SIPLUS S7-400 power supplies . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS S7-400 power supplies

| | | | | | |

Article number	6AG1405-0KA02-7AA0	6AG1405-0KR02-7AA0	6AG1407-0KA02-7AA0	6AG1407-0KR02-7AA0
	SIPLUS S7-400 PS405 10A	SIPLUS S7-400 PS405 10A	SIPLUS S7-400 PS407 10A	SIPLUS S7-400 PS407 10A
General information
Product type designation	PS 405	PS 405	PS 407	PS 407
Supply voltage
Rated value (DC)
в—Џ 24 V DC	Yes	Yes
в—Џ 48 V DC	Yes	Yes
в—Џ 60 V DC	Yes	Yes
в—Џ 120 V DC			Yes	Yes
в—Џ 230 V DC			Yes	Yes
permissible range, lower limit (DC)	19.2 V; Dynamic 18.5 V	19.2 V; Dynamic 18.5 V	88 V	88 V
permissible range, upper limit (DC)	72 V; dynamic 75.5 V	72 V; dynamic 75.5 V	300 V	300 V
Rated value (AC)
в—Џ 120 V AC			Yes	Yes
в—Џ 230 V AC			Yes	Yes
permissible range, lower limit (AC)			85 V	85 V
permissible range, upper limit (AC)			264 V	264 V
Line frequency
в—Џ Rated value 50 Hz			Yes	Yes
в—Џ Rated value 60 Hz			Yes	Yes
в—Џ permissible range, lower limit			47 Hz	47 Hz
в—Џ permissible range, upper limit			63 Hz	63 Hz
Mains buffering
в—Џ Mains/voltage failure stored energy time	20 ms	20 ms	20 ms	20 ms
в—Џ Mains buffering according to NAMUR recommendation	Yes	Yes	Yes	Yes
Input current
Rated value at 24 V DC	4 A	4 A
Rated value at 48 V DC	2 A	2 A
Rated value at 60 V DC	1.6 A	1.6 A
Rated value at 110 V DC			1 A; at 120 V DC	1 A; at 120 V DC
Rated value at 230 V DC			0.5 A	0.5 A
Rated value at 120 V AC			0.9 A	0.9 A
Rated value at 230 V AC			0.5 A	0.5 A
Inrush current, max.	18 A; Full width at half maximum 20 ms	18 A; Full width at half maximum 20 ms	63 A; Full width at half maximum 1 ms	63 A; Full width at half maximum 1 ms
Output voltage
Type of output voltage	DC	DC	DC
Rated value (DC)
в—Џ 5 V DC	Yes	Yes	Yes	Yes
в—Џ 24 V DC	Yes	Yes	Yes	Yes
Output current
for backplane bus (5 V DC), max.	10 A; 7A @ > 60 °C, no base load necessary	10 A; no base load required	10 A; no base load required	10 A; no base load required
for backplane bus (24 V DC), max.	1 A; idling-proof	1 A; idling-proof	1 A; idling-proof	1 A; idling-proof
Short-circuit protection	Yes	Yes	Yes	Yes
Power
Active power input, typ.	95 W	95 W	95 W	95 W
Power loss
Power loss, typ.	20 W	20 W	20 W	20 W
Battery
Backup battery
в—Џ Backup battery (optional)	Yes; 2x lithium AA; 3.6 V / 2.3 Ah	Yes; 0 °C to +60 °C: 2 x lithium AA; 3.6 V/2.3 Ah // -25 °C to +70 °C and/or 100% RH: 2 x external battery box 6AG1971-0AA00-7AA0 and 2 x MONO cell design D	Yes; 0 °C to +60 °C: 2 x lithium AA; 3.6 V/2.3 Ah // -25 °C to +70 °C and/or 100% RH: 2 x external battery box 6AG1971-0AA00-7AA0 and 2 x MONO cell design D	Yes; 0 °C to +60 °C: 2 x lithium AA; 3.6 V/2.3 Ah // -25 °C to +70 °C and/or 100% RH: 2 x external battery box 6AG1971-0AA00-7AA0 and 2 x MONO cell design D
Hardware configuration
Slots
в—Џ required slots	2	2	2	2
Potential separation
primary/secondary	Yes	Yes	Yes	Yes
EMC
Compliance with line harmonic distortion limits
в—Џ Compliance with line harmonic distortion acc. to IEC 61000-3-2, IEC 61000-3-3			Yes	Yes
Degree and class of protection
Equipment protection class	I, with protective conductor	I, with protective conductor	I, with protective conductor	I, with protective conductor
Ambient conditions
Ambient temperature during operation
в—Џ min.	-25 °C; = Tmin	-25 °C; = Tmin; using the external battery box SIPLUS 6AG1971-0AA00-7AA0 for buffer mode	-25 °C; using the external battery box SIPLUS 6AG1971-0AA00-7AA0 for buffer mode	-25 °C; using the external battery box SIPLUS 6AG1971-0AA00-7AA0 for buffer mode
в—Џ max.	70 °C; = Tmax	70 °C; = Tmax; using the external battery box SIPLUS 6AG1971-0AA00-7AA0 for buffer mode	70 °C; using the external battery box SIPLUS 6AG1971-0AA00-7AA0 for buffer mode	70 °C; using the external battery box SIPLUS 6AG1971-0AA00-7AA0 for buffer mode
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation/frost permitted (no commissioning in bedewed state)	100 %; RH incl. condensation/frost (no commissioning if there is condensation). In buffer mode, use battery box SIPLUS 6AG1971-0AA00-7AA0 for high humidity	100 %; RH incl. condensation/frost (no commissioning if there is condensation). In buffer mode, use battery box SIPLUS 6AG1971-0AA00-7AA0 for high humidity	100 %; RH incl. condensation/frost (no commissioning if there is condensation). In buffer mode, use battery box SIPLUS 6AG1971-0AA00-7AA0 for high humidity
Resistance
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation in corrosive atmospheres!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3	Yes; Class 3C4 incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Connection method
Connecting cables/cross-sections	3x 1.5 mmІ, solid or stranded wire with end sleeve, external diameter 3 mm to 9 mm	3x 1.5 mmІ, solid or stranded wire with end sleeve, external diameter 3 mm to 9 mm	3x 1.5 mmІ, solid or stranded wire with end sleeve, external diameter 3 mm to 9 mm	3x 1.5 mmІ, solid or stranded wire with end sleeve, external diameter 3 mm to 9 mm
Dimensions
Width	50 mm	50 mm	50 mm	50 mm
Height	290 mm	290 mm	290 mm	290 mm
Depth	217 mm	217 mm	217 mm	217 mm
Weights
Weight, approx.	1.2 kg	1 200 g	1 200 g	1 200 g

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания