Ex-analog output module with HART . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на Ex-analog output module with HART

| | | | | | | |

Ex-analog output module with HART

Article number		6ES7332-5TB10-0AB0
		SIMATIC DP, HART ANALOG OUTPUT
Supply voltage
Load voltage L+
? Rated value (DC)		24 V
? Reverse polarity protection		Yes
Input current
from load voltage L+ (without load), max.		150 mA
from backplane bus 5 V DC, max.		100 mA
Power loss
Power loss, typ.		3.5 W
Analog outputs
Number of analog outputs		2
Current output, no-load voltage, max.		19 V
Cycle time (all channels) max.		5 ms
Output ranges, current
? 0 to 20 mA		Yes
? -20 mA to +20 mA		No
? 4 mA to 20 mA		Yes
Connection of actuators
? for current output two-wire connection		Yes
Load impedance (in rated range of output)
? with current outputs, max.		650 ?
? with current outputs, inductive load, max.		7.5 mH
Destruction limits against externally applied voltages and currents
? Voltages at the outputs towards MANA		max. 17 V / -0.5 V
? Current, max.		60 mA / -1 A
Cable length
? shielded, max.		400 m
Analog value generation for the outputs
Integration and conversion time/resolution per channel
? Resolution with overrange (bit including sign), max.		12 bit; + sign
? Conversion time (per channel)		40 ms
Settling time
? for resistive load		2.5 ms
? for capacitive load		4 ms
? for inductive load		2.5 ms
Errors/accuracies
Output ripple (relative to output range, bandwidth 0 to 50 kHz), (+/-)		0.02 %
Linearity error (relative to output range), (+/-)		0.03 %
Temperature error (relative to output range), (+/-)		0.01 %/K
Crosstalk between the outputs, min.		130 dB
Repeat accuracy in steady state at 25 °C (relative to output range), (+/-)		0.005 %
Operational error limit in overall temperature range
? Current, relative to output range, (+/-)		0.55 %
Basic error limit (operational limit at 25 °C)
? Current, relative to output range, (+/-)		0.15 %
Interrupts/diagnostics/status information
Diagnostic functions		Yes; Parameterizable
Substitute values connectable		Yes; Parameterizable
Alarms
? Diagnostic alarm		Yes; Parameterizable
Diagnostic messages
? Diagnostic information readable		Yes; possible
? Overrange		Yes
? Wire-break		Yes; as of output value > 0.5 mA
? HART communication active		Yes; green LED (H)
Diagnostics indication LED
? Group error SF (red)		Yes; Red LED
? Channel fault indicator F (red)		Yes; per channel
Ex(i) characteristics
Module for Ex(i) protection		Yes
Maximum values of output circuits (per channel)
? Co (permissible external capacity), max.		230 nF
? Io (short-circuit current), max.		66 mA
? Lo (permissible external inductivity), max.		7.5 mH
? Po (power of load), max.		506 mW
? Uo (output no-load voltage), max.		19 V
? Um (fault voltage), max.		60 V; DC
? Ta (permissible ambient temperature), max.		60 °C
Potential separation
Potential separation analog outputs
? between the channels		Yes
? between the channels and backplane bus		Yes
? Between the channels and load voltage L+		Yes
Permissible potential difference
between the outputs (UCM)		60 V DC/30 V AC permitted potential difference (Viso) of signals from hazardous areas
Isolation
tested with
? Channels against backplane bus and load voltage L+		2500 V DC
? Channels among one another		2500 V DC
? Load voltage L+ against backplane bus		500 V DC
Standards, approvals, certificates
FM approval		Yes
Use in hazardous areas
? Type of protection acc. to FM		Class I, Division 2, Group A, B, C, D T4; Class I, Zone 2, Group IIC T4
? Type of protection acc. to KEMA		II 3 G (2) GD Ex nA [ib Gb] [ib IIIC Db] IIC T4 Gc
? Test number KEMA		DEKRA 14 ATEX 0053X
Connection method
required front connector		20-pin
Dimensions
Width		40 mm
Height		125 mm
Depth		120 mm
Weights
Weight, approx.		290 g

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания