The safety switches with tumbler are exceptional safety-related devices which prevent an unforeseen or intentional opening of protective doors, protective grilles or other covers as long as a dangerous situation is present (i. e. follow-on motion of the switched off machine).

The safety switches with tumbler have the following functions:

• Enabling the machine or process with closed and locked protective device
• Locking the machine or process with opened protective device
• Position monitoring of the protective device and tumbler

Standards

The switches comply with the standards IEC 60947-1 (Low-Voltage Controlgear, General) and IEC 60947-5-1 (Electromechanical Control Devices).

The mechanical design of the switch corresponds to the requirements of the fail-safe principle according to EN ISO 14119.

Approvals

The switches are approved for use with locking devices according to EN ISO 14119 and EN 292, Parts 1 and 2.

Category 3 according to EN ISO 13849-1 can be attained with a safety switch with tumbler if the corresponding fail-safe evaluation units are selected and correctly installed, e.g. the 3SK or 3TK28 safety relays or matching units from the ASIsafe, SIMATIC or SINUMERIK product ranges.

Category 4 can be achieved when using an additional 3SE5 safety switch.

These switches are approved according to UL 508, UL 50 and UL 746-C.

Tumbler

The separate actuator operates in a similar way to the coding of a key and protects against manipulation. It transmits the locking force to the protective device and helps to monitor its position.

There are two versions of locking:

Spring-actuated lock (closed-circuit principle)

• In the standard version, the safety switch locks by means of spring force and releases by means of electromagnetic force. In the case of voltage failure, it reliably prevents the protective device from opening when machine parts are still moving.
• The switch is equipped with an auxiliary release for emergency situations or setup mode.
• An auxiliary release which can be secured with a lock to prevent misuse is available as a version.

Auxiliary release

Auxiliary release with lock

The 3SE5 3 safety switches are also available with an escape release or emergency release.

• Personnel working inside the hazard zone can use the escape release feature to manually release the tumbler without tools from the escape side (hazardous area side) so that they can exit the hazard area from the escape side. An intentional act (in this case pulling the gray actuator) is required to release the locking mechanism and restore the normal operating state.
• The emergency release enables someone in an emergency situation to manually release the interlock without tools from the access side (outside the hazardous area). Releasing the lock and restoring the normal operating state must require effort which is comparable to repair activity, in this case disassembly of the red actuator and resetting of the mechanical lock.

Escape release from the front

Emergency release from the back

Solenoid-locked (open-circuit principle)

• The second version offers locking by means of electromagnetic force and release by means of spring force. This version has an advantage when it is necessary to quickly access the machine after a power failure occurs, or in the case of very short coasting times.

Examples of door interlocking

X-Lock door interlocking from Axelent

Door interlocking from BrГјhl