General information | |
Product type designation | TM PTO 4 |
HW functional status | FS02 |
Number of channels | 4; Axes |
Product function | |
| Yes; I&M0 to I&M3 |
| Yes |
Engineering with | |
| STEP 7 V14 or higher |
| V5.5 SP3 with GSD file / - |
| GSDML V2.32 |
Installation type/mounting | |
Rail mounting | Yes; S7-1500 mounting rail |
Supply voltage | |
Load voltage L+ | |
| 24 V |
| 19.2 V |
| 28.8 V |
| Yes |
Input current | |
Current consumption, max. | 70 mA; without load |
Power | |
Power available from the backplane bus | 1.3 W |
Power loss | |
Power loss, typ. | 4 W |
Address area | |
Occupied address area | |
| 18 byte; Per channel |
| 10 byte; Per channel |
Digital inputs | |
Number of digital inputs | 12; 3 per channel, of which 1 DIQ |
Digital inputs, parameterizable | Yes |
Input characteristic curve in accordance with IEC 61131, type 3 | Yes |
Digital input functions, parameterizable | |
| Yes |
| Yes |
| Yes |
Input voltage | |
| DC |
| 24 V |
| -5 ... +5 V |
| +11 to +30V |
| -5 V |
| 30 V |
Input current | |
| 2.5 mA |
Input delay (for rated value of input voltage) | |
for standard inputs | |
| Yes; none / 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms |
| 4 µs; for parameterization "none" |
| 4 µs; for parameterization "none" |
for counter/technological functions | |
| Yes |
Cable length | |
| 1 000 m |
| 600 m |
Digital outputs | |
Number of digital outputs | 12; 3 per channel, of which 1 DIQ |
Current-sinking | Yes; For DQn.0 and DQn.1 push-pull outputs |
Current-sourcing | Yes |
Digital outputs, parameterizable | Yes |
Short-circuit protection | Yes; electronic/thermal |
| 0.2 A for DQn.0 and DQn.1, 0.9 A for DIQn.2 |
Controlling a digital input | Yes |
Digital output functions, parameterizable | |
| |
| Yes |
| Yes |
| Yes |
| |
| Yes |
| Yes |
| Yes |
| Yes |
Switching capacity of the outputs | |
| 0.1 A; 0.5 A for DIQn.2 |
| 1 W; 5 W for DIQn.2 |
Load resistance range | |
| 240 Ω; 48 ohms for DIQn.2 |
| 12 kΩ |
Output voltage | |
| DC |
| 23.2 V; L+ (-0.8 V), L+ (-1.3 V) for DIQn.2 |
Output current | |
| 0.1 A; 0.5 A for DIQn.2 |
| 0.12 A; 0.6 A for DIQn.2 |
| 2 mA |
| 0.5 mA |
Output delay with resistive load | |
| 1 µs; 28 µs for DIQn.2 |
| 1 µs; 25 µs for DIQn.2 |
Switching frequency | |
| 1 kHz; For DIQn.2 |
| 0.5 Hz; According to IEC 60947-5-1, DC-13, for DIQn.2 |
| 10 Hz; For DIQn.2 |
| 200 kHz; With DQn.0 and DQn.1 |
| 1 MHz |
| 200 kHz |
Cable length | |
| 600 m; Cable length, RS 422 / TTL Siemens Type 6FX2001-5: 125 kHz, 320 meters shielded, max.; 250 kHz, 160 meters shielded, max.; 500 kHz, 60 meters shielded, max.; 1 MHz, 32 meters shielded, max. 24 V (DQn.x / DIQn.2): 10 kHz, 600 meters, shielded, max. 200 kHz, 50 meters shielded, max. |
Isochronous mode | |
Isochronous operation (application synchronized up to terminal) | Yes |
Bus cycle time (TDP), min. | 250 µs; 375 µs if all 4 channels are used |
Jitter, max. | 1 µs |
Interrupts/diagnostics/status information | |
Diagnostics function | Yes |
Alarms | |
| Yes |
Diagnostic messages | |
| Yes |
| Yes; Thermal overload protection |
| Yes |
Diagnostics indication LED | |
| Yes; Green LED |
| Yes; Red LED |
| Yes; yellow LED |
| Yes; Green LED |
| Yes; Green LED |
| Yes; Red LED |
Potential separation | |
Potential separation channels | |
| No |
| Yes |
| No |
Isolation | |
Isolation tested with | 707 V DC (type test) |
Ambient conditions | |
Ambient temperature during operation | |
| 0 °C |
| 60 °C; Observe derating |
| 0 °C |
| 40 °C; Observe derating |
Decentralized operation | |
to SIMATIC S7-300 | Yes; Via control and feedback interface |
to SIMATIC S7-400 | Yes; Via control and feedback interface |
to SIMATIC S7-1200 | Yes |
to SIMATIC S7-1500 | Yes |
to standard PROFINET controller | Yes; Via control and feedback interface |
Dimensions | |
Width | 35 mm |
Height | 147 mm |
Depth | 129 mm |
Weights | |
Weight, approx. | 300 g |