Digital output modules . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на Digital output modules

| | | | | | |

Digital output modules

Article number	6ES7132-6BH00-0BA0	6ES7132-6BF60-0AA0	6ES7132-6BF00-0AA0	6ES7132-6BF00-0BA0	6ES7132-6BF00-0CA0
	ET 200SP, DQ 16X24VDC/0,5A ST	ET 200SP, DQ 8X24VDC/0,5A SINK BASIC	ET 200SP, DQ 8X24VDC/0,5A BASIC, PU 1	ET 200SP, DQ 8X24VDC/0,5A ST	ET 200SP, DQ 8X24VDC/0,5A HF
General information
Product type designation	ET 200SP, DQ 16x 24 V DC/0.5 A ST, PU 1	DQ 8x24VDC/0.5A SNK BA	ET 200SP, DQ 8x 24 V DC/0.5 A BA, PU 1	ET 200SP, DQ 8x 24 V DC/0.5 A ST, PU 1	ET 200SP, DQ 8x 24 V DC/0.5 A HF, PU 1
Product function
? I&M data	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3
Engineering with
? STEP 7 TIA Portal configurable/integrated as of version	V11 SP2 / V13	V13 / V13	V13 SP1 / -	V11 SP2 / V13	V13 SP1 / -
? STEP 7 configurable/integrated as of version	V5.5 SP3 / -	V5.5 SP3 / -	V5.5 SP3 / -	V5.5 SP3 / -	V5.5 / -
? PCS 7 configurable/integrated as of version	V8.1 SP1			V8.1 SP1	V8.1 SP1
? PROFIBUS as of GSD version/GSD revision	GSD Revision 5	GSD Revision 5	GSD Revision 5	GSD Revision 5	One GSD file each, Revision 3 and 5 and higher
? PROFINET as of GSD version/GSD revision	GSDML V2.3	GSDML V2.3	GSDML V2.3	GSDML V2.3	GSDML V2.3
Operating mode
? DQ	Yes	Yes	Yes	Yes	Yes
? DQ with energy-saving function	No	No	No	No	No
? PWM	No	No	No	No	No
? Oversampling	No	No	No	No	No
? MSO	No	No	No	No	Yes
Supply voltage
Type of supply voltage	DC	DC	DC	DC	DC
Rated value (DC)	24 V	24 V	24 V	24 V	24 V
Reverse polarity protection	Yes		Yes	Yes	Yes
Digital outputs
Type of digital output	Source output (PNP, current-sourcing)	Source output (PNP, current-sourcing)	Source output (PNP, current-sourcing)	Source output (PNP, current-sourcing)	Source output (PNP, current-sourcing)
Number of digital outputs	16	8	8	8	8
Current-sinking	No	Yes	No	No	No
Current-sourcing	Yes	No	Yes	Yes	Yes
Digital outputs, parameterizable	Yes	Yes	Yes	Yes	Yes
Short-circuit protection	Yes	Yes	Yes; per channel, electronic	Yes	Yes
Open-circuit detection		No
Limitation of inductive shutdown voltage to	Typ. L+ (-50 V)	Typ. 47 V	Typ. L+ (-53 V)	Typ. L+ (-50 V)	Typ. L+ (-50 V)
Controlling a digital input	Yes	Yes	Yes	Yes	Yes
Switching capacity of the outputs
? with resistive load, max.	0.5 A	0.5 A	0.5 A	0.5 A	0.5 A
? on lamp load, max.	5 W	5 W	5 W	5 W	5 W
Load resistance range
? lower limit	48 ?	48 ?	48 ?	48 ?	48 ?
? upper limit	12 k?	3 400 ?	100 k?	12 k?	12 k?
Output voltage
? Type of output voltage	DC	DC	DC	DC	DC
Output current
? for signal "1" rated value	0.5 A	0.5 A	0.5 A	0.5 A	0.5 A
? for signal "0" residual current, max.	0.1 mA	5 µA	1 mA	0.1 mA	0.1 mA
Output delay with resistive load
? "0" to "1", typ.	50 µs				50 µs
? "0" to "1", max.		300 µs	100 µs; at rated load	50 µs; at rated load
? "1" to "0", typ.	100 µs				100 µs
? "1" to "0", max.		600 µs	150 µs; at rated load	100 µs; at rated load
Parallel switching of two outputs
? for uprating	No	No	No	No	No
? for redundant control of a load	Yes	Yes	Yes; per module	Yes	Yes
Switching frequency
? with resistive load, max.	100 Hz	100 Hz	100 Hz	100 Hz	100 Hz
? with inductive load, max.	2 Hz	0.5 Hz	2 Hz	2 Hz	2 Hz
? on lamp load, max.	10 Hz	10 Hz	10 Hz	10 Hz	10 Hz
Total current of the outputs
? Current per channel, max.	0.5 A	0.5 A	0.5 A	0.5 A	0.5 A
? Current per module, max.	8 A	4 A	4 A	4 A	4 A
Total current of the outputs (per module)
horizontal installation
— up to 30 °C, max.	8 A
— up to 40 °C, max.	8 A
— up to 50 °C, max.	6 A
— up to 60 °C, max.	4 A	4 A	4 A	4 A	4 A
vertical installation
— up to 30 °C, max.	8 A
— up to 40 °C, max.	6 A
— up to 50 °C, max.	4 A		4 A	4 A	4 A; in all other mounting positions
— up to 60 °C, max.	4 A	4 A
Cable length
? shielded, max.	1 000 m	1 000 m	1 000 m	1 000 m	1 000 m
? unshielded, max.	600 m	600 m	600 m	600 m	600 m
Isochronous mode
Isochronous operation (application synchronized up to terminal)	No	No	No	No	Yes
Execution and activation time (TCO), min.					48 µs
Bus cycle time (TDP), min.					500 µs
Interrupts/diagnostics/status information
Diagnostics function	Yes	Yes	Yes	Yes	Yes
Substitute values connectable	Yes	No	Yes	Yes	Yes
Alarms
? Diagnostic alarm	Yes	Yes	Yes	Yes	Yes
Diagnostic messages
? Monitoring the supply voltage	Yes	Yes	Yes	Yes	Yes
? Wire-break	Yes; Module-wise	No	No	Yes; Module-wise	Yes; channel by channel
? Short-circuit	Yes; Module-wise	No	No	Yes; Module-wise	Yes; channel by channel
? Group error	Yes	Yes	Yes	Yes	Yes
Diagnostics indication LED
? Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED	Yes; green PWR LED	Yes; green PWR LED	Yes; green PWR LED	Yes; green PWR LED
? Channel status display	Yes; Green LED	Yes; Green LED	Yes; Green LED	Yes; Green LED	Yes; Green LED
? for channel diagnostics	No	No	No	No	Yes; Red LED
? for module diagnostics	Yes; green/red DIAG LED	Yes; green/red DIAG LED	Yes; green/red DIAG LED	Yes; green/red DIAG LED	Yes; green/red DIAG LED
Potential separation
Potential separation channels
? between the channels and backplane bus	Yes	Yes	Yes	Yes	Yes
Isolation
Isolation tested with	707 V DC (type test)	707 V DC (type test)	707 V DC (type test)	707 V DC (type test)	707 V DC (type test)
Standards, approvals, certificates
Suitable for safety functions	No	No	No	No	No
Dimensions
