx.	40 g	45 g