Siemens
СРЕДСТВА ПРОМЫШЛЕННОЙ АВТОМАТИЗАЦИИ
официальный партнер Сименс
Каталог СА01 2018
(4872) 700-366
skenergo@mail.ru

Article number

6AG1511-1FK01-2AB0

SIPLUS S7-1500 CPU 1511F-1 PN

General information

 

Product type designation

CPU 1511F-1 PN

HW functional status

FS01

Firmware version

V1.8

Engineering with

 

  • в—Џ STEP 7 TIA Portal configurable/integrated as of version

V13 SP1 Update 4

Display

 

Screen diagonal [cm]

3.45 cm

Control elements

 

Number of keys

6

Mode selector switch

1

Supply voltage

 

Type of supply voltage

24 V DC

permissible range, lower limit (DC)

19.2 V

permissible range, upper limit (DC)

28.8 V

Reverse polarity protection

Yes

Mains buffering

 

  • в—Џ Mains/voltage failure stored energy time

5 ms

Input current

 

Current consumption (rated value)

0.7 A

Inrush current, max.

1.9 A; Rated value

IІt

0.02 AІ·s

Power

 

Infeed power to the backplane bus

10 W

Power consumption from the backplane bus (balanced)

5.5 W

Power loss

 

Power loss, typ.

5.7 W

Memory

 

SIMATIC memory card required

Yes

Work memory

 

  • в—Џ integrated (for program)

225 kbyte

  • в—Џ integrated (for data)

1 Mbyte

Load memory

 

  • в—Џ Plug-in (SIMATIC Memory Card), max.

32 Gbyte

Backup

 

  • в—Џ maintenance-free

Yes

CPU processing times

 

for bit operations, typ.

60 ns

for word operations, typ.

72 ns

for fixed point arithmetic, typ.

96 ns

for floating point arithmetic, typ.

384 ns

CPU-blocks

 

Number of blocks (total)

2 000

DB

 

  • в—Џ Number, max.

2 000; Number range: 1 to 65535

  • в—Џ Size, max.

1 Mbyte; For non-optimized block accesses, the max. size of the DB is 64 KB

FB

 

  • в—Џ Number, max.

1 998; Number range: 1 to 65535

  • в—Џ Size, max.

225 kbyte

FC

 

  • в—Џ Number, max.

1 999; Number range: 1 to 65535

  • в—Џ Size, max.

225 kbyte

OB

 

  • в—Џ Size, max.

225 kbyte

  • в—Џ Number of free cycle OBs

100

  • в—Џ Number of time alarm OBs

20

  • в—Џ Number of delay alarm OBs

20

  • в—Џ Number of cyclic interrupt OBs

20

  • в—Џ Number of process alarm OBs

50

  • в—Џ Number of DPV1 alarm OBs

3

  • в—Џ Number of isochronous mode OBs

1

  • в—Џ Number of technology synchronous alarm OBs

2

  • в—Џ Number of startup OBs

100

  • в—Џ Number of asynchronous error OBs

4

  • в—Џ Number of synchronous error OBs

2

  • в—Џ Number of diagnostic alarm OBs

1

Nesting depth

 

  • в—Џ per priority class

24; Up to 8 possible for F-blocks

Counters, timers and their retentivity

 

S7 counter

 

  • в—Џ Number

2 048

Retentivity

 

  • — adjustable

Yes

IEC counter

 

  • в—Џ Number

Any (only limited by the main memory)

Retentivity

 

  • — adjustable

Yes

S7 times

 

  • в—Џ Number

2 048

Retentivity

 

  • — adjustable

Yes

IEC timer

 

  • в—Џ Number

Any (only limited by the main memory)

Retentivity

 

  • — adjustable

Yes

Data areas and their retentivity

 

Retentive data area (incl. timers, counters, flags), max.

128 kbyte; In total; available retentive memory for bit memories, timers, counters, DBs, and technology data (axes): 88 KB

Flag

 

  • в—Џ Number, max.

16 kbyte

  • в—Џ Number of clock memories

8; 8 clock memory bits, grouped into one clock memory byte

Data blocks

 

  • в—Џ Retentivity adjustable

Yes

  • в—Џ Retentivity preset

No

Local data

 

  • в—Џ per priority class, max.

64 kbyte; max. 16 KB per block

Address area

 

Number of IO modules

1 024; max. number of modules / submodules

I/O address area

 

  • в—Џ Inputs

32 kbyte; All inputs are in the process image

  • в—Џ Outputs

32 kbyte; All outputs are in the process image

per integrated IO subsystem

 

  • — Inputs (volume)

8 kbyte

  • — Outputs (volume)

8 kbyte

per CM/CP

 

  • — Inputs (volume)

8 kbyte

  • — Outputs (volume)

8 kbyte

Subprocess images

 

  • в—Џ Number of subprocess images, max.

32

Hardware configuration

 

Number of distributed IO systems

5

Number of DP masters

 

  • в—Џ Via CM

4; A maximum of 4 CMs/CPs (PROFIBUS, PROFINET, Ethernet) can be inserted in total

Number of IO Controllers

 

  • в—Џ integrated

1

  • в—Џ Via CM

4; A maximum of 4 CMs/CPs (PROFIBUS, PROFINET, Ethernet) can be inserted in total

Rack

 

  • в—Џ Modules per rack, max.

32; CPU + 31 modules

  • в—Џ Number of lines, max.

1

PtP CM

 

  • в—Џ Number of PtP CMs

the number of connectable PtP CMs is only limited by the number of available slots

Time of day

 

Clock

 

  • в—Џ Type

Hardware clock

  • в—Џ Backup time

6 wk; At 40 °C ambient temperature, typically

  • в—Џ Deviation per day, max.

10 s; Typ.: 2 s

Operating hours counter

 

  • в—Џ Number

8

Clock synchronization

 

  • в—Џ supported

Yes

  • в—Џ in AS, master

Yes

  • в—Џ in AS, slave

Yes

  • в—Џ on Ethernet via NTP

Yes

Interfaces

 

Number of PROFINET interfaces

1

1. Interface

 

Interface types

 

  • в—Џ Number of ports

2

  • в—Џ integrated switch

Yes

  • в—Џ RJ 45 (Ethernet)

Yes; X1

Functionality

 

  • в—Џ PROFINET IO Controller

Yes

  • в—Џ PROFINET IO Device

Yes

  • в—Џ SIMATIC communication

Yes

  • в—Џ Open IE communication

Yes

  • в—Џ Web server

Yes

  • в—Џ Media redundancy

Yes

Interface types

 

RJ 45 (Ethernet)

 

  • в—Џ 100 Mbps

Yes

  • в—Џ Autonegotiation

Yes

  • в—Џ Autocrossing

Yes

  • в—Џ Industrial Ethernet status LED

Yes

Protocols

 

Number of connections

 

  • в—Џ Number of connections, max.

96; via integrated interfaces of the CPU and connected CPs / CMs

  • в—Џ Number of connections reserved for ES/HMI/web

10

  • в—Џ Number of connections via integrated interfaces

64

  • в—Џ Number of S7 routing paths

16

PROFINET IO Controller

 

Services

 

  • — PG/OP communication

Yes

  • — S7 routing

Yes

  • — Isochronous mode

Yes

  • — Open IE communication

Yes

  • — IRT

Yes

  • — MRP

Yes; As MRP redundancy manager and/or MRP client; max. number of devices in the ring: 50

  • — PROFIenergy

Yes

  • — Prioritized startup

Yes; Max. 32 PROFINET devices

  • — Number of connectable IO Devices, max.

128; In total, up to 256 distributed I/O devices can be connected via PROFIBUS or PROFINET

  • — Of which IO devices with IRT, max.

64

  • — Number of connectable IO Devices for RT, max.

128

  • — of which in line, max.

128

  • — Number of IO Devices that can be simultaneously activated/deactivated, max.

8

  • — Number of IO Devices per tool, max.

8

  • — Updating times

The minimum value of the update time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data

Update time for IRT

 

  • — for send cycle of 250 µs

250 Ојs to 4 ms; Note: In the case of IRT with isochronous mode, the minimum update time of 625 µs of the isochronous OB is decisive

  • — for send cycle of 500 µs

500 Ојs to 8 ms; Note: In the case of IRT with isochronous mode, the minimum update time of 625 µs of the isochronous OB is decisive

  • — for send cycle of 1 ms

1 ms to 16 ms

  • — for send cycle of 2 ms

2 ms to 32 ms

  • — for send cycle of 4 ms

4 ms to 64 ms

  • — With IRT and parameterization of "odd" send cycles

Update time = set "odd" send clock (any multiple of 125 µs: 375 µs, 625 µs ... 3 875 µs)

Update time for RT

 

  • — for send cycle of 250 µs

250 µs to 128 ms

  • — for send cycle of 500 µs

500 µs to 256 ms

  • — for send cycle of 1 ms

1 ms to 512 ms

  • — for send cycle of 2 ms

2 ms to 512 ms

  • — for send cycle of 4 ms

4 ms to 512 ms

PROFINET IO Device

 

Services

 

  • — PG/OP communication

Yes

  • — S7 routing

Yes

  • — Isochronous mode

No

  • — Open IE communication

Yes

  • — IRT

Yes

  • — MRP

Yes

  • — PROFIenergy

Yes

  • — Shared device

Yes

  • — Number of IO Controllers with shared device, max.

4

SIMATIC communication

 

  • в—Џ S7 communication, as server

Yes

  • в—Џ S7 communication, as client

Yes

  • в—Џ User data per job, max.

See online help (S7 communication, user data size)

Open IE communication

 

  • в—Џ TCP/IP

Yes

  • — Data length, max.

64 kbyte

  • — several passive connections per port, supported

Yes

  • в—Џ ISO-on-TCP (RFC1006)

Yes

  • — Data length, max.

64 kbyte

  • в—Џ UDP

Yes

  • — Data length, max.

1 472 byte

  • в—Џ DHCP

No

  • в—Џ SNMP

Yes

  • в—Џ DCP

Yes

  • в—Џ LLDP

Yes

Web server

 

  • в—Џ HTTP

Yes; Standard and user-defined pages

  • в—Џ HTTPS

Yes; Standard and user-defined pages

Further protocols

 

  • в—Џ MODBUS

Yes; MODBUS TCP

Media redundancy

 

  • в—Џ Switchover time on line break, typ.

200 ms

  • в—Џ Number of stations in the ring, max.

50

Isochronous mode

 

Isochronous operation (application synchronized up to terminal)

Yes

Equidistance

Yes

S7 message functions

 

Number of login stations for message functions, max.

32

Program alarms

Yes

Number of configurable program alarms

5 000

Number of simultaneously active program alarms

  • в—Џ Number of program alarms

300

  • в—Џ Number of alarms for system diagnostics

100

  • в—Џ Number of alarms for motion technology objects

80

Test commissioning functions

 

Joint commission (Team Engineering)

Yes; Parallel online access possible for up to 3 engineering systems

Status block

Yes; Up to 8 simultaneously (in total across all ES clients)

Single step

No

Status/control

 

  • в—Џ Status/control variable

Yes

  • в—Џ Variables

Inputs, outputs, memory bits, DB, times, counters

  • в—Џ Number of variables, max.

  • — of which status variables, max.

200; per job

  • — of which control variables, max.

200; per job

Forcing

 

  • в—Џ Forcing, variables

Inputs, outputs

  • в—Џ Number of variables, max.

200

Diagnostic buffer

 

  • в—Џ present

Yes

  • в—Џ Number of entries, max.

1 000

  • — of which powerfail-proof

500

Traces

 

  • в—Џ Number of configurable Traces

4; Up to 512 KB of data per trace are possible

Interrupts/diagnostics/status information

 

Diagnostics indication LED

 

  • в—Џ RUN/STOP LED

Yes

  • в—Џ ERROR LED

Yes

  • в—Џ MAINT LED

Yes

  • в—Џ Connection display LINK TX/RX

Yes

Supported technology objects

 

Motion Control

Yes

  • в—Џ Speed-controlled axis

  • — Number of speed-controlled axes, max.

6; Max. number of speed-controlled axes (requirement: there must be no other motion technology objects created)

  • в—Џ Positioning axis

  • — Number of positioning axes, max.

6; Max. number of positioning axes (requirement: there must be no other motion technology objects created)

  • в—Џ Synchronized axes (relative gear synchronization)

  • — Number of axes, max.

3; Max. number of synchronous axes (requirement: there must be no other motion technology objects created)

  • в—Џ External encoders

  • — Number of external encoders, max.

6; Max. number of external encoders (requirement: there must be no other motion technology objects created)

Controller

  • в—Џ PID_Compact

Yes; Universal PID controller with integrated optimization

  • в—Џ PID_3Step

Yes; PID controller with integrated optimization for valves

Counting and measuring

  • в—Џ High-speed counter

Yes

Ambient conditions

 

Ambient temperature during operation

 

  • в—Џ horizontal installation, min.

-25 °C; = Tmin; startup @ -25 °C; startup display @ -20 °C

  • в—Џ horizontal installation, max.

60 °C; Display: 50 °C, at an operating temperature of typically 50 °C, the display is switched off

  • в—Џ vertical installation, min.

-25 °C; = Tmin; startup @ -25 °C; startup display @ -20 °C

  • в—Џ vertical installation, max.

40 °C; Display: 40 °C, at an operating temperature of typically 40 °C, the display is switched off

Ambient temperature during storage/transportation

 

  • в—Џ min.

-40 °C

  • в—Џ max.

70 °C

Altitude during operation relating to sea level

 

  • в—Џ Ambient air temperature-barometric pressure-altitude

Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)

Relative humidity

 

  • в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.

100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation

Use in stationary industrial systems

 

  • — to biologically active substances according to EN 60721-3-3

Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request

  • — to chemically active substances according to EN 60721-3-3

Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!

  • — to mechanically active substances according to EN 60721-3-3

Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!

Configuration

 

Programming

 

Programming language

 

  • — LAD

Yes; incl. failsafe

  • — FBD

Yes; incl. failsafe

  • — STL

Yes

  • — SCL

Yes

  • — GRAPH

Yes

Know-how protection

 

  • в—Џ User program protection/password protection

Yes

  • в—Џ Copy protection

Yes

  • в—Џ Block protection

Yes

Access protection

 

  • в—Џ Password for display

Yes

  • в—Џ Protection level: Write protection

Yes

  • в—Џ Protection level: Read/write protection

Yes

  • в—Џ Protection level: Complete protection

Yes

Cycle time monitoring

 

  • в—Џ lower limit

adjustable minimum cycle time

  • в—Џ upper limit

adjustable maximum cycle time

Dimensions

 

Width

35 mm

Height

147 mm

Depth

129 mm

Weights

 

Weight, approx.

430 g

Other

 

Note:

At temperatures below 0 °C legibility may be restricted and representation of dynamic contents may be slower


















skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Арматура DENDOR

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Датчики и измерители

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Регуляторы и регистраторы

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Пневматическое оборудование

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Краны и Клапаны

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Измерительные приборы

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Системы беспроводного управления «умный дом»

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания

  © ООО "СК ЭНЕРГО" 2007-2022
  (4872) 700-366  skenergo@mail.ru
Яндекс.Метрика