Width	15 mm	15 mm	15 mm	15 mm	15 mm
Height	73 mm	73 mm	73 mm	73 mm	73 mm
Depth	58 mm	58 mm	58 mm	58 mm	58 mm
Weights
Weight, approx.	28 g	30 g	28 g	28 g	30 g

Article number	6ES7132-6BD20-0BA0	6ES7132-6BD20-0CA0	6ES7132-6BD20-0DA0	6ES7132-6FD00-0BB1	6ES7132-6GD50-0BA0
	ET 200SP, DQ 4X24VDC/2A ST	ET 200SP, DQ 4X24VDC/2A HF	ET 200SP, DQ 4X24VDC/2A HIGH SPEED, PU 1	ET 200SP, DQ 4X24..230VAC/2A ST	ET 200SP, RQ 4X24VDC/2A CO ST
General information
Product type designation	ET 200SP, DQ 4x 24 V DC/2 A ST, PU 1	ET 200SP, DQ 4x 24 V DC/2 A HF, PU 1	ET 200SP, DQ 4x 24 V DC/2 A High Speed, PU 1	ET 200SP, DQ 4x 24 ... 230 V AC/2 A ST, PU 1	RQ 4x24VUC/2A CO ST
Product function
? I&M data	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3
Engineering with
? STEP 7 TIA Portal configurable/integrated as of version	V11 SP2 / V13	V13 / V13	V13 SP1	V13 / V13	V13 / V13
? STEP 7 configurable/integrated as of version	V5.5 SP3 / -	V5.5 SP3 / -	V5.5 SP3 / -	V5.5 SP3 / -	V5.5 SP3 / -
? PCS 7 configurable/integrated as of version	V8.1 SP1
? PROFIBUS as of GSD version/GSD revision	GSD Revision 5	GSD Revision 5	GSD Revision 5	GSD Revision 5	GSD Revision 5
? PROFINET as of GSD version/GSD revision	GSDML V2.3	GSDML V2.3	GSDML V2.3	GSDML V2.3	GSDML V2.3
Operating mode
? DQ	Yes	Yes	Yes	Yes	Yes
? DQ with energy-saving function	No	No	Yes; Valve control	No	No
? PWM	No	No	Yes	No	No
? Oversampling	No	No	Yes	No	No
? MSO	No	Yes	No	No	No
Supply voltage
Type of supply voltage	DC	DC	DC	24V AC to 230V AC	DC
Rated value (DC)	24 V	24 V	24 V		24 V
Rated value (AC)				230 V
Reverse polarity protection	Yes	Yes	Yes
Digital outputs
Type of digital output	Source output (PNP, current-sourcing)	Source output (PNP, current-sourcing)	Source output (PNP, current-sourcing)	Triac with zero point detection	Relays
Number of digital outputs	4	4	4	4	4
Current-sinking	No	No	No	No
Current-sourcing	Yes	Yes	Yes; Push-pull output	Yes
Digital outputs, parameterizable	Yes	Yes	Yes	No
Short-circuit protection	Yes	Yes	Yes	No; When using BU type B1, a miniature, quick-response fuse with 10 A tripping current must be provided	No
Limitation of inductive shutdown voltage to	Typ. L+ (-50 V)	L+ -(37 to 41V)	M (-1 V)
Controlling a digital input	Yes	Yes; Minimum current consumption 7 mA	No	Yes
Digital output functions, parameterizable
? PWM output			Yes
— Number, max.			4
— Cycle duration, parameterizable			Yes; 0 ms, 0.2 ms, 0.4 ms, 0.93 ms, 1.33 ms, 4.27 ms, 10.67 ms, 21.33 ms, 34.13 ms, 59.73 ms
? Digital output with oversampling			Yes
— Number, max.			4
— Values per cycle, max.			32
— Resolution, min.			100 µs
Switching capacity of the outputs
? with resistive load, max.	2 A	2 A	2 A	2 A
? on lamp load, max.	10 W	10 W	10 W	100 W
Load resistance range
? lower limit	12 ?	12 ?	12 ?
? upper limit	3 400 ?	3 400 ?	3 400 ?
