Mounting rail 7.5 mm and 15 mm

24 V

20.4 V

28.8 V

Yes

20 ms

400 mA

6 W

Yes

100 Mbit/s

Yes; 4 RJ45 female connectors, 2 for each side

4; 2 for each side

Yes

Yes

Yes

Yes

No; For operation on isochronous bus

Yes

Yes

Yes

Yes; for each side

Yes; for each side

Yes; for each side

Yes; for each port

Yes; to power input 2

Yes

500 V DC

707 V DC (type test) and according to EN 50155 (routine test)

Yes; EMC for rail vehicles

Yes; EMC for signal and telecommunications systems

Yes; Railway applications - overvoltage category OV2; pollution degree PD2; rated surge voltage UNi = 0.5 kV; UNm = 24 V DC

Yes; Rail vehicles - see ambient conditions

Yes; Stationary electrical equipment - see ambient conditions

Yes; Signal and telecommunications systems - see ambient conditions; vibrations and shocks: Application point outside of tracks (1 m to 3 m away from track)

Yes; Rail vehicles - temperature class Tx, horizontal mounting position, salt spray Class ST2

Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B

Yes; Rail vehicles - verification on request

-40 °C; = Tmin; Startup @ -25 °C

60 °C; = Tmax; +70 °C for 10 min (T1 acc. to EN 50155)

Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)

100 %; RH incl. condensation/frost (no commissioning under condensation conditions)

Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request

Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!

Yes; Class 5B2 mold, fungus and dry rot spores (with the exception of fauna); Class 5B3 on request

Yes; Class 5C3 (RH < 75%) including salt spray according to EN 50155 (ST2). The supplied plug covers must remain in place over the unused interfaces during operation!

Yes; Class 5S3 including sand and dust. The supplied plug covers must remain in place over the unused interfaces during operation!

120 mm; Minimized with good handling

119.5 mm

75 mm; with mounting rail

283 g

For use in railway applications, also observe the product information "SIPLUS extreme RAIL" A5E37661960A Online Support article 109736776