• в—Џ Rated value (DC)

• в—Џ Reverse polarity protection

from load voltage L+ (without load), max.

from backplane bus 5 V DC, max.

• в—Џ present

• в—Џ Rated value (DC)

• в—Џ short-circuit proof

• в—Џ No-load voltage (DC)

Power loss, typ.

Number of analog inputs

permissible input current for current input (destruction limit), max.

• в—Џ Current

• в—Џ 0 to 20 mA

• в—Џ Input resistance (0 to 20 mA)

• в—Џ 4 mA to 20 mA

• в—Џ Input resistance (4 mA to 20 mA)

• в—Џ shielded, max.

Measurement principle

• в—Џ Resolution with overrange (bit including sign), max.

• в—Џ Integration time, parameterizable

• в—Џ Integration time (ms)

• в—Џ Basic conversion time, including integration time (ms)

• в—Џ Interference voltage suppression for interference frequency f1 in Hz

• в—Џ for current measurement as 2-wire transducer

• в—Џ for current measurement as 4-wire transducer

Linearity error (relative to input range), (+/-)

Temperature error (relative to input range), (+/-)

Crosstalk between the inputs, min.

Repeat accuracy in steady state at 25 °C (relative to input range), (+/-)

• в—Џ Current, relative to input range, (+/-)

• в—Џ Current, relative to input range, (+/-)

• в—Џ Series mode interference (peak value of interference < rated value of input range), min.

• в—Џ Common mode interference, min.

Diagnostic functions

• в—Џ Diagnostic alarm

• в—Џ Limit value alarm

• в—Џ Diagnostic information readable

• в—Џ Overrange

• в—Џ Wire-break in signal transmitter cable

• в—Џ Short-circuit of the signal encoder cable

• в—Џ HART communication active

• в—Џ Group error SF (red)

• в—Џ Channel fault indicator F (red)

Module for Ex(i) protection

• в—Џ Co (permissible external capacity), max.

• в—Џ Io (short-circuit current), max.

• в—Џ Lo (permissible external inductivity), max.

• в—Џ Po (power of load), max.

• в—Џ Uo (output no-load voltage), max.

• в—Џ Um (fault voltage), max.

• в—Џ Ta (permissible ambient temperature), max.

• в—Џ between the channels

• в—Џ between the channels and backplane bus

between the inputs (UCM)

• в—Џ Channels against backplane bus and load voltage L+

• в—Џ Channels among one another

• в—Џ Load voltage L+ against backplane bus

CE mark

UL approval

FM approval

RCM (formerly C-TICK)

KC approval

EAC (formerly Gost-R)

• в—Џ Type of protection acc. to FM

• в—Џ Type of protection acc. to KEMA

• в—Џ Test number KEMA

• в—Џ min.

• в—Џ max.

required front connector

Width

Height

Depth

Weight, approx.