Output voltage
? Type of output voltage	DC	DC	DC	24V AC to 230V AC	DC
? for signal "1", min.				20.4 V
? permissible voltage at output, min.				20.4 V
? permissible voltage at output, max.				264 V
Output current
? for signal "1" rated value	2 A	2 A	2 A	2 A
? for signal "0" residual current, max.	0.1 mA	0.1 mA	0.1 mA	460 µA
Output delay with resistive load
? "0" to "1", typ.	50 µs	50 µs
? "0" to "1", max.	50 µs		1 µs	10 ms
? "1" to "0", typ.	100 µs	100 µs
? "1" to "0", max.	100 µs		1 µs	10 ms
Parallel switching of two outputs
? for logic links				No
? for uprating	No	No	No	No
? for redundant control of a load	Yes			Yes
Switching frequency
? with resistive load, max.	100 Hz	100 Hz	5 kHz	10 Hz	2 Hz
? with inductive load, max.	2 Hz	2 Hz	5 kHz	0.5 Hz; Higher frequencies are possible, see Equipment Manual / Product Information
? on lamp load, max.	10 Hz	10 Hz	5 kHz	1 Hz
Total current of the outputs
? Current per channel, max.	2 A	2 A	2 A	2 A	2 A
? Current per module, max.	8 A	8 A	8 A	8 A	8 A
Total current of the outputs (per module)
horizontal installation
— up to 30 °C, max.	8 A	8 A	8 A; DQ mode
— up to 40 °C, max.	8 A	8 A	6.9 A; DQ mode	8 A
— up to 50 °C, max.	6 A	6 A	4.7 A; DQ mode	6 A
— up to 60 °C, max.	4 A	4 A	2.5 A; DQ mode	4 A	8 A
vertical installation
— up to 30 °C, max.	8 A	8 A	7.2 A; DQ mode	8 A
— up to 40 °C, max.	6 A	6 A	5.6 A; DQ mode	6 A
— up to 50 °C, max.	4 A	4 A	4 A; DQ mode	4 A
— up to 60 °C, max.	4 A	4 A	4 A; DQ mode		8 A
Relay outputs
? Number of relay outputs					4
? Rated supply voltage of relay coil L+ (DC)					24 V
? Current consumption of relays (coil current of all relays), max.					40 mA
Switching capacity of contacts
— with resistive load, max.					2 A
— Thermal continuous current, max.					2 A
— Switching current, min.					1 mA; 5 V DC
— Rated switching voltage (DC)					24 V
— Rated switching voltage (AC)					24 V
Triac outputs
? Size of motor starters according to NEMA, max.				5
Cable length
? shielded, max.	1 000 m	1 000 m	50 m	1 000 m	1 000 m
? unshielded, max.	600 m	600 m	50 m	600 m	200 m
Isochronous mode
Isochronous operation (application synchronized up to terminal)	No	Yes	Yes; Operating modes DQ and OVS only	No	No
Bus cycle time (TDP), min.		500 µs	125 µs
Interrupts/diagnostics/status information
Diagnostics function	Yes	Yes	Yes	No	Yes
Substitute values connectable	Yes	Yes	Yes	Yes	Yes
Alarms
? Diagnostic alarm	Yes	Yes	Yes	No	Yes
Diagnostic messages
? Monitoring the supply voltage	Yes	Yes	Yes	No	Yes
? Wire-break	Yes; Module-wise	Yes; channel by channel	No	No	No
? Short-circuit	Yes; Module-wise	Yes; channel by channel	Yes; Module-wise	No	No
? Group error	Yes	Yes	Yes	Yes	Yes
Diagnostics indication LED
? Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED	Yes; green PWR LED	Yes; green PWR LED	Yes; green PWR LED	Yes; green PWR LED
? Channel status display	Yes; Green LED	Yes; Green LED	Yes; Green LED	Yes; Green LED	Yes; Green LED
? for channel diagnostics	No	Yes; Red LED	No	No	No
? for module diagnostics	Yes; green/red DIAG LED	Yes; green/red DIAG LED	Yes; green/red DIAG LED	Yes; green/red DIAG LED	Yes; green/red DIAG LED
Potential separation
Potential separation channels
? between the channels and backplane bus	Yes	Yes	Yes	Yes	Yes
Isolation
Isolation tested with	707 V DC (type test)	707 V DC (type test)	707 V DC (type test)	2 545 V DC/2 s (routine test)	707 V DC (type test)
Standards, approvals, certificates
Suitable for safety functions	No	No	No	No	No
Dimensions
Width	15 mm	15 mm	15 mm	20 mm	15 mm
Height	73 mm	73 mm	73 mm	73 mm	73 mm
Depth	58 mm	58 mm	58 mm	58 mm	58 mm
Weights
Weight, approx.	30 g	30 g	31 g	50 g	30 g

