Product type designation

HW functional status

Firmware version

• в—Џ FW update possible

Usable terminal block

Color code for module-specific color identification plate

• в—Џ I&M data

• в—Џ PCS 7 configurable/integrated as of version

• в—Џ DI

• в—Џ Counter

• в—Џ DQ

• в—Џ DQ with energy-saving function

• в—Џ PWM

• в—Џ Oversampling

• в—Џ MSI

• в—Џ MSO

• в—Џ Redundancy capability

Reparameterization possible in RUN

Rated value (DC)

permissible range, lower limit (DC)

permissible range, upper limit (DC)

Reverse polarity protection

Current consumption (rated value)

Current consumption, max.

Rated value (DC)

Number of outputs

Output voltage encoder supply, min.

Short-circuit protection

• в—Џ 24 V

• в—Џ Short-circuit protection

• в—Џ Output current per channel, max.

• в—Џ Output current per module, max.

Power loss, typ.

• в—Џ Address space per module, max.

• в—Џ Address space per module with HART, max.

• в—Џ Address space per module with MultiHART, max.

Number of digital inputs

Digital inputs, parameterizable

Source/sink input

Input characteristic curve in accordance with IEC 61131, type 1

Input characteristic curve in accordance with IEC 61131, type 2

Input characteristic curve in accordance with IEC 61131, type 3

Pulse extension

• в—Џ Length

Time stamping

Time stamp (with precision of 1 ms)

Edge evaluation

• в—Џ Type of input voltage

• в—Џ Rated value (DC)

• в—Џ for signal "0"

• в—Џ for signal "1"

• в—Џ for signal "1", typ.

• — parameterizable

• в—Џ shielded, max.

• в—Џ unshielded, max.

Number of digital outputs

Current-sinking

Current-sourcing

Short-circuit protection

• в—Џ Response threshold, typ.

Open-circuit detection

Overload protection

Limitation of inductive shutdown voltage to

Controlling a digital input

• в—Џ with resistive load, max.

• в—Џ on lamp load, max.

• в—Џ lower limit

• в—Џ upper limit

• в—Џ for signal "1" rated value

• в—Џ for signal "0" residual current, max.

• в—Џ "0" to "1", typ.

• в—Џ "1" to "0", typ.

• в—Џ for uprating

• в—Џ for redundant control of a load

• в—Џ with resistive load, max.

• в—Џ with inductive load, max.

• в—Џ on lamp load, max.

• в—Џ Current per channel, max.

• в—Џ Current per module, max.

• в—Џ shielded, max.

• в—Џ unshielded, max.

Number of analog inputs

permissible input current for current input (destruction limit), max.

• в—Џ 0 to 20 mA

• в—Џ Input resistance (0 to 20 mA)

• в—Џ 4 mA to 20 mA

• в—Џ Input resistance (4 mA to 20 mA)

Measurement principle

• в—Џ Resolution with overrange (bit including sign), max.

• в—Џ Integration time, parameterizable

• в—Џ parameterizable

• в—Џ for current measurement as 2-wire transducer

• в—Џ 2-wire sensor

• — permissible quiescent current (2-wire sensor), max.

Linearity error (relative to input range), (+/-)

Temperature error (relative to input range), (+/-)

Crosstalk between the inputs, min.

Repeat accuracy in steady state at 25 °C (relative to input range), (+/-)

• в—Џ Current, relative to input range, (+/-)

• в—Џ Current, relative to input range, (+/-)

Diagnostics function

Substitute values connectable

• в—Џ Diagnostic alarm

• в—Џ Limit value alarm

• в—Џ Monitoring the supply voltage

• в—Џ Wire-break

• в—Џ Short-circuit to M

• в—Џ Group error

• в—Џ Overflow/underflow

• в—Џ MAINT LED

• в—Џ Monitoring of the supply voltage (PWR-LED)

• в—Џ Channel status display

• в—Џ for channel diagnostics

• в—Џ for module diagnostics

• в—Џ between the channels

• в—Џ between the channels and backplane bus

• в—Џ Between the channels and load voltage L+

Isolation tested with

• в—Џ horizontal installation, min.

• в—Џ horizontal installation, max.

• в—Џ vertical installation, min.

• в—Џ vertical installation, max.

Width

Height

Depth

Weight, approx.