Ex-analog output module with HART . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на Ex-analog output module with HART

| | | | | | | |

Article number		6ES7332-5TB10-0AB0
		SIMATIC DP, HART ANALOG OUTPUT
Supply voltage
Load voltage L+
в—Џ Rated value (DC)		24 V
в—Џ Reverse polarity protection		Yes
Input current
from load voltage L+ (without load), max.		150 mA
from backplane bus 5 V DC, max.		100 mA
Power loss
Power loss, typ.		3.5 W
Analog outputs
Number of analog outputs		2
Current output, no-load voltage, max.		19 V
Cycle time (all channels) max.		5 ms
Output ranges, current
в—Џ 0 to 20 mA		Yes
в—Џ -20 mA to +20 mA		No
в—Џ 4 mA to 20 mA		Yes
Connection of actuators
в—Џ for current output two-wire connection		Yes
Load impedance (in rated range of output)
в—Џ with current outputs, max.		650 в„¦
в—Џ with current outputs, inductive load, max.		7.5 mH
Destruction limits against externally applied voltages and currents
в—Џ Voltages at the outputs towards MANA		max. 17 V / -0.5 V
в—Џ Current, max.		60 mA / -1 A
Cable length
в—Џ shielded, max.		400 m
Analog value generation for the outputs
Integration and conversion time/resolution per channel
в—Џ Resolution with overrange (bit including sign), max.		12 bit; + sign
в—Џ Conversion time (per channel)		40 ms
Settling time
в—Џ for resistive load		2.5 ms
в—Џ for capacitive load		4 ms
в—Џ for inductive load		2.5 ms
Errors/accuracies
Output ripple (relative to output range, bandwidth 0 to 50 kHz), (+/-)		0.02 %
Linearity error (relative to output range), (+/-)		0.03 %
Temperature error (relative to output range), (+/-)		0.01 %/K
Crosstalk between the outputs, min.		130 dB
Repeat accuracy in steady state at 25 °C (relative to output range), (+/-)		0.005 %
Operational error limit in overall temperature range
в—Џ Current, relative to output range, (+/-)		0.55 %
Basic error limit (operational limit at 25 °C)
в—Џ Current, relative to output range, (+/-)		0.15 %
Interrupts/diagnostics/status information
Diagnostic functions		Yes; Parameterizable
Substitute values connectable		Yes; Parameterizable
Alarms
в—Џ Diagnostic alarm		Yes; Parameterizable
Diagnostic messages
в—Џ Diagnostic information readable		Yes; possible
в—Џ Overrange		Yes
в—Џ Wire-break		Yes; as of output value > 0.5 mA
в—Џ HART communication active		Yes; green LED (H)
Diagnostics indication LED
в—Џ Group error SF (red)		Yes; Red LED
в—Џ Channel fault indicator F (red)		Yes; per channel
Ex(i) characteristics
Module for Ex(i) protection		Yes
Maximum values of output circuits (per channel)
в—Џ Co (permissible external capacity), max.		230 nF
в—Џ Io (short-circuit current), max.		66 mA
в—Џ Lo (permissible external inductivity), max.		7.5 mH
в—Џ Po (power of load), max.		506 mW
в—Џ Uo (output no-load voltage), max.		19 V
в—Џ Um (fault voltage), max.		60 V; DC
в—Џ Ta (permissible ambient temperature), max.		60 °C
Potential separation
Potential separation analog outputs
в—Џ between the channels		Yes
в—Џ between the channels and backplane bus		Yes
в—Џ Between the channels and load voltage L+		Yes
Permissible potential difference
between the outputs (UCM)		60 V DC/30 V AC permitted potential difference (Viso) of signals from hazardous areas
Isolation
tested with
в—Џ Channels against backplane bus and load voltage L+		2500 V DC
в—Џ Channels among one another		2500 V DC
в—Џ Load voltage L+ against backplane bus		500 V DC
Degree and class of protection
IP degree of protection		IP20
Standards, approvals, certificates
FM approval		Yes
Use in hazardous areas
в—Џ Type of protection acc. to FM		Class I, Division 2, Group A, B, C, D T4; Class I, Zone 2, Group IIC T4
в—Џ Type of protection acc. to KEMA		ATEX II 3 G (2) GD Ex nA [ib Gb] [ib IIIC Db] IIC T4 Gc
в—Џ Test number KEMA		DEKRA 14 ATEX 0053X
Connection method
required front connector		20-pin
Dimensions
Width		40 mm
Height		125 mm
Depth		120 mm
Weights
Weight, approx.		290 g

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания