SIPLUS S7-300 FM 350-2 . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS S7-300 FM 350-2

| | | | | | |

Article number		6AG1350-2AH01-4AE0
		SIPLUS S7-300 FM350-2
Supply voltage
Auxiliary voltage 1L+, load voltage 2L+
в—Џ Rated value (DC)		24 V
в—Џ permissible range, lower limit (DC)		20.4 V
в—Џ permissible range, upper limit (DC)		28.8 V
Input current
from load voltage L+ (without load), max.		150 mA
from backplane bus 5 V DC, max.		100 mA
Encoder supply
Type of output voltage		NAMUR-encoder supply: 8.2 V ±2 %
Short-circuit protection		Yes
Output current
в—Џ Rated value		200 mA
Power loss
Power loss, typ.		10 W
Digital inputs
Number of digital inputs		8
Number of NAMUR inputs		8
Functions		1 each for gate start/ gate stop
Input voltage
в—Џ for signal "0"		-3 to +5V
в—Џ for signal "1"		11 to 30.2 V
Input current
в—Џ for signal "0", max. (permissible quiescent current)		2 mA
в—Џ for signal "1", typ.		9 mA
Input delay (for rated value of input voltage)
for standard inputs
вЂ” at "0" to "1", max.		50 µs
Cable length
в—Џ shielded, max.		100 m
Digital outputs
Number of digital outputs		8
Short-circuit protection		Yes
Limitation of inductive shutdown voltage to		L+ (-40 V)
Output voltage
в—Џ for signal "1", min.		L+ (-0.8 V)
Output current
в—Џ for signal "1" rated value		0.5 A
в—Џ for signal "0" residual current, max.		0.5 mA
Output delay with resistive load
в—Џ "0" to "1", max.		300 µs
Switching frequency
в—Џ with resistive load, max.		500 Hz
в—Џ with inductive load, max.		0.5 Hz
Total current of the outputs (per group)
horizontal installation
вЂ” up to 40 °C, max.		4 A
вЂ” up to 60 °C, max.		2 A
all other mounting positions
вЂ” up to 40 °C, max.		2 A
Cable length
в—Џ shielded, max.		600 m
в—Џ unshielded, max.		100 m
Encoder
Connectable encoders
в—Џ Incremental encoder (asymmetrical)		Yes
в—Џ 24 V initiator		Yes
в—Џ 24 V directional element		Yes
в—Џ NAMUR encoder		Yes
в—Џ 2-wire sensor		Yes
NAMUR encoder
в—Џ Input signal		to DIN 19 234
в—Џ Input current for signal "0", max.		1.2 mA
в—Џ Input current for signal "1", min.		2.1 mA
в—Џ Input delay, max.		50 µs
в—Џ Input frequency, max.		20 kHz
в—Џ Cable length, shielded, max.		100 m
Interrupts/diagnostics/status information
Diagnostic functions		Yes; Diagnostic information readable
Alarms
в—Џ Diagnostic alarm		Yes; Parameterizable
в—Џ Hardware interrupt		Yes; Parameterizable
Diagnostics indication LED
в—Џ Group error SF (red)		Yes
Counter input 24 V
в—Џ Number		8; 32 bit or ±31 bit
в—Џ Input voltage for signal "0"		-3 to +5V
в—Џ Input voltage for signal "1"		11 to 30.2 V
в—Џ Input current for signal "0", max. (permissible quiescent current)		2 mA
в—Џ Input current for signal "1", typ.		9 mA
в—Џ Input delay, max.		50 µs
в—Џ Counting frequency, max.		20 kHz; Incremental encoder: 10 kHz
в—Џ Cable length, max.		100 m
Potential separation
Potential separation digital inputs
в—Џ between the channels and backplane bus		Yes; and shielding
Potential separation digital outputs
в—Џ between the channels and backplane bus		Yes; and shielding
Potential separation counter
в—Џ between the channels and backplane bus		Yes; and shielding
Standards, approvals, certificates
CE mark		Yes
UL approval		Yes; File E239877
FM approval		Yes
RCM (formerly C-TICK)		Yes
KC approval		Yes
EAC (formerly Gost-R)		Yes
Ambient conditions
Ambient temperature during operation
в—Џ min.		0 °C; = Tmin
в—Џ max.		60 °C; = Tmax
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3		Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Connection method
required front connector		1x 40-pin
Dimensions
Width		80 mm
Height		125 mm
Depth		120 mm
Weights
Weight, approx.		460 g

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания