SIPLUS extreme RAIL analog outputs . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS extreme RAIL analog outputs

| | | | | |

Article number		6AG2135-6HD00-4BA1
		SIPLUS ET 200SP AQ 4XU/I ST TX RAIL
General information
Product type designation		AQ 4xU/I ST
Firmware version
в—Џ FW update possible		Yes
usable BaseUnits		BU type A0, A1
Color code for module-specific color identification plate		CC00
Product function
в—Џ I&M data		Yes; I&M0 to I&M3
в—Џ Output range scalable		No
Operating mode
в—Џ Oversampling		No
в—Џ MSO		No
CiR – Configuration in RUN
Reparameterization possible in RUN		Yes
Calibration possible in RUN		No
Supply voltage
Rated value (DC)		24 V
permissible range, lower limit (DC)		19.2 V
permissible range, upper limit (DC)		28.8 V
Reverse polarity protection		Yes
Input current
Current consumption, max.		150 mA
Power loss
Power loss, typ.		1.5 W
Address area
Address space per module
в—Џ Address space per module, max.		8 byte; + 1 byte for QI information
Analog outputs
Number of analog outputs		4; > +60 °C max. 2x ±10 V permissible
Voltage output, short-circuit current, max.		45 mA
Cycle time (all channels), min.		5 ms
Analog output with oversampling		No
Output ranges, voltage
в—Џ 0 to 10 V		Yes; 15 bit
в—Џ 1 V to 5 V		Yes; 13 bit
в—Џ -5 V to +5 V		Yes; 15 bit incl. sign
в—Џ -10 V to +10 V		Yes; 16 bit incl. sign
Output ranges, current
в—Џ 0 to 20 mA		Yes; 15 bit
в—Џ -20 mA to +20 mA		Yes; 16 bit incl. sign
в—Џ 4 mA to 20 mA		Yes; 14 bit
Connection of actuators
в—Џ for voltage output two-wire connection		Yes
в—Џ for voltage output four-wire connection		Yes
в—Џ for current output two-wire connection		Yes
Load impedance (in rated range of output)
в—Џ with voltage outputs, min.		2 kв„¦
в—Џ with voltage outputs, capacitive load, max.		1 µF
в—Џ with current outputs, max.		500 в„¦
в—Џ with current outputs, inductive load, max.		1 mH
Destruction limits against externally applied voltages and currents
в—Џ Voltages at the outputs		30 V
Cable length
в—Џ shielded, max.		1 000 m; 200 m for voltage output
Analog value generation for the outputs
Integration and conversion time/resolution per channel
в—Џ Resolution with overrange (bit including sign), max.		16 bit
Settling time
в—Џ for resistive load		0.1 ms
в—Џ for capacitive load		1 ms
в—Џ for inductive load		0.5 ms
Errors/accuracies
Linearity error (relative to output range), (+/-)		0.03 %
Temperature error (relative to output range), (+/-)		0.005 %/K
Crosstalk between the outputs, min.		-50 dB
Repeat accuracy in steady state at 25 °C (relative to output range), (+/-)		0.05 %
Operational error limit in overall temperature range
в—Џ Voltage, relative to output range, (+/-)		0.7 %
в—Џ Current, relative to output range, (+/-)		0.7 %
Basic error limit (operational limit at 25 °C)
в—Џ Voltage, relative to output range, (+/-)		0.3 %
в—Џ Current, relative to output range, (+/-)		0.3 %
Isochronous mode
Isochronous operation (application synchronized up to terminal)		No
Interrupts/diagnostics/status information
Diagnostics function		Yes
Substitute values connectable		Yes
Alarms
в—Џ Diagnostic alarm		Yes
Diagnostic messages
в—Џ Monitoring the supply voltage		Yes
в—Џ Wire-break		Yes
в—Џ Short-circuit		Yes
в—Џ Group error		Yes
в—Џ Overflow/underflow		Yes
Diagnostics indication LED
в—Џ Monitoring of the supply voltage (PWR-LED)		Yes; green PWR LED
в—Џ Channel status display		Yes; Green LED
в—Џ for channel diagnostics		No
в—Џ for module diagnostics		Yes; green/red DIAG LED
Potential separation
Potential separation channels
в—Џ between the channels		No
в—Џ between the channels and backplane bus		Yes
в—Џ between the channels and the power supply of the electronics		Yes
Isolation
Isolation tested with		707 V DC (type test) and according to EN 50155 (routine test)
Standards, approvals, certificates
Railway application
в—Џ EN 50121-3-2		Yes; EMC for rail vehicles
в—Џ EN 50121-4		Yes; EMC for signal and telecommunications systems
в—Џ EN 50124-1		Yes; Railway applications - overvoltage category OV2; pollution degree PD2; rated surge voltage UNi = 0.5 kV; UNm = 24 V DC
в—Џ EN 50125-1		Yes; Rail vehicles - see ambient conditions
в—Џ EN 50125-2		Yes; Stationary electrical equipment - see ambient conditions
в—Џ EN 50125-3		Yes; Signal and telecommunications systems - see ambient conditions; vibrations and shocks: Application point outside of tracks (1 m to 3 m away from track)
в—Џ EN 50155		Yes; Rail vehicles - temperature class Tx, horizontal mounting position, salt spray Class ST2
в—Џ EN 61373		Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B
в—Џ Fire protection acc. to EN 45545-2		Yes; Rail vehicles - verification on request
Ambient conditions
Ambient temperature during operation
в—Џ horizontal installation, min.		-40 °C; = Tmin
в—Џ horizontal installation, max.		70 °C; = Tmax; +85 °C for 10 min (Tx acc. to EN 50155)
Altitude during operation relating to sea level
в—Џ Ambient air temperature-barometric pressure-altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)
Relative humidity
в—Џ With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Use in stationary industrial systems
вЂ” to biologically active substances according to EN 60721-3-3		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
вЂ” to chemically active substances according to EN 60721-3-3		Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-3		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Use on land craft, rail vehicles and special-purpose vehicles
вЂ” to biologically active substances according to EN 60721-3-5		Yes; Class 5B2 mold, fungus and dry rot spores (with the exception of fauna); Class 5B3 on request
вЂ” to chemically active substances according to EN 60721-3-5		Yes; Class 5C3 (RH < 75%) including salt spray according to EN 50155 (ST2). The supplied plug covers must remain in place over the unused interfaces during operation!
вЂ” to mechanically active substances according to EN 60721-3-5		Yes; Class 5S3 including sand and dust. The supplied plug covers must remain in place over the unused interfaces during operation!
Dimensions
Width		15 mm
Height		73 mm
Depth		58 mm
Weights
Weight, approx.		31 g
Other
Note:		For use in railway applications, also observe the product information "SIPLUS extreme RAIL" A5E37661960A Online Support article 109736776

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания