| °C (°F) | | |
A. Iron and steel works |
1. Blast furnace |
Hot blast | 1000 (1832) | Ni Cr/Ni | Open protective tube X 10 CrAl 24, mat. No. 1.4762, bare soldering point, cemented |
Crude gas | 300 (572) | Ni Cr/Ni | X 10 CrAl 24, mat. No. 1.4762, dished |
2. Air preheater |
Dome | 1200 (2192) | Pt 10 % Rh/Pt | Outside: X 15 CrNiSi 24 19, mat. No. 1.4841, inside: KER 710 |
Exhaust gas | 300 (572) | Ni Cr/Ni | St 35.8, mat. No. 1.0305, seamless, enamelled |
3. Open-hearth furnace |
Exhaust gas ducts | 600 (1112) | Ni Cr/Ni | X 10 CrAl 24, mat. No. 1.4762, dished |
Checkers | 1350 (2462) | Pt 10 % Rh/Pt | Outside: Silicon carbide inside: KER 710 |
Melt (for short periods) | 1600 (2912) | Pt 10 % Rh/Pt | Immersion-type thermocouple element of special design |
4. Soaking pit |
Furnace chamber | 1350 (2462) | Pt 10 % Rh/Pt | Outside: Silicon carbide inside: KER 710 |
Exhaust gas before or behind recuperator | 1000 (1832) | Ni Cr/Ni | X 10 CrAl 24, mat. No. 1.4762, dished; installation with gas-tight screw socket |
Combustion air behind recuperator | 700 (1292) | Ni Cr/Ni | X 10 CrAl 24, mat. No. 1.4762, dished; installation with gas-tight screw socket |
5. Pusher, rotating hearth furnace, and other types of rolling mill furnace |
Preheating zone | 800 (1472) | Pt 10 % Rh/Pt or Ni Cr/Ni | Outside: Silicon carbide inside: KER 710 or outside: Silicon carbide inside: KER 610 |
Heating zone | 1250 (2282) | Pt 10 % Rh/Pt | As above |
Soaking zone | 1350 (2462) | Pt 10 % Rh/P | Outside: Silicon carbide inside: KER 710 |
Exhaust gas before air recuperator | 900 (1652) | Ni Cr/Ni | X 10 CrAl 24, mat. No. 1.4762, dished; installation with gas-tight screw socket |
Exhaust gas before and behind gas recuperator | 700 (1292) | Ni Cr/Ni | As above or KER 610 |
Preheated air behind recuperator | 700 (1292) | Ni Cr/Ni | As above |
6. Annealing furnace, roller-hearth furnace |
Furnace chamber | 800 (1472) | Ni Cr/Ni | X 10 CrAl 24, mat. No. 1.4762, dished |
Exhaust gas duct | 600 (1112) | Ni Cr/Ni | As above |
7. Bell-type anneal. furn. |
Directly heated furnace | 950 (1742) | Ni Cr/Ni | X 10 CrAl 24, mat. No. 1.4762, dished |
Stack for tin plates | 600 ... 900 (1112 ... 1652) | Ni Cr/Ni | Special design, bare thermocouple element with thermal contact plate |
Stapel fГјr Karosseriebleche | 700 ... 920 (1292 ... 1688) | Ni Cr/Ni | As above |
Schutzgas | 650 (1202) | Ni Cr/Ni | Bare thermocouple element |
8. Sinter belts |
(Sucking boxes) | 400 (752) | Fe/Cu Ni | (Jacket thermocouple element) X 10 CrAl 24, mat. No. 1.4762 |
For temperature maximum computing circuit | 400, 500 (752, 932) | Fe/Cu Ni | As above, with double thermocouple |
9. Tinning plants |
Palm nut oil, pickling vat, tin bath | 650 (1202) | Ni Cr/Ni | St 35.8, mat. No. 1.0305, seamless, enamelled |
10. Zinc coating plants |
Zinc bath | 480 (896) | Fe/Cu Ni | St 35.8, mat. No. 1.0305, seamless |
11. Heat treatment plants 11.1 In gases |
Tempering furnaces | 550 (1022) | Ni Cr/Ni | St 35.8, mat. No. 1.0305, seamless |
Annealing in oxidizing gases containing sulphur and carbon | 1050 (1922) | Pt 10 % Rh/Pt (Ni Cr/Ni) | Outside: X 10 CrAl 24, mat. No. 1.4762, dished inside: KER 710 |
1200 (2192) | Pt 10 % Rh/Pt | Outside: X 10 CrAl 24, mat. No. 1.4762, dished inside: KER 710 |
Annealing in reducing gases containing sulphur | 1200 (2192) | Pt 10 % Rh/Pt | As above |
Annealing in nitrogen-containing gases poor in oxygen, also nitriding furnaces with ammonia | 1200 (2192) | Pt 10 % Rh/Pt | Outside: X 15 CrNiSi 24 19, mat. No. 1.4841, dished; inside: KER 710 |
11.2 In hardening shop baths(protective tubes bored from the solid are recommended) |
Salt and nitre | 550 (1022) | Ni Cr/Ni | Soft iron, mat. No. 1.1003 |
Cyanogen | 950 (1742) | Ni Cr/Ni | Soft iron or X 15 CrNiSi 24 19, mat. No. 1.4841 |
Baths containing chloride | 1050 (1922) | Pt 10 % Rh/Pt | Outside: X 10 CrAl 24, mat. No. 1.4762, inside: KER 710 |
Lead baths | 1200 (2192) | Pt 10 % Rh/P | Outside: Chromium nickel alloy NiCr 60 15, mat. No. 2.4867, inside: KER 710; bored from the solid |
Barium chloride baths | 1300 (2372) | Pt 10 % Rh/Pt | Outside: Chromium nickel alloy NiCr 60 15, mat. No. 2.4867, inside: KER 710; |
B. Metallurgical plants (only limited life time in molten metals) |
Copper melt | 1250 (2282) | Pt 10 % Rh/Pt | Outside: X 10 CrSi 29, mat. No. 1.4772, bored from the solid inside: KER 710 |
Exhaust of copper melting furnaces | 1300 (2372) | Pt 10 % Rh/Pt | Outside: Silicon carbide inside: KER 710 |
Brass melts | 900 (1652) | Ni Cr/Ni | X 10 CrAl 29, mat. No. 1.4772, bored from the solid |
Aluminium melts | 700 (1292) | Ni Cr/Ni | Pearlite iron GG 22, bored from the solid |
Die-casting, magnesium | 700 (1292) | Ni Cr/Ni | Soft iron, mat. No. 1.1003, bored from the solid |
Bearing metal, lead and tin melting houses | 600 (1112) | Fe/Cu Ni | St 35.8, mat. No. 1.0305, seamless, enamelled |
Lead foundries | 700 (1292) | Fe/Cu Ni | Chromium nickel alloy NiCr 60 15, mat. No. 2.4867, bored from the solid |
Zinc foundries | 480 (878) | Fe/Cu Ni | St 35.8, mat. No. 1.0305, seamless |
600 (1112) | Fe/Cu Ni | Silicon carbide |
Exhaust gases of zinc melting furnaces | 1300 (2372) | Pt 10 % Rh/Pt | Outside: Silicon carbide inside: KER 710 |
C. Ceramic industry |
Ring kiln for standard bricks | 800 ... 1100 (1472 ... 2012) | Ni Cr/Ni | X 10 CrAl 24, mat. No. 1.4762, dished |
Ring kiln for clinkers, retort furnace, tunnel furnace, glazing kiln | 1200 ... 1300 (2192 ... 2372) | Pt 10 % Rh/Pt | Outside and inside: KER 710 |
D. Glass industry |
1. Glass trough furnace |
Checkers of the regenerative chambers, above | 1300 (2372) | Pt 10 % Rh/Pt | Outside: KER 530 Inside: KER 710 |
Checkers of the regenerative chambers, below | 600 (1112) | Ni Cr/Ni | Thermocouple porcelain |
Lateral walls, roof, bottom (in drilled channels down to 50 mm below the bath) | 1550 (2822) 1400 (2552) | Pt 30 % Rh/ Pt 6 % Rh | Outside and inside: KER 710 |
Leer | 800 (1472) | Ni Cr/Ni | X 10 CrAl 24, mat. No. 1.4762, dished |
Annealing furnace | 1200 (2192) | Pt 10 % Rh/Pt | KER 710 |
2. Pot furnace |
| 1500 (2732) | Pt 30 % Rh/ Pt 6 % Rh | Outside and inside: KER 710 |
3. Gas generators |
Crude gas | 750 (1382) | Ni Cr/Ni | X 10 CrAl 24, mat. No. 1.4762, dished |
Rotary grate (Grate head) | 180 ... 200 (356 ... 392) For short periods: 500 to 1000 (932 to 1832) | Fe/Cu Ni | Special design on request (to be manufactured on site according to specifications) |
E. Cement industry Rotary kilns |
Secondary air at cooler | 900 (1652) | Ni Cr/Ni | X 10 CrAl 24, mat. No. 1.4762 |
Hot chamber | 900 (1652) | Ni Cr/Ni | X 10 CrAl 24, mat. No. 1.4762 |
Drying chamber | 400 (752) | Fe/Cu Ni | St 35.8, mat. No. 1.0305, or similar, enamelled |
F. Cellulose factories |
Sulphur combustion furnaces, pyrite burnerr | to 1500 (2732) | Pt 30 % Rh/ Pt 6 % Rh | Outside: Silicon carbide inside: KER 710 |
Behind waste heat boiler | 600 (1112) | Ni Cr/Ni | X 10 CrAl 24, mat. No. 1.4762 |
G. Steam power parts |
Water and steam lines (screw-in and welding-type thermocouple elements) |
Screw-in thermocouple element | 300 (572) | Fe/Cu Ni | Sn Bz 6 bronze, to DIN 1726 (only for air or water) |
Screw-in thermocouple element | 400 (752) | Fe/Cu Ni | St 35.8, mat. No. 1.0305 |
Screw-in thermocouple element | 500 (932) | Fe/Cu Ni | 113 CrMo 44, mat. No. 1.7335 |
Welding-type thermocouple element | 540 (1004) | Fe/Cu Ni | 113 CrMo 44, mat. No. 1.7335 |
Welding-type thermocouple element | 570 (1058) | Ni Cr/Ni | 10 CrMo 9 10, mat. No. 1.7380 |
750 (1382) | Fe/Cu Ni (Ni Cr/Ni) | X 8 CrMoNb 16 16, mat. No. 1.4981 |
Flue gas | 1000 (1832) | Pt 10 % Rh/Pt | Megapyr, Cr Al 20 5, mat. No. 1.4767 or outside: X 10 CrAl 24, mat. No. 1.4762, inside: KER 710 St |
600 (1112) | (Ni Cr/Ni) | St 35.8, mat. No. 1.0305, enamelled |
Pulverized coal/air mixture line | 100 (212) | Fe/Cu Ni | St 35.8, mat. No. 1.0305, (with baffle rod) |