Article number	6ES7132-6HD00-0BB1	6ES7132-6MD00-0BB1
	ET 200SP, RQ NO 4X120VDC..230VAC/5A ST	ET 200SP,RQ NO-MA 4X120VDC..230VAC/5A ST
General information
Product type designation	ET 200SP, RQ 4x120VDC-230VAC/5A NO ST, PU 1	ET 200SP, RQ 4x120VDC-230VAC/5A NO MA ST
Product function
? I&M data	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3
Engineering with
? STEP 7 TIA Portal configurable/integrated as of version	V13 SP1	V13 SP1
? STEP 7 configurable/integrated as of version	V5.5 SP3 / -	V5.5 SP3 / -
? PROFIBUS as of GSD version/GSD revision	GSD Revision 5	GSD Revision 5
? PROFINET as of GSD version/GSD revision	GSDML V2.3	GSDML V2.3
Operating mode
? DQ	Yes	Yes
? DQ with energy-saving function	No	No
? PWM	No	No
? Oversampling	No	No
? MSO	No	No
Supply voltage
Type of supply voltage	DC	DC
Rated value (DC)	24 V	24 V
Reverse polarity protection	Yes	Yes
Digital outputs
Type of digital output	Relays	Relays
Number of digital outputs	4	4
Short-circuit protection	No	No
Output voltage
? Type of output voltage	AC/DC	AC/DC
Switching frequency
? with resistive load, max.	2 Hz	2 Hz
? with inductive load, max.	0.5 Hz	0.5 Hz
? on lamp load, max.	2 Hz	2 Hz
Total current of the outputs
? Current per channel, max.	5 A	5 A
? Current per module, max.	20 A	20 A
Total current of the outputs (per module)
horizontal installation
— up to 50 °C, max.		20 A
— up to 60 °C, max.	20 A	16 A
vertical installation
— up to 40 °C, max.		20 A
— up to 50 °C, max.		16 A
— up to 60 °C, max.	20 A
Relay outputs
? Number of relay outputs	4	4
? Rated supply voltage of relay coil L+ (DC)	24 V	24 V
? Current consumption of relays (coil current of all relays), max.	40 mA	40 mA
? external protection for relay outputs	Yes, with 6A	Yes, with 6A
? Number of operating cycles, max.	7 000 000; see additional description in the manual	7 000 000; see additional description in the manual
Switching capacity of contacts
— with inductive load, max.	2 A; see additional description in the manual	2 A; see additional description in the manual
— with resistive load, max.	5 A; see additional description in the manual	5 A; see additional description in the manual
— Thermal continuous current, max.	5 A; Max. 1 385 VA, 150 W	5 A
— Switching current, min.	100 mA; 5 V DC	100 mA; 5 V DC
— Rated switching voltage (DC)	24 V DC to 120 V DC	24 V DC to 120 V DC
— Rated switching voltage (AC)	24V AC to 230V AC	24V AC to 230V AC
Cable length
? shielded, max.	1 000 m	1 000 m
? unshielded, max.	200 m	200 m
Isochronous mode
Isochronous operation (application synchronized up to terminal)	No	No
Interrupts/diagnostics/status information
Diagnostics function	Yes	Yes
Substitute values connectable	Yes	Yes
Alarms
? Diagnostic alarm	Yes	Yes
Diagnostic messages
? Monitoring the supply voltage	Yes	Yes
? Wire-break	No	No
? Short-circuit	No	No
? Group error	Yes	Yes
Diagnostics indication LED
? Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED	Yes; green PWR LED
? Channel status display	Yes; Green LED	Yes; Green LED
? for channel diagnostics	No	No
? for module diagnostics	Yes; green/red DIAG LED	Yes; green/red DIAG LED
Potential separation
Potential separation channels
? between the channels and backplane bus	Yes	Yes
Isolation
Isolation tested with	2 500 V DC (type test)	2 500 V DC (type test)
tested with
? between channels and backplane bus/supply voltage	2500 V DC	2500 V DC
? between backplane bus and supply voltage	707 V DC (type test)	707 V DC (type test)
Standards, approvals, certificates
Suitable for safety functions	No	No
Dimensions
Width	20 mm	20 mm
Height	73 mm	73 mm
Depth	58 mm	58 mm
Weights
Weight, approx.	40 g	45 g